Product contamination during mechanochemical synthesis of praziquantel co-crystal, polymeric dispersion and cyclodextrin complex.

This paper aims to evaluate the product contamination by elemental impurities during the mechanochemical synthesis of praziquantel (PZQ) co-crystal, polymeric dispersion and cyclodextrin complex by grinding. To assess that, PZQ was co-ground with malic acid (MA), Poloxamer F-127 (F-127) and hydroxypropyl-β-cyclodextrin (HPβCD) in high-energy vibrational mills using stainless steel and agate grinding tools, applying different processing time (30 and 90 min). Differential scanning calorimetry and X-ray powder diffraction confirmed the formation of the targeted products, regardless of applied processing time and grinding tool type. After digestion of the solid powder products, the levels of selected elemental impurities were analysed by inductively coupled plasma mass spectrometry (ICP-MS). The analysis revealed that the content of Mg, Ca, and V are below the limit of quantification in all samples analysed. The contents of P and Na are not related to the type of ball mill and reaction time, but to the starting materials themselves, considering that Na is found in HPβCD and MA, while P was found in F-127. The detected Si impurities in the co-ground products can be related to the use of the agate balls and jars, while the presence of Cr and Fe can be related to the use of the stainless steel grinding tools. The risk assessment showed that the oral administration of the prepared co-ground products in quantities corresponding to regular PZQ oral doses resulted in only insignificant exposure to Cr. Finally, the use of agate grinding tools should be preferred, as administration of such products results in lower Cr exposure. The presented elemental impurities did not lead to any significant drug degradation as PZQ content at the end of the six-month testing period was still in the range of 95-105 % of the initial content. Regardless, ICP-MS analysis of the elemental impurities should be considered in regular quality control procedures in the development and production of novel pharmaceutical products prepared by grinding.