Experimental Investigation on Laser-Induced Electrochemical Silver Plating Technology.

The silver coating is widely used in electronic device manufacturing due to its excellent conductivity and soldering properties. Conventional preparation of local silver coating often uses the preplated silver, mask high-speed silver plating, and deplated silver processes. In this paper, the laser-induced electrodeposition technique is used to perform maskless laser-induced localized electrodeposition on a copper substrate preplated with a layer of silver. After the deplated silver process, ultrathin silver coatings with high dimensional accuracy, good corrosion resistance, and good bonding were obtained. The spatial distribution of the transient temperature field under laser irradiation is studied, the variation pattern of cathode substrate current under laser irradiation is tested, and finally, the spatial distribution of the pressure field under laser irradiation is simulated by Comsol. The effect of different laser scanning methods on the coating morphology was investigated, and the experimental study of the different single pulse energy-induced localized silver coatings was systematically carried out. The results show that the localized coating obtained by cross-line scanning with a laser single pulse energy of 93 μJ is flat with a film thickness of 0.23 μm, high dimensional accuracy, and good bonding force and corrosion resistance properties. This method provides a new approach for the preparation of a localized silver coating.