Purpose: This study investigates the fracture and retention strength of all-ceramic crowns with modified composite resin and ceramic cores compared to conventional casted post and core systems.
Materials And Methods: A prepared human central tooth was initially scanned to design and 3D print the post and core. Subsequently, 40 bovine teeth were adjusted to accommodate the fabricated post and cores. They were then divided into four groups of 10 each: group 1 comprised cast cores without cover (control group), group 2 involved cast cores reduced and replaced with IPS Empress material (IPS group), group 3 consisted of cast cores covered with opaque composite (composite group), and group 4 included cast cores covered with opaque ceramic (ceramic group). Zirconia crowns were cemented onto all samples. After an aging process, pull-off and fracture strength tests were conducted. Fracture strength was determined by applying a compressive force at an angle of 135° to the tooth's longitudinal axis until the fracture occurred. For retention strength assessment, a universal testing machine with a 10 mm/min crosshead speed was employed. The resulting data underwent statistical analysis utilizing two-way analysis of variance (ANOVA) and Mann-Whitney tests.
Results: The analysis revealed no significant difference in fracture strength among the groups (-value = 0.997). However, the retention strength of the control and IPS groups was significantly higher than that of the other groups.
Conclusion: There were no discernible distinctions among the three study methods regarding fracture strength. Nonetheless, the retention strength of the IPS group resembled that of the control group, surpassing that of the composite and ceramic groups.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10560107 | PMC |
| http://dx.doi.org/10.1155/2023/6664894 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
3D nanocomposites of β-TCP-HBO-Cu with improved mechanical and biological performances for bone regeneration applications.
Sci Rep
January 2025
Advanced Glass and Glass Ceramic Research Laboratory, Department of Physics, University of Lucknow, Lucknow, 226007, India.
Recently, 3-D porous architecture of the composites play a key role in cell proliferation, bone regeneration, and anticancer activities. The osteoinductive and osteoconductive properties of β-TCP allow for the complete repair of numerous bone defects. Herein, β-TCP was synthesized by wet chemical precipitation route, and their 3-D porous composites with HBO and Cu nanoparticles were prepared by the solid-state reaction method with improved mechanical and biological performances.
View Article and Find Full Text PDFSuper-strong hydrogel reinforced by an interconnected hollow microfiber network via regulating the water-cellulose-copolymer interplay.
Sci Bull (Beijing)
January 2025
Hubei Biomass-Resource Chemistry and Environmental Biotechnology Key Laboratory, Hubei Provincial Engineering Research Center of Emerging Functional Coating Materials, School of Resource and Environmental Sciences, Wuhan University, Wuhan 430079, China. Electronic address:
The discontinuous fiber reinforced hydrogels are easy to fail due to the fracture of the fiber matrix during load-bearing. Here, we propose a novel strategy based on the synergistic reinforcement of interconnected natural fiber networks at multiple scales to fabricate hydrogels with extraordinary mechanical properties. Specifically, the P(AA-AM)/Cel (P(AA-AM), poly(acrylic acid-acrylamide); Cel, cellulose) hydrogel is synthesized by copolymerizing AA and AM on a substrate of paper with an interconnected hollow cellulose microfiber network.
View Article and Find Full Text PDFBackground: There has been an increase in both primary anatomic (aTSA) and reverse total shoulder arthroplasty (rTSA) over the last decade, with rates peaking for patients aged 75 years and older. Despite aTSA being the mainstay of treatment for patients with glenohumeral arthritis in the absence of rotator cuff insufficiency, there has been an upward trend of rTSA utilization in the elderly due to concerns about rotator cuff integrity, regardless of deformity. The purpose of this study is to evaluate outcomes including pain, function, range of motion, satisfaction, and complications in patients 80 years or older following primary anatomic and reverse total shoulder arthroplasty for osteoarthritis without full thickness rotator cuff tears.
View Article and Find Full Text PDFEnhanced mechanical properties and in vitro bioactivity of silicon nitride ceramics with SiO, YO, and AlO as sintering aids.
J Mech Behav Biomed Mater
January 2025
School of Materials Science and Engineering, University of Jinan, Jinan, 250022, China. Electronic address:
Silicon nitride (Si₃N₄) ceramics exhibit excellent mechanical properties and biocompatibility, making them highly suitable for biomedical applications, particularly in implants. In this study, the mechanical properties and bioactivity of Si₃N₄ ceramics with varying amounts of Y₂O₃-Al₂O₃-SiO₂ sintering aids were investigated. Increasing the sintering additive content from 4 wt% to 8 wt% substantially improved the bulk density of the ceramics, leading to notable enhancements in mechanical properties.
View Article and Find Full Text PDFTrabecular bone deficits predominate in the appendicular skeleton of midlife women living with HIV: findings from a cross-sectional study in Zimbabwe.
J Bone Miner Res
January 2025
MRC Lifecourse Epidemiology Centre, Human Development and Health, University of Southampton, Southampton, United Kingdom.
HIV-related mortality has fallen due to scale-up of antiretroviral therapy (ART), so more women living with HIV (WLH) now live to reach menopause. Menopausal estrogen loss causes bone loss, as do HIV and certain ART regimens. However, quantitative bone data from WLH are few in Africa.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!