Helical magnetic micromotors decorated with nickel ferrocyanide for the active and rapid adsorption of radiocesium in water.

Separating radioactive cesium from nuclear waste and contaminated environments is critical to mitigate radiological hazards. In response to this need, remote-controllable and Cs-selective micromotor adsorbents have been considered as a promising technology for rapid in-situ cleanup while minimizing secondary waste and radiation exposure to workers. In this study, we demonstrate the active and rapid removal of a radioactive contaminant from water by leveraging the magnetic manipulation capabilities of a helical and magnetic Ni micromotor coated with Cs-selective nickel ferrocyanide (NiFC). The use of polyvinyl alcohol fibers as a template enables the straightforward preparation of the helical wire structure, allowing for precise control over the diameter and pitch of the helix through simple twisting with Ni wires. By harnessing Ni ions eluted from the Ni micromotor in an acid solution, we successfully fabricate NiFC-coated Ni (NiFC/Ni) micromotors that exhibit a selective removal efficiency greater than 98% for Cs, even in the presence of high concentrations of competing Na ions. Under the influence of an external magnetic field, the NiFC/Ni micromotor demonstrates rapid motion, achieving a pulling motion (100 body lengths per second) through a magnetic gradient and a tumbling motion (46 body lengths per second) induced by a rotating magnetic field. The tumbling motion of the NiFC/Ni micromotor substantially improves the Cs adsorption rate, resulting in a rate that surpasses that achieved under nonmoving conditions by a factor of 21. This improved adsorption rate highlights the considerable potential of magnetically manipulated micromotor self-propulsion for efficient water-pollution treatment.