Membrane bioreactor (MBR) deteriorates due to fouling on the membrane pores, which can reduce the membrane performance. To reduce membrane fouling, the addition of inorganic filler can enhance the antifouling properties. This study investigates two different membrane preparation by thermally induced phase separation (TIPS) and dip coating methods to modify hollow fiber membrane with Silver Nanoparticles (AgNPs)-Zeolites used in MBR for industrial wastewater treatment. Performance was evaluated by analyzing the flux of water and wastewater, rejection, water content, and antifouling properties. Characterization result represented the synthesized silver nanoparticles had similar diffraction peak with commercial AgNPs, then the micrograph of AgNPs and zeolites addition membrane showed that the inorganic material had an octahedral shape representing zeolite crystal and irregular shape representing AgNPs. The addition of zeolites and AgNPs resulted in satisfying performance, increased flux, rejection, and antifouling properties.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10598539PMC
http://dx.doi.org/10.1016/j.heliyon.2023.e21350DOI Listing

Publication Analysis

Top Keywords

antifouling properties
12
membrane
9
hollow fiber
8
fiber membrane
8
membrane silver
8
membrane bioreactor
8
industrial wastewater
8
wastewater treatment
8
reduce membrane
8
silver nanoparticles
8

Similar Publications

A wearable electrochemical sensor utilizing multifunctional hydrogel for antifouling ascorbic acid quantification in sweat.

Anal Chim Acta

February 2025

Key Laboratory of Optic-Electric Sensing and Analytical Chemistry for Life Science, MOE, Shandong Key Laboratory of Biochemical Analysis, College of Chemistry and Molecular Engineering, Qingdao University of Science and Technology, Qingdao, 266042, China. Electronic address:

The accurate and reliable quantification of the levels of disease markers in human sweat is of significance for health monitoring through wearable sensing technology, but the sensors performed in real sweat always suffer from biofouling that cause performance degradation or even malfunction. We herein developed a wearable antifouling electrochemical sensor based on a novel multifunctional hydrogel for the detection of targets in sweat. The integration of polyethylene glycol (PEG) into the sulfobetaine methacrylate (SBMA) hydrogel results in a robust network structure characterized by abundant hydrophilic groups on its surface, significantly enhancing the PEG-SBMA hydrogel's antifouling and mechanical properties.

View Article and Find Full Text PDF

The effectiveness and safety of hemodialysis can be hindered by protein accumulation, mechanical instability of membranes and bacterial infection during the dialytic therapy. Herein, we show that cellulose acetate membranes modified with the low-fouling polymers (namely polyvinylpyrrolidone and polyethylene glycol), followed by the in situ reduction of different densities of silver oxide(I) nanoparticles, can effectively address these limitations. These improvements comprise the enhanced resistance to the protein fouling, improved antimicrobial capabilities against S.

View Article and Find Full Text PDF

Leveraging almost hydrophobic PVDF membrane and in-situ ozonation in O/UF/BAC system for superior anti-fouling and rejection performance in drinking water treatment.

Water Res

January 2025

State Key Joint Laboratory of Environment Simulation and Pollution Control, School of Environment, Tsinghua University, Beijing 100084, China. Electronic address:

The almost hydrophobic PVDF membrane (PVDF matrix) commonly exhibited excellent performance in pollutant rejection but with poor anti-fouling performance. This study intended to develop the rejection performance and enhance anti-fouling of the PVDF membrane in an O/UF/BAC system for high quality water production through leveraging the advantages of in-situ ozonation and the nature of the PVDF membrane. Reduced density gradient (RDG) analysis demonstrated that the PVDF membrane exhibited excellent ozone resistance by reducing hydrogen bonds and electrostatic interactions between the membrane surface and ozone.

View Article and Find Full Text PDF

Antifouling zwitterionic materials have extensive applications in the biomedical field. This study designed and successfully synthesized a novel poly(carboxybetaine) diacrylate (PCBDA) via cationic ring-opening polymerization of 2-methyl-2-oxazine, chain modification by the Michael reaction, and chain end transformation to acrylate. The cross-linker was obtained with a tunable molecular weight.

View Article and Find Full Text PDF

Zwitterionic polymers have garnered significant attention for their distinctive properties, such as biocompatibility, antifouling capabilities, and resistance to protein adsorption, making them promising candidates for a wide range of applications, including drug delivery, oil production inhibitors, and water purification membranes. This study reports the synthesis and characterization of zwitterionic monomers and polymers through the modification of linear, vinyl, and aromatic heterocyclic functional groups via reaction with 1,3-propanesultone. Four zwitterionic polymers with varying molecular structures-ranging from linear to five and six membered ring systems-were synthesized: poly(sulfobetaine methacrylamide) (pSBMAm), poly(sulfobetaine-1-vinylimidazole) (pSB1VI), poly(sulfobetaine-2-vinylpyridine) (pSB2VP), and poly(sulfobetaine-4-vinylpyridine) (pSB4VP).

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!