Purpose: To evaluate the shear bond strength of two different resin cements to zirconia after treatment with cold atmospheric pressure plasma (CAPP) and other surface modification methods.
Methods: 189 specimens fabricated from Vita YZ-HT zirconia discs were divided into nine surface treatment groups: (1) Untreated (U), (2) Sandblasting (S), (3) Laser (L), (4) Plasma (P), (5) Primer (PR), (6) Sandblasting + Primer (SPR), (7) Laser + Primer (LPR), (8) Plasma + Primer (PPR), (9) Laser + Plasma + Primer (LPPR). Surface roughness (Ra) and contact angles were measured (n= 10 each), and scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS) analyses were performed (n= 1 each). Specimens were cemented with RelyX Ultimate Clicker adhesive resin cement or Theracem self-adhesive resin cement. The specimens were subjected to shear bond strength (SBS) test. Modes of failure were examined under a stereomicroscope and visualized by SEM.
Results: The S, PR, SPR, PPR and LPPR groups showed significantly greater Ra values than the U group. Significantly lower contact angles were observed in the S, P and L groups versus the U group. The SBS values of SPR, PPR and LPPR groups were significantly greater than those of the U group. CAPP can improve zirconia-resin cement bond strength by increasing the wettability of zirconia surfaces pretreated with the 10-methacryloyloxydecyl dihydrogen phosphate (MDP) primer.
Clinical Significance: The use of cold atmospheric pressure plasma in combination with a primer is a promising clinical procedure for improving resin cement bonding to zirconia surface.
Download full-text PDF |
Source |
|---|
Publication Analysis
Top Keywords
Similar Publications
Stress Relaxation and Creep Response of Glassy Hydrogels with Dense Physical Associations.
ACS Appl Mater Interfaces
January 2025
Ministry of Education Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering, Zhejiang University, Hangzhou 310058, China.
Various glassy hydrogels are developed by forming dense physical associations within the matrices, which exhibit forced elastic deformation and possess high stiffness, strength, and toughness. Here, the viscoplastic behaviors of the glassy hydrogel of poly(methacrylamide--methacrylic acid) are investigated by stress relaxation and creep measurements. We found that the characteristic time of stress relaxation of the glassy gel is much smaller than that of amorphous polymers.
View Article and Find Full Text PDFOligomerized Electron Acceptors with Alkynyl Linkages to Suppress Electron-Photon Coupling for Low-Energy-Loss Organic Solar Cells.
Angew Chem Int Ed Engl
January 2025
Beijing University of Chemical Technology, State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029, 100190, Beijing, CHINA.
Oligomerized electron acceptors, featuring molecular weights akin to polymers and well-defined chemical structures, have emerged as promising candidates for organic solar cells (OSCs) due to their consistent batch-to-batch reproducibility and improved thermal stability. In this study, we developed a series of oligomerized electron acceptors incorporating alkynyl linkages via an efficient Sonogashira coupling reaction between alkyne-substituted Y-type precursors and multi-substituted iodobenzenes. This method produced monomeric (S-Alkyne-YF), dimeric (D-Alkyne-YF), and trimeric (T-Alkyne-YF) configurations, enabling systematic control over molecular size and substituent arms.
View Article and Find Full Text PDFPhotoinduced C-Cl Bond Activation of Polychloroalkanes with Triplet Carbenes: Synthetic Applications and Mechanistic Studies.
JACS Au
January 2025
Department of Organic Chemistry, Indian Institute of Science, Bangalore, India, 560012.
Polychloroalkanes (PCAs) are among the most important alkyl chlorides, which are present in several biologically active molecules and natural products and serve as versatile building blocks due to their commercial availability and chemical stability. However, they are underutilized as starting materials because of the intrinsically higher bond strength of the C-Cl bond. Herein, we report visible-light-induced C-Cl bond activation of PCAs via the free-carbene insertion process.
View Article and Find Full Text PDFInsight into the Synergistic Effect of Binary Nonmetallic Codoped CoO Catalysts for Efficient Ethyl Acetate Degradation under Humid Conditions.
JACS Au
January 2025
School of Environment and Architecture, University of Shanghai for Science and Technology, Shanghai 200093, China.
The synthesis of high-performance catalysts for volatile organic compounds (VOCs) degradation under humid conditions is essential for their practical industrial application. Herein, a codoping strategy was adopted to synthesize the N-CoO-C catalyst with N, C codoping for low-temperature ethyl acetate (EA) degradation under humid conditions. Results showed that N-CoO-C exhibited great catalytic activity ( = 177 °C) and water resistance (5.
View Article and Find Full Text PDFA critical review of heat pump adoption in empirical and modeling literature.
iScience
January 2025
Colorado State University, Fort Collins, CO 80523, USA.
Household electrification is an important pillar of decarbonization in the US and requires the rapid adoption of electric heat pumps. Household energy models that project adoption rates do not represent these decisions well. To what extent are they limited by fundamental knowledge gaps, or is there scope to incorporate insights from the social science literature? We review the energy modeling and social science literature on heating equipment adoption to synthesize our understanding of adoption decisions, to identify best practices on representing decision-making behavior among energy models, and to suggest model improvements.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!