The advantages of rubber concrete (RC) are good ductility, fatigue resistance, and impact resistance, but few studies have been conducted on the effects of different rubber admixtures on the strength of RC and the cracking performance of rubber mortar. In this study, the compressive and flexural tests of rubber concrete and the crack resistance test of rubber mortar were carried out by changing the rubber content and adding expansion agent and retarder in this test. The test results show that the strength of RC decreases with the increase in rubber admixture. At 15% of rubber admixture, the expansion agent and retarder increase the compressive strength and flexural strength of RC the most; the compressive strength increased to 116% (22.6 MPa) and 109% (21.2 MPa), and the flexural strength increased to 111% (4.02 MPa) and 116%. (4.21 MPa). At the same rubber admixture, the expander improves the cracking time of the rubber mortar by about 3 times, and the retarder improves the cracking time of the rubber mortar by about 1.6 times. The BP neural network (BPNN) was established to simulate and predict the compressive and flexural strengths of RC with different admixtures and the cracking time of rubber mortar. The simulation results show that the predicted 7-day compressive strength of RC fits best with the actual value, with a value of 0.994, and the predicted 28-day flexural strength was closest to the measured value, with an average relative error of 1.7%. It was shown that the calculation results of the artificial intelligence prediction model are more accurate. The simulation results and test results show that the expander and retarder significantly improve the strength of RC as well as the cracking performance of rubber mortar.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10647635PMC
http://dx.doi.org/10.3390/ma16216976DOI Listing

Publication Analysis

Top Keywords

rubber mortar
24
rubber
14
cracking performance
12
performance rubber
12
rubber concrete
12
rubber admixture
12
compressive strength
12
flexural strength
12
cracking time
12
time rubber
12

Similar Publications

Styrene-Butadiene Rubber Latex Modified Mortars Prepared with High Early Strength Portland Cement.

Materials (Basel)

December 2024

Institute of Building Materials, Faculty of Civil Engineering, Vilnius Gediminas Technical University (VILNIUS TECH), 10223 Vilnius, Lithuania.

The increased early hydration rate of high early strength cement has economic advantages in many civil engineering fields (faster formwork removal or earlier demoulding of precast elements). Styrene-butadiene rubber (SBR) latex is the most common polymer in aqueous dispersions suitable for admixing in cement-based materials. It allows the designing of structures with specific properties for a variety of applications.

View Article and Find Full Text PDF

A composite material comprising expanded polystyrene (EPS), granulated tyre rubber (GTR), and a compatibilizer is demonstrated as a possible replacement for fine and coarse agglomerates in mortar and concrete systems, respectively. Two different polymer blending processes (solvent/low shear blending and melt/high shear blending) are used, and the resulting composite material utilized as aggregate to replace sand and cement for mortar and concrete block development. Critical properties such as workability, compressive and flexural strengths, water absorption, bulk density, and porosity are measured before and after aggregate replacement.

View Article and Find Full Text PDF

Impact of Different Post-Curing Temperatures on Mechanical and Physical Properties of Waste-Modified Polymer Composites.

Materials (Basel)

October 2024

Departamento de Engenharia Civil, Universidade Federal de Ouro Preto, Campus Morro do Cruzeiro, Ouro Preto 35400-000, Brazil.

One of the key trends affecting the future of the construction industry is the issue of ecology; therefore, current activities in construction aim to reduce the use of raw materials, which is made possible by including recycled materials in composites, among other methods. This article describes the results of tests conducted using four types of epoxy composites, i.e.

View Article and Find Full Text PDF

Numerical Simulation of Rubber Concrete Considering Fatigue Damage Accumulation of Cohesive Zone Model.

Materials (Basel)

October 2024

Wuhan Construction Engineering Co., Ltd., Wuhan 430056, China.

Rubber concrete (RC) has been used in fatigue-resistant components due to its durability, yet the numerical simulation of its fatigue properties remains in its early stages. This study proposes a cohesive zone model (CZM) that accounts for the accumulation of fatigue damage at the mesoscale to investigate the fatigue performance of RC. The model integrates static and fatigue damage in the CZM, effectively capturing damage caused by fatigue loading.

View Article and Find Full Text PDF

The COVID-19 pandemic has led to a surge in medical waste generation, posing hazards to both the environment and global health. The impacts of the COVID-19 pandemic's medical waste hazard may persist long after the pandemic itself subsides. Improper disposal of medical waste can contaminate environment, posing risks to ecosystems and public health.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!