Gangue-based backfill cementitious materials (BCM) are widely applied due to their low CO footprint, while the application is restricted by gangue's low reactivity. In this study, dry chemical modification was developed to modify the gangue, and multiple characterized approaches were used to characterize the dissolution property, mineral composition, and particle size distribution of modified gangue (MCG), as well as the compressive strength and microstructure of BCM. The findings show that the residue weight of MCG stabilized at 2 wt.% of formic acid, and the modification reduces the kaolinite and calcite, resulting in smaller particles. Additionally, the three days compressive strength of the BCM made with MCG was improved from 0.3 MPa to 0.6 MPa. Attributed to the increased reactivity of MCG, it was found that the dissolution weight increased by 2.13%. This study offers a novel method for activating gangue and a new kind of MCG-prepared BCM, which makes a significant contribution towards achieving the UN Sustainable Development Goals.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10574626 | PMC |
http://dx.doi.org/10.3390/ma16196609 | DOI Listing |
Chemosphere
November 2024
Department of Earth and Environmental Sciences, Korea University, Seoul, 02841, Republic of Korea. Electronic address:
Leveraging natural waste materials for inorganic contaminant removal in solution offers a novel approach to boost resource recycling and foster sustainable development by enhancing waste use. This research advanced the modest arsenite (As[III]) removal capacity of raw coal gangue through a magnesium-soaking and calcination-based surface modification. Batch experiments showed As(III) removal efficiency was improved from 39.
View Article and Find Full Text PDFEnviron Sci Pollut Res Int
October 2024
College of Environmental Sciences and Engineering, Beijing Key Laboratory for Solid Waste Utilization and Management, Peking University, Beijing, 100871, China.
The persistent reliance on coal has resulted in the accumulation of substantial coal gangue, a globally recognized problematic solid waste with environmental risks. Given the coal gangue properties and global land degradation severity, the resourceful utilization of coal gangue as soil conditioners is believed to be a universally applicable, cost-effective, high-demand and environment-friendly model with broad application prospect. The direct application of raw coal gangue faces challenges of low active beneficial ingredients, inadequate water and fertilizer retention, presence of potentially toxic elements, resulting in limited efficacy and environmental contamination.
View Article and Find Full Text PDFPolymers (Basel)
July 2024
College of Materials Science & Engineering, Taiyuan University of Technology, Taiyuan 030024, China.
This study aims to provide a high-value and environmentally friendly method for the application of coal-based solid waste. Modified fly ash/polyurethane (MFA/PU) and modified coal gangue powder/polyurethane (MCG/PU) composites were prepared by adding different contents of MFA and MCG (10%, 20%, 30%, 40%). At the filler content of 30%, the compressive strengths of MFA/PU and MCG/PU are 84.
View Article and Find Full Text PDFMolecules
May 2024
College of Civil Engineering, Liaoning Technical University, Fuxin 123000, China.
Efficient and thorough treatment of dye wastewater is essential to achieve ecological harmony. In this study, a new type of calcium-based modified coal gangue (Ca-CG) was prepared by using solid waste coal gangue as raw material and a CaCl modifier, which was used for the removal of malachite green, methylene blue, crystal violet, methyl violet and other dyes in water. When the dosage of Ca-CG was 1-5 g/L, the dosage of Ca-CG was the main factor affecting the dye adsorption effect.
View Article and Find Full Text PDFEnviron Sci Pollut Res Int
April 2024
Maanshan Iron and Steel Co., Ltd., Maanshan, China.
Indirect carbonation of steel slag is an effective method for CO storage, reducing emissions, and promoting cleaner production in the steel industry. However, challenges remain, such as low Ca leaching rates and slag management complexities arising from variations in mineral compositions. To address this, a high-temperature modification process is proposed to alter the mineral composition and facilitate the synergistic utilization of calcium and iron.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!