Synergistic Interfacial Engineering of Heterostructured Cobalt Phosphide Spheres/Cobalt Hydroxide Nanosheets for Overall Water Splitting.

Inorg Chem

Jiangsu Key Laboratory of Advanced Catalytic Materials and Technology, School of Petrochemical Engineering, Changzhou University, Changzhou, Jiangsu 213164, China.

Published: November 2023

AI Article Synopsis

Article Abstract

Recently, transition metal phosphides (TMPs) have been widely explored for the hydrogen evolution reaction (HER) due to their advantaged activity. Nevertheless, the OER performance of TMPs in an alkaline medium is still unsatisfactory. Therefore, interfacial engineering of TMPs to enhance the OER performance is highly desirable. Herein, a Co(OH) nanosheet coupled with a CoP sphere supported on nickel foam (NF) is developed by a simple two-step electrodeposition. The large surface area derived from stacked nanosheets and the electronic regulation induced by heterostructure can significantly enhance charge/mass transfer and expose more active sites, thus accelerating the kinetics of the reaction. In addition, the strong electronic interaction between CoP and Co(OH) is conducive to the generation of a high valence cobalt center; thus, the electrocatalytic performances toward HER and OER are remarkably improved. Impressively, the optimized CoP/Co(OH)@NF heterostructure obtains an excellent HER and OER performance with low overpotentials of 76 and 266 mV at 10 mA cm, respectively, superior to the commercial Pt/C and RuO. Moreover, the optimized CoP/Co(OH)@NF can afford the lowest cell voltage of 1.58 V to achieve 10 mA cm for alkaline overall water splitting and shows outstanding long-term stability.

Download full-text PDF

Source
http://dx.doi.org/10.1021/acs.inorgchem.3c02656DOI Listing

Publication Analysis

Top Keywords

oer performance
12
interfacial engineering
8
water splitting
8
optimized cop/cooh@nf
8
synergistic interfacial
4
engineering heterostructured
4
heterostructured cobalt
4
cobalt phosphide
4
phosphide spheres/cobalt
4
spheres/cobalt hydroxide
4

Similar Publications

Developing nonprecious metal-based electrocatalysts with exceptional activity and durability for water electrolysis remains a significant challenge. Herein, we report a highly efficient bifunctional electrocatalyst composed of sulfur-doped vanadium metal-organic frameworks (S@V-MOF) integrated with multiwalled carbon nanotubes (MWCNTs) to promote the synergistic effect between S@V-MOF and MWCNTs and modulate the electronic structure of the catalyst, which eventually enhanced its electrocatalytic performance. The S@V-MOF/MWCNT catalyst loaded at the Ni foam electrode exhibits remarkable activity for both the hydrogen evolution reaction (HER) in acidic media and oxygen evolution reaction (OER) in alkaline media, requiring overpotentials of 48 and 227 mV, respectively, to reach a current density of 10 mA cm.

View Article and Find Full Text PDF

Revealing the Surface Reconstruction on the High OER Catalytic Activity of Ni3S2.

ChemSusChem

January 2025

Sun Yat-Sen University, School of Materials Science and Engineering, No. 135, Xingang Xi Road, China, 510006, Guangzhou, CHINA.

Sluggish oxygen evolution reaction (OER) is a crucial part of water splitting and solar fuel generation, which limits their utilization. Ni3S2 is a promising OER catalyst, in which surface reconstruction is an important step to improve performance. In this study, DFT calculations were employed to investigate the effect of surface reconstruction on (001), (110), and (101) surfaces of Ni3S2 in alkaline OER.

View Article and Find Full Text PDF

Although performance enhancements due to trace Fe incorporation into Ni catalysts for the oxygen evolution reaction (OER) have been well documented, the effects of trace versus bulk Fe incorporation into Ni catalysts for the ethanol oxidation reaction (EOR)─a promising anodic alternative to OER─are unclear. Herein, we perform extensive cyclic voltammetry experiments on Ni-based thin films to show that trace Fe incorporation from electrolyte impurities has a minimal impact on EOR performance, while codeposited Fe significantly suppresses catalytic current (by half at 1.5 V).

View Article and Find Full Text PDF

In the realm of zinc-air batteries, high bifunctional catalytic efficacy is intimately tied to the evaluation of catalysts. Consequently, the pursuit of proficient bifunctional catalysts that can efficiently catalyze both the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) remains a paramount objective in this research area. In this study, the spiny cobalt tetroxide (CoO) encapsulated hollow carbon spheres (HCSs) are constructed by anchoring CoO onto HCS via hydrothermal or annealing treatment.

View Article and Find Full Text PDF

Atomic Imaging of the Surface Termination and Reconstruction of Low and High Index Iridium Oxide Surfaces and Insights into Their Facet-Dependent Oxygen Evolution Activities.

ACS Appl Mater Interfaces

January 2025

Institute of Materials Research, Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen 518055, Guangdong, PR China.

Resolving the atomic surface structure, particularly surface termination or reconstruction, is essential for understanding the catalytic properties of metal oxides. Although rutile phase iridium dioxide (IrO) is the state-of-the-art electrocatalyst for the oxygen evolution reaction (OER) in water splitting, the atomic-level surface structures of IrO remain largely unexplored, limiting our understanding of its facet-dependent OER activities. Herein, we perform aberration-corrected integrated differential phase contrast scanning transmission electron microscopy of the low- and high-index surface structures of spindle-shaped IrO nanorods and reveal distinct surface terminations and/or reconstructions on different surfaces.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!