In laparoscopic surgery, quality of haptic feedback is reduced compared to conventional surgery, leading to unintentional tissue damage during grasping. From the perspective of haptics, poor mechanical design of laparoscopic instrument joints induces friction and a nonlinear actuation-tip force relation. In this study, a novel laparoscopic grasper using compliant joints and a magnetic balancer is presented, and the reduction in hysteresis and friction is evaluated. The hysteresis loop of the novel compliant grasper and two conventional laparoscopic graspers (high quality leading commercial brand and low quality unbranded grasper) were measured. In order to assess quality of haptic feedback, the lowest grasper tip load perceivable by instrument users was measured with the novel and the conventional laparoscopic graspers. The hysteresis loop measurement yielded a mechanical efficiency of 43% for the novel grasper, compared to- 25% and 23% for the Aesculap and the unbranded grasper, respectively. The forces perceivable by the user through the novel grasper were significantly lower (mean 1.37N, SD 0.44N) than those of conventional graspers (mean 2.15N, SD 0.71N and mean 2.65N, SD 1.20N, respectively). The balanced compliant grasper technology has the ability to improve the quality of haptic feedback compared to conventional laparoscopic graspers. Research is needed to relate these results to soft and delicate tissue grasping in a clinical setting, for which this instrument is intended.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10561751 | PMC |
http://dx.doi.org/10.1109/JTEHM.2023.3291925 | DOI Listing |
Sensors (Basel)
January 2025
2Ai, School of Technology, IPCA, 4750-810 Barcelos, Portugal.
Virtual reality (VR) has gained significant attention in various fields including healthcare and industrial applications. Within healthcare, an interesting application of VR can be found in the field of physiotherapy. The conventional methodology for rehabilitating upper limb lesions is often perceived as tedious and uncomfortable.
View Article and Find Full Text PDFEur J Neurosci
January 2025
Human Performance Research Centre, University of Konstanz, Constance, Germany.
Lightly touching a solid object reduces postural sway. Here, we determine the effect of artificially modifying haptic feedback for balance. Participants stood with their eyes closed, lightly gripping a manipulandum that moved synchronously with body sway to systematically enhance or attenuate feedback gain between +2 and -2, corresponding to motion in the same or opposite direction to the body, respectively.
View Article and Find Full Text PDFSensors (Basel)
December 2024
Department of Industrial Design, Guangdong University of Technology, Guangzhou 510006, China.
Research into new solutions for wearable assistive devices for the visually impaired is an important area of assistive technology (AT). This plays a crucial role in improving the functionality and independence of the visually impaired, helping them to participate fully in their daily lives and in various community activities. This study presents a bibliometric analysis of the literature published over the last decade on wearable assistive devices for the visually impaired, retrieved from the Web of Science Core Collection (WoSCC) using CiteSpace, to provide an overview of the current state of research, trends, and hotspots in the field.
View Article and Find Full Text PDFFront Neurosci
December 2024
Research and Exploratory Development Department, Johns Hopkins University Applied Physics Laboratory, Laurel, MD, United States.
Objective: Targeted transcutaneous electrical nerve stimulation (tTENS) is a non-invasive neural stimulation technique that involves activating sensory nerve fibers to elicit tactile sensations in a distal, or referred, location. Though tTENS is a promising approach for delivering haptic feedback in virtual reality or for use by those with somatosensory deficits, it was not known how the perception of tTENS might be influenced by changing wrist position during sensorimotor tasks.
Approach: We worked with 12 able-bodied individuals and delivered tTENS by placing electrodes on the wrist, thus targeting the ulnar, median, and radial nerves, and eliciting tactile sensations in the hand.
Int J Comput Assist Radiol Surg
December 2024
Medical Computing, Kitware Inc, 101 E Weaver St g4, Carrboro, NC, 27510, USA.
Purpose: The oral and maxillofacial (OMF) surgical community is making an active effort to develop new approaches for surgical training in order to compensate for work-hour restrictions, mitigate differences between training standards, and improve the efficiency of learning while minimizing the risks for the patients. Simulation-based learning, a technology adopted in other training paradigms, has the potential to enhance surgeons' knowledge and psychomotor skills.
Methods: We developed a fully immersive, high-fidelity virtual simulation trainer system based on Kitware's open-source visualization and interactive simulation libraries: the Interactive Medical Simulation Toolkit (iMSTK) and the Visualization Toolkit (VTK).
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!