Fiber Bragg gratings (FBGs) inscribed in hollow-core fibers hold a potential to revolutionize the field of gas photonics by enhancing the performance and versatility of hollow-core fiber-based matter cells. By effectively transforming these cells into cavities, FBGs can significantly extend the effective length of light-matter interactions. Traditional FBG inscription methods cannot be extended to hollow-core fibers, because light in the fundamental mode is predominantly confined to the hollow region where an index change cannot be induced. In this Letter, we propose a bi-thickness dual-ring hollow-core antiresonant fiber (DRHCF) design that achieves substantial overlap between the fundamental mode and cladding glass in a well-controlled manner, ensuring a strong FBG response with a minimal insertion loss. Through detailed numerical investigations, we demonstrate the feasibility of creating a high reflection FBG in the DRHCF using standard FBG inscription techniques. The proposed device is expected to have a length of <1 cm and the insertion loss of <0.3 dB, including splice loss.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/OL.501173 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
FBG-based Shape-Sensing to Enable Lateral Deflection Methods of Autonomous Needle Insertion.
Rep U S
October 2024
Department of Mechanical Engineering, Johns Hopkins University, Baltimore, MD, USA.
In diagnosing and treating prostate cancer the flexible bevel tip needle insertion surgical technique is commonly used. Bevel tip needles experience asymmetric loading on the needle's tip, inducing natural bending of the needle and enabling control mechanisms for precise placement of the needle during surgery. Several methods leverage the needles natural bending to provide autonomous control of needle insertion for accurate needle placement in an effort to reduce excess tissue damage and improve patient outcomes from needle insertion intraventions.
View Article and Find Full Text PDFSmart Concrete Using Optical Sensors Based on Bragg Gratings Embedded in a Cementitious Mixture: Cure Monitoring and Beam Test.
Sensors (Basel)
December 2024
Graduate Program in Electrical Engineering, Federal University of Espírito Santo, Vitória 29075-910, ES, Brazil.
Smart concrete is a structural element that can combine both sensing and structural capabilities. In addition, smart concrete can monitor the curing of concrete, positively impacting design and construction approaches. In concrete, if the curing process is not well developed, the structural element may develop cracks in this early stage due to shrinkage, decreasing structural mechanical strength.
View Article and Find Full Text PDFDamage and Failure Monitoring of Aerospace Insulation Layers Based on Embedded Fiber Bragg Grating Sensors.
Polymers (Basel)
December 2024
Research Institute of Aero-Engine, Beijing University of Aeronautics and Astronautics, Beijing 102206, China.
Carbon fiber-reinforced polymer (CFRP) composites are widely used in aviation thermal insulation layers due to their high strength-to-weight ratio and excellent high-temperature performance. However, challenges remain regarding their structural integrity and durability under extreme conditions. This study first employed finite element simulation to model the damage evolution of CFRP laminated plates under axial tensile loads and their thermal decomposition behavior in high-temperature environments, providing a theoretical reference.
View Article and Find Full Text PDFResidual Stress Analysis at the Conductor-Insulator Interface During the Curing Process of Hair-Pin Motors.
Polymers (Basel)
December 2024
School of Mechanical and Electrical Engineering, Changchun University of Science and Technology, Changchun 130022, China.
The curing process of hair-pin motor stator insulation is critical, as residual stress increases the risk of partial discharge and shortens a motor's lifespan. However, studies on the stress-induced defects during insulation varnish curing remain limited. This research integrates three-dimensional numerical simulations and experimental analysis to develop a curing model based on unsaturated polyester imide resin, aiming to explore the mechanisms of residual stress formation and optimization strategies.
View Article and Find Full Text PDFLow-threshold surface-emitting colloidal quantum-dot circular Bragg laser array.
Light Sci Appl
January 2025
State Key Laboratory of Optical Fiber and Cable Manufacture Technology, Institute of Nanoscience and Applications, Department of Electrical and Electronic Engineering, Southern University of Science and Technology, Shenzhen, China.
Colloidal quantum dots (CQDs) are attractive gain media due to their wavelength-tunability and low optical gain threshold. Consequently, CQD lasers, especially the surface-emitting ones, are promising candidates for display, sensing and communication. However, it remains challenging to achieve a low-threshold surface-emitting CQD laser array with high stability and integration density.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!