Background: All-suture anchors (ASAs) are noted to cause various bone reactions when used in upper limb surgery but clinical implications are unknown.
Methods: 88 shoulders and 151 elbows with a mean follow-up of 47.1 ± 17.7 months were invited for follow-up including clinical examination, questionnaires and radiographs. The anchor drill holes were radiographically assessed.
Results: At final follow up, mean DASH was 12.9 ± 13.8 and mean VAS 2.2 ± 2.4 in the shoulder population. In the elbow group mean MEPS was 91.8 ± 12.7 and mean VAS 1.5 ± 1.9. Implant-specific complications were seen in 10 elbow cases but none in the shoulder group. The mean diameter of the 1.4 mm all-suture anchor drill hole was enlarged to 2.5 ± 1.4 mm in the shoulder group and to 2.9 ± 1.0 mm in the elbow group. 50% of the 1.4 mm anchor drill holes showed abnormal morphology but these morphologic changes did not correlate with clinical outcome, complications or reoperation rate.
Discussion: Satisfying clinical outcomes are found in upper limb surgery using ASAs. Various bone changes are seen after implantation of an ASA, but these are not clinically relevant. Long-term consecutive follow-up data is required.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10557925 | PMC |
http://dx.doi.org/10.1177/17585732221127433 | DOI Listing |
Oper Orthop Traumatol
January 2025
Klinik für Orthopädie und Unfallchirurgie, Martin-Luther-Krankenhaus Berlin, Caspar-Theyss-Str. 27-33, 14193, Berlin, Deutschland.
Objective: Lengthening of the patellar tendon to normalize patellar height and improve knee flexion deficits.
Indications: Flexion deficits in combination with patella baja (Caton index < 0.6).
Surg Neurol Int
December 2024
Department of Neurosurgery, University of California, Irvine, Orange, United States.
Background: Stereoelectroencephalography (SEEG) is a common diagnostic surgical procedure for patients with medically refractory epilepsy. We aimed to describe our initial experience with the recently released NeuroOne Evo SEEG electrode product (Zimmer Biomet, Warsaw, IN) and review technical specifications for other currently approved depth SEEG electrodes.
Methods: We performed a record review on the first five patients implanted with NeuroOne Evo SEEG electrode product using the robotic stereotactic assistance robot platform and described our surgical technique in detail.
Materials (Basel)
December 2024
Cracow University of Technology, Faculty of Chemical Engineering and Technology, Warszawska 24, 31-155 Krakow, Poland.
Direct lithium extraction from unconventional resources requires the development of effective adsorbents. Crown ether-containing materials have been reported as promising structures in terms of lithium selectivity, but data on adsorption in real, highly saline brines are scarce. Crown ether-grafted graphene oxides were synthesized using 2-hydroxymethyl-12-crown-4, hydroxy-dibenzo-14-crown-4 and epichlorohydrin as a source of anchoring groups.
View Article and Find Full Text PDFAm J Sports Med
January 2025
Department of Orthopedics and Rehabilitation, University of Vermont, Burlington, Vermont, USA.
Background: A lateral extra-articular tenodesis (LET) is increasingly being utilized to augment an anterior cruciate ligament reconstruction because it has been shown to reduce the risk of postreconstruction graft failure or recurrent rotatory instability. Various femoral fixation techniques are available, including the use of an interference screw, staple, or suture anchor.
Purpose: To determine and compare the biomechanical properties of an LET graft when using an interference screw, staple, or suture anchor for the femoral fixation for a modified Lemaire LET.
Sci Rep
January 2025
Institute of Mineral Resources Exploitation and Utilization Technology and Equipment, Liaoning Technical University, Fuxin, 123000, Liaoning, China.
Loading water drilling rig on the anchor digging machine can effectively increase the tunneling efficiency. In order to avoid the interference between the water drilling rig and the anchor machine in the working process, it is necessary to calculate the joint variables of the drilling rig accurately. Using the robot kinematics analysis method, the kinematics model of the system is established.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!