Underground mining of minerals is accompanied by a change in the rock mass geomechanical situation. This leads to the redistribution of stresses in it and the occurrence of unexpected displacements and deformations of the earth's surface. A significant part of the civil and industrial infrastructure facilities are located within the mine sites, where mining and tunneling operations are constantly conducted. Irrational planning of mining operations can lead to loss of stability and destruction of undermined facilities. Therefore, it is important to study the earth's surface deformation processes during mining operations, which ensures safe and sustainable operating conditions. The research objective of this paper is to analyse the behaviour of a natural gas pipeline under the influence of underground mining activities, with a particular focus on understanding the effects of horizontal surface deformations and their potential impact on pipeline safety and structural integrity. Its performance and safety are determined on the basis of the found parameters of the earth's surface horizontal deformations and their comparison with permissible parameters characterizing the conditions for laying pipelines, depending on the mining-geological conditions and the degree of their undermining. Based on determined conditions for the safe undermining of the natural gas pipeline, it has been revealed that in its section between the PK212+40 and PK213+80 (140 m) pickets, the estimated parameters of the earth's surface horizontal deformations exceed their permissible values. This can cause deformation and damage to the pipeline. For the safe operation of the pipeline during the period of its undermining, in order to eliminate the hazardous impact of mining the longwall face, additional protection measures must be applied. It is therefore recommended that the gas pipeline between the PK212 and PK214+20 pickets be opened prior to the displacement process (200 m from the stoping face), thus reducing the density of the gas pipeline-soil system. Recommendations for controlling the earth's surface deformations within the natural gas pipeline route are also proposed, which will ensure premature detection of the negative impact of mining operations.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10630448 | PMC |
http://dx.doi.org/10.1038/s41598-023-46814-5 | DOI Listing |
Heliyon
January 2025
Gas Company of Hormozgan Province, National Iranian Gas Company, Hormozgan, Iran.
The absence of a mercaptan compounds analyzer in natural gas pressure reduction stations (PRS) odorizer leads to inaccuracies in the injection dosage, often resulting in quantities beyond standard limits and consequently increasing odorant consumption. Insufficient odorant levels in natural gas can pose safety risks to consumers, as the gas may become odorless at the end of the pipeline. Therefore, accurate determination of the concentration of key odorant compounds in natural gas can reduce both costs and environmental risks.
View Article and Find Full Text PDFHeliyon
January 2025
Shale Gas Research Institute of PetroChina Southwest Oil & Gas Field Company, Chengdu, Sichuan, 610051, China.
The mechanical properties of multi-lithologic reservoir rock masses are complex, and the failure mechanism is not clear. This research belongs to the field of oil and gas exploration and development. Brazilian splitting, and digital image correlation (DIC) tests were performed to study the mechanical properties and failure mechanism of assemblages containing sandstone, shale, and limestone.
View Article and Find Full Text PDFSensors (Basel)
January 2025
Phillip M. Drayer Electrical Engineering Department, Lamar University, Beaumont, TX 77705, USA.
Automated ultrasonic testing (AUT) is a critical tool for infrastructure evaluation in industries such as oil and gas, and, while skilled operators manually analyze complex AUT data, artificial intelligence (AI)-based methods show promise for automating interpretation. However, improving the reliability and effectiveness of these methods remains a significant challenge. This study employs the Segment Anything Model (SAM), a vision foundation model, to design an AI-assisted tool for weld defect detection in real-world ultrasonic B-scan images.
View Article and Find Full Text PDFMaterials (Basel)
December 2024
Department of Chemical Engineering, Tsinghua University, Beijing 100084, China.
Acid-fracturing technology has been applied to form pathways between deep oil/gas resources and oil production pipelines. The acid fracturing fluid is required to have special slow-release performance, with no acidity at low temperatures, while steadily generating acid at high temperatures underground. At present, commercial acid systems in oilfields present problems such as the uncontrollable release effect, high costs, and significant pollution.
View Article and Find Full Text PDFJMIR Perioper Med
January 2025
Stanford Hospital, Stanford, CA, United States.
Background: Inhalational anesthetic agents are a major source of potent greenhouse gases in the medical sector, and reducing their emissions is a readily addressable goal. Nitrous oxide (NO) has a long environmental half-life relative to carbon dioxide combined with a low clinical potency, leading to relatively large amounts of NO being stored in cryogenic tanks and H cylinders for use, increasing the chance of pollution through leaks. Building on previous findings, Stanford Health Care's (SHC's) NO emissions were analyzed at 2 campuses and targeted for waste reduction as a precursor to system-wide reductions.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!