Introduction: The growing number of endoscopic procedures, frequently requiring single-use disposable instruments, is responsible for the production of a large amount of waste. To this date, the reality of waste production at large European Gastroenterology centers is unknown. This study aimed to estimate the amount of waste due to endoscopic practice at a tertiary center in Portugal.
Methods: We performed a prospective study to calculate the mass (in kg) of residues generated during a period of 5 working days of endoscopic practice. We included residues produced at endoscopy suites, pre and postprocedure areas and during endoscope reprocessing. Residues were categorized as non-dangerous (groups I/II), of biologic risk (group III) and specific hazardous hospital residues (group IV). The production of residues separated for recycling/valorization (paper/card and plastic) was also quantified. The volume of water used for reprocessing an endoscope was also assessed.
Results: During the analyzed period, 241 endoscopic procedures were performed. A total of 443.2 kg of waste (22.6 kg from groups I/II, 266.9 kg from group III and 3.9 kg from group IV) were produced, most from group III (75%). For each endoscopic procedure, 1.8 kg of waste was generated. Of the total waste mass, 17.8% was separated for recycling/valorization. A volume of 55L of water was required for reprocessing one endoscope.
Conclusion: Each endoscopic procedure generated a significant amount of waste and water consumption during reprocessing. These real-life analyses are a pivotal step before implementing effective measures to improve resource utilization and more sustainable practices.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1097/MEG.0000000000002667 | DOI Listing |
Plants (Basel)
January 2025
Research Faculty of Agriculture, Hokkaido University, Sapporo 060-8589, Japan.
This study explores the effects of a subcritical seawater treatment (SST) on buckwheat waste (BW), and the use of the hydrolysate as a liquid fertilizer to improve the growth of lettuce ( L.). Three temperature treatments (110 °C, 170 °C, 230 °C) were used for the SST, and the ionic composition in the seawater achieved the depolymerization and degradation of BW.
View Article and Find Full Text PDFPolymers (Basel)
January 2025
Department of Biotechnology, Biochemistry and Bioengineering, National Research Ogarev Mordovia State University, 430005 Saransk, Russia.
An original design of a simple bioreactor was used to fabricate two tubular, 200 cm long BC structures by culturing B-11267 on a molasses medium. In addition, a tubular BC-based biocomposite with improved mechanical properties was obtained by combining cultivation on the molasses medium with in situ chemical modification by polyvinyl alcohol (PVA). Moreover, the present study investigated the BC production by the B-11267 strain on the media with different molasses concentrations under agitated culture conditions.
View Article and Find Full Text PDFMolecules
January 2025
Centro de Ciências e Tecnologias Nucleares (C2TN), Instituto Superior Técnico, Universidade de Lisboa, E.N. 10 ao km 139.7, 2695-066 Bobadela LRS, Portugal.
The wine industry generates high amounts of waste, posing current environmental and economic sustainability challenges. Grape pomace, mainly composed of seeds, skins, and stalks, contains significant amounts of bioactive compounds and constitutes the main solid residue of this industry. Various strategies are being explored for its valorization, from a circular economy perspective.
View Article and Find Full Text PDFMolecules
January 2025
Yunnan Key Laboratory for Pollution Processes and Control of Plateau Lake-Watersheds, Yunnan Institute of Ecological and Environmental Sciences, Kunming 650034, China.
Diamond-wire sawing silicon waste (DSSW) derived from the silicon wafer sawing process may lead to resource waste and environmental issues if not properly utilized. This paper propounds a simple technique aimed at enhancing the efficiency of hydrogen production from DSSW. The hydrolysis reaction is found to become faster when DSSW is ground.
View Article and Find Full Text PDFMaterials (Basel)
January 2025
Center for Advanced Technologies, Adam Mickiewicz University in Poznań, Uniwersytetu Poznańskiego 10, 61-614 Poznań, Poland.
Recycling end-of-life wind turbines poses a significant challenge due to the increasing number of turbines going out of use. After many years of operation, turbines lose their functional properties, generating a substantial amount of composite waste that requires efficient and environmentally friendly processing methods. Wind turbine blades, in particular, are a problematic component in the recycling process due to their complex material composition.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!