Green hydrogen production from renewably powered water electrolysis is considered as an ideal approach to decarbonizing the energy and industry sectors. Given the high-cost supply of ultra-high-purity water, as well as the mismatched distribution of water sources and renewable energies, combining seawater electrolysis with coastal solar/offshore wind power is attracting increasing interest for large-scale green hydrogen production. However, various impurities in seawater lead to corrosive and toxic halides, hydroxide precipitation, and physical blocking, which will significantly degrade catalysts, electrodes, and membranes, thus shortening the stable service life of electrolyzers. To accelerate the development of seawater electrolysis, it is crucial to widen the working potential gap between oxygen evolution and chlorine evolution reactions and develop flexible and highly efficient seawater purification technologies. In this review, we comprehensively discuss present challenges, research efforts, and design principles for direct/indirect seawater electrolysis from the aspects of materials engineering and system innovation. Further opportunities in developing efficient and stable catalysts, advanced membranes, and integrated electrolyzers are highlighted for green hydrogen production from both seawater and low-grade water sources.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acsnano.3c08450 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Enhanced oxygen evolution reaction through improved lattice oxygen activity via carbon dots incorporation into MOFs.
J Colloid Interface Sci
January 2025
School of Materials Science and Engineering, State Key Laboratory of Marine Resource Utilization in South China Sea, Hainan University, Haikou, Hainan 570228, China. Electronic address:
Emerging of the lattice oxygen mechanism (LOM) provides a new opportunity for enhancing oxygen evolution reaction (OER) activity. However, its stability suffers from metal cation dissolution and lattice oxygen anionic redox chemistry. In this paper, carbon dots (CDs)-modified nickel-iron MOF (Metal-Organic Framework) nanosheets (NiFe-BDC/CDs) were prepared for efficient OER electrocatalysis.
View Article and Find Full Text PDFElectrochemical deposition of bimetallic sulfides on novel BDD electrode for bifunctional alkaline seawater electrolysis.
Sci Rep
January 2025
FEMTO-ST Institute (UMR CNRS 6174), UBFC/UTBM. Site de Montbéliard, 90010, Belfort, France.
Seawater electrolysis is an ideal technology for obtaining clean energy-green hydrogen. Developing efficient bifunctional catalysts is crucial for hydrogen production through direct seawater electrolysis. Currently, metal substrates loaded with active catalysts are widely employed as electrodes for seawater electrolysis.
View Article and Find Full Text PDFComprehensive Chlorine Suppression: Advances in Materials and System Technologies for Direct Seawater Electrolysis.
Nanomicro Lett
January 2025
State Key Laboratory of Heavy Oil Processing, College of New Energy, China University of Petroleum (East China), Qingdao, 266580, People's Republic of China.
Seawater electrolysis offers a promising pathway to generate green hydrogen, which is crucial for the net-zero emission targets. Indirect seawater electrolysis is severely limited by high energy demands and system complexity, while the direct seawater electrolysis bypasses pre-treatment, offering a simpler and more cost-effective solution. However, the chlorine evolution reaction and impurities in the seawater lead to severe corrosion and hinder electrolysis's efficiency.
View Article and Find Full Text PDFPolycalmagite Coating Enables Long-Term Alkaline Seawater Oxidation Over NiFe Layered Double Hydroxide.
Small
January 2025
College of Chemistry, Chemical Engineering and Materials Science, Shandong Normal University, Jinan, Shandong, 250014, China.
Renewable energy-powered seawater electrolysis is a green and attractive technique for producing high-purity hydrogen. However, severe chlorideions (Cl) and their derivatives tend to corrode anodic catalysts at ampere-level current densities and hinder the application of seawater-to-H systems. Herein, a polycalmagite (PCM)-coated NiFe layered double hydroxide is presented on Ni foam (NiFe LDH@PCM/NF) that exhibits exceptional stability in alkaline seawater.
View Article and Find Full Text PDFRu@MnO core@shell nanowires as a bifunctional electrocatalyst for efficient solar-driven seawater splitting.
Chem Commun (Camb)
January 2025
Wenzhou Key Lab of Advanced Energy Storage and Conversion, Zhejiang Province Key Lab of Leather Engineering, College of Chemistry and Materials Engineering, Wenzhou University, Wenzhou, Zhejiang 325035, China.
Seawater electrolysis technology for hydrogen production has attracted worldwide attention due to the abundant seawater resources. Herein, we proposed core-shell Ru@MnO nanowires (NWs) with α/β-MnO NWs as the core and amorphous Ru as the shell, in which the Ru@α-MnO NWs exhibited lower overpotential and better stability. More importantly, they can operate stably as a bifunctional catalyst for more than 250 h and maintain excellent catalytic performance when driven by solar energy.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!