AI Article Synopsis
- The study investigates the effects of adding carbon nanotubes (CNTs) at varying concentrations (0.5%, 1%, 3%, and 5%) to improve the properties of polylactic acid (PLA).
- The characterization techniques used, such as FT-IR and TGA, showed that CNTs were uniformly dispersed within the PLA matrix and enhanced its crystallinity.
- Mechanical tests showed that while the incorporation of CNTs increased elongation at break, it slightly decreased tensile strength, with the best performance observed in the PLA-3% CNTs composition in terms of mechanical flexibility and thermal stability.
Article Abstract
The present study focuses on enhancing the mechanical, thermal, and degradation behavior of polylactic acid (PLA) by adding carbon nanotubes (CNTs) with different concentrations of 0.5, 1, 3, and 5%. The CNTs were prepared using catalytic chemical vapor deposition, and the prepared PLA/CNTs nanocomposite films were characterized using techniques such as FT-IR, Raman spectroscopy, TGA, SEM, and XRD. The distinct diffraction patterns of multi-walled carbon nanotubes (MWCNTs) at 2θ angles of 25.7° and 42.7° were no longer observed in the prepared nanocomposites, indicating uniform dispersion of MWCNTs within the PLA matrix. The presence of MWCNTs enhanced the crystallinity of PLA as the CNT loading increased. Mechanical tests demonstrated that incorporating CNTs positively influenced the elongation at the break while decreasing the ultimate tensile strength of PLA. The PLA-3%CNTs composition exhibited the highest elongation at break (51.8%) but the lowest tensile strength (64 MPa). Moreover, thermal gravimetric analysis confirmed that the prepared nanocomposites exhibited greater thermal stability than pure PLA. Among the nanocomposites, PLA-5% CNTs exhibited the highest thermal stability. Furthermore, the nanocomposites demonstrated reduced surface degradation in accelerated weathering tests, with a more pronounced resilience to UV radiation and moisture-induced deterioration observed in PLA-3% CNTs.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10547777 | PMC |
| http://dx.doi.org/10.1038/s41598-023-43660-3 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Efficient Catalysis for Zinc-Air Batteries by Multiwalled Carbon Nanotubes-Crosslinked Carbon Dodecahedra Embedded with Co-Fe Nanoparticles.
Small
January 2025
Institute for Ecological Research and Pollution Control of Plateau Lakes, School of Ecology and Environmental Science, Yunnan University, Kunming, Yunnan, 650504, China.
The design and fabrication of nanocatalysts with high accessibility and sintering resistance remain significant challenges in heterogeneous electrocatalysis. Herein, a novel catalyst is introduced that combines electronic pumping with alloy crystal facet engineering. At the nanoscale, the electronic pump leverages the chemical potential difference to drive electron migration from one region to another, separating and transferring electron-hole pairs.
View Article and Find Full Text PDFHybrid Materials Based on Carbon Nanotubes and Tetra- and Octa-Halogen-Substituted Zinc Phthalocyanines: Sensor Response Toward Ammonia from the Quantum-Chemical Point of View.
Sensors (Basel)
December 2024
Nikolaev Institute of Inorganic Chemistry SB RAS, 3 Lavrentiev Pr., 630090 Novosibirsk, Russia.
This paper presents the results of quantum-chemical modeling performed by the Density Functional-Based Tight Binding (DFTB) method to investigate the change in the band structure of hybrid materials based on carbon nanotubes and unsubstituted, tetra-, or octa-halogen-substituted zinc phthalocyanines upon the adsorption of ammonia molecules. The study showed that the electrical conductivity of these materials and its changes in the case of interaction with ammonia molecules depend on the position of the impurity band formed by the orbitals of macrocycle atoms relative to the forbidden energy gap of the hybrids. The sensor response of the hybrids containing halogenated phthalocyanines was lower by one or two orders of magnitude, depending on the number of substituents, compared to the hybrid with unsubstituted zinc phthalocyanine.
View Article and Find Full Text PDFPreparation of Molecularly Imprinted Electrochemical Sensors and Analysis of the Doping of Epinephrine in Equine Blood.
Sensors (Basel)
December 2024
Shandong Provincial Key Laboratory of Monocrystalline Silicon Semiconductor Materials and Technology, Shandong Provincial Engineering Research Center of Organic Functional Materials and Green Low-Carbon Technology, Shandong Universities Engineering Research Center of Integrated Circuits Functional Materials and Expanded Applications, College of Chemistry and Chemical Engineering, Dezhou University, Dezhou 253023, China.
In this paper, a novel molecularly imprinted polymer membrane modified glassy carbon electrode for electrochemical sensors (MIP-OH-MWCNTs-GCE) for epinephrine (EP) was successfully prepared by a gel-sol method using an optimized functional monomer oligosilsesquioxane-AlO sol-ITO composite sol (ITO-POSS-AlO). Hydroxylated multi-walled carbon nanotubes (OH-MWCNTs) were introduced during the modification of the electrodes, and the electrochemical behavior of EP on the molecularly imprinted electrochemical sensors was probed by the differential pulse velocity (DPV) method. The experimental conditions were optimized.
View Article and Find Full Text PDFDevelopment of a Novel Electrochemical Immunosensor for Rapid and Sensitive Detection of Sesame Allergens Ses i 4 and Ses i 5.
Foods
January 2025
School of Food and Biological Engineering, Engineering Research Center of Bio-Process of Ministry of Education, Anhui Province Laboratory of Agricultural Products Modern Processing, Hefei University of Technology, Hefei 230009, China.
Due to their lipophilicity and low content, the major sesame oleosin allergens, Ses i 4 and Ses i 5, are challenging to identify using conventional techniques. Then, a novel unlabeled electrochemical immunosensor was developed to detect the potential allergic activity of sesame oleosins. The voltammetric immunosensor was constructed using a composite of gold nanoparticles (AuNPs), polyethyleneimine (PEI), and multi-walled carbon nanotubes (MWCNTs), which was synthesized in a one-pot process and modified onto a glass carbon electrode to enhance the catalytic current of the oxygen reduction reaction.
View Article and Find Full Text PDFStudy of Corrosion of Portland Cement Embedded Steel with Addition of Multi-Wall Carbon Nanotubes.
Materials (Basel)
January 2025
Laboratorio de Física del Plasma, Universidad Nacional de Colombia Sede Manizales, Campus la Nubia, Km 9 via al Magdalena, Manizales 170007, Colombia.
In this study, we research the innovative application of multi-walled carbon nanotubes (MWCNTs) as corrosion inhibitors in Portland cement embedded steel. The physicochemical properties of the dispersion solutions were evaluated, varying the storage time, to analyze their effect on corrosion resistance. Using a dispersion energy of 440 J/g and a constant molarity of 10 mM, stable dispersions were achieved for up to 3 weeks.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!