Background: Augmented reality is a new technology that, when applied to spinal surgery, offers the potential for efficient, safe, and accurate placement of pedicle screws. This study investigated whether augmented reality combined with a guide board improved the safety and accuracy of pedicle screw placement compared to traditional freehand screw placement.
Methods: Four trainers were divided into augmented reality navigation and freehand groups. Each group consisted of a novice and an experienced spine surgeon. A total of 80 pedicle screws were implanted. First, the AR group reconstructed the three-dimensional (3D) model and planned the screw insertion route according to the computed tomography (CT) data of L2 lumbar vertebrae. Next, the Microsoft HoloLens 2 was used to identify the vertebral model, and the planned virtual path was superimposed on the real cone model. Then, the screw was placed according to the projected trajectory. Finally, Micron Tracker was used to measure the deviation of screws from the preoperatively planned trajectory, and pedicle screws were evaluated using the Gertzbein-Robbins scale.
Results: In the augmented reality group, the linear deviation of the experienced doctors and novices was 1.59 ± 0.39 and 1.73 ± 0.52 mm, respectively, and the deviation angle was 2.72 ± 0.61 and 2.87 ± 0.63 degrees, respectively. In the freehand group, the linear deviation of the experienced doctors and novices was 2.88 ± 0.58 and 5.25 ± 0.62 mm, respectively, and the deviation angle was 4.41 ± 1.18 and 7.15 ± 1.45 degrees, respectively. The screw placement accuracy rate was 97.5% in the augmented reality navigation group and 77.5% in the freehand group.
Conclusions: Augmented reality navigation improves the accuracy and safety of pedicle screw implantation compared with the traditional freehand method and can assist inexperienced doctors in successfully completing the surgery.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1055/a-2200-3585 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Motion Hologram: Jointly optimized hologram generation and motion planning for photorealistic 3D displays via reinforcement learning.
Sci Adv
January 2025
State Key Lab of Advanced Optical Communication Systems and Networks, Shanghai Jiao Tong University, Shanghai 200240, China.
Holography is capable of rendering three-dimensional scenes with full-depth control and delivering transformative experiences across numerous domains, including virtual and augmented reality, education, and communication. However, traditional holography presents 3D scenes with unnatural defocus and severe speckles due to the limited space bandwidth product of the spatial light modulator (SLM). Here, we introduce Motion Hologram, a holographic technique that accurately portrays photorealistic and speckle-free 3D scenes.
View Article and Find Full Text PDFTargeting accuracy of neuronavigation: a comparative evaluation of an innovative wearable AR platform vs. traditional EM navigation.
Front Digit Health
January 2025
Department of Information Engineering, University of Pisa, Pisa, Italy.
Wearable augmented reality in neurosurgery offers significant advantages by enabling the visualization of navigation information directly on the patient, seamlessly integrating virtual data with the real surgical field. This ergonomic approach can facilitate a more intuitive understanding of spatial relationships and guidance cues, potentially reducing cognitive load and enhancing the accuracy of surgical gestures by aligning critical information with the actual anatomy in real-time. This study evaluates the benefits of a novel AR platform, VOSTARS, by comparing its targeting accuracy to that of the gold-standard electromagnetic (EM) navigation system, Medtronic StealthStation S7.
View Article and Find Full Text PDFIn the realm of 3D measurement, photometric stereo excels in capturing high-frequency details but suffers from accumulated errors that lead to low-frequency distortions in the reconstructed surface. Conversely, light field (LF) reconstruction provides satisfactory low-frequency geometry but sacrifices spatial resolution, impacting high-frequency detail quality. To tackle these challenges, we propose a photometric stereoscopic light field measurement (PSLFM) scheme that harnesses the strengths of both methods.
View Article and Find Full Text PDFWaveguide coupling design is one of the most challenging topics in augmented reality (AR) near-eye displays (NED). The primary challenge stems from the necessity to simultaneously address two competing factors: the overall volume of the AR system and the occurrence of chromatic aberration. To address this issue, what we believe to be a novel tandem trilayer achromatic metasurface is specifically designed for waveguide coupling in AR NEDs, capable of achieving an achromatic effect in a nanometer-thin layer.
View Article and Find Full Text PDFHolographic displays have the potential to reconstruct natural light field information, making them highly promising for applications in augmented reality (AR), head-up displays (HUD), and new types of transparent three-dimensional (3D) displays. However, current spatial light modulators (SLMs) are constrained by pixel size and resolution, limiting display size. Additionally, existing holographic displays have narrow viewing angles due to device diffraction limits, algorithms, and optical configurations.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!