To enhance the utilization of solid waste in cement kiln co-processing, this study analyzed the multifaceted synergy of pyrolysis and mineralization processes of iron-rich sludge (SS) and waste incineration fly ash (FA) at optimal blending ratios. Based on the physicochemical properties of SS and co-pyrolysis experiments, it was found that Fe acted as a positive catalyst in pyrolysis between 700 and 1000 °C, while the endogenous polymerization effect of Fe(III) mineral groups dominated above 800 °C. Additionally, the study investigated the solidification and migration of heavy metals and the transformation of harmful elements (S, Cl, and P). Results indicated that the best mixture ratios for SS and FA were 6:4 and 9:1, respectively, and synergistic pyrolysis and mineral co-curing effects were observed in the pyrolysis temperature range of 50-1000 °C. The synergy between SS and FA allowed for the decomposition and solidification of harmful organic components and heavy metals, reducing environmental risks. Furthermore, in actual production, by mixing 100 tons of SS and FA with Portland cement with a daily output of 2500 tons, the compressive strength during early hydration stages can reach 34.52 MPa on the third day, exceeding the highest performance of Portland cement (62.5R) strength index specified in the standard.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10536882 | PMC |
http://dx.doi.org/10.1021/acsomega.3c03586 | DOI Listing |
Waste Manag
June 2024
Shanghai Key Lab for Urban Ecological Processes and Eco-Restoration, School of Ecological and Environmental Sciences, East China Normal University, Shanghai 200241, China; Shanghai Institute of Pollution Control and Ecological Security, 1515 North Zhongshan Rd. (No. 2), Shanghai 200092, China; Shanghai Engineering Research Center of Biotransformation of Organic Solid Waste, Shanghai 200241, China; Technology Innovation Center for Land Spatial Eco-restoration in Metropolitan Area, Ministry of Natural Resources, 3663 N. Zhongshan Road, Shanghai, 200062, China. Electronic address:
Chemosphere
June 2024
Montana Technological University, 1300 W. Park Street, Butte, MT, 59701, USA. Electronic address:
Recent research has found biochar to be a cost-effective adsorbent for removal of perfluoroalkyl substances in water. To promote cleaner production and sustainable waste management, this study explored the potential to produce activated biochars by co-pyrolyzing sawdust with iron-rich biosolids and polyaluminum sludge. The maximum capacity to adsorb perfluorooctanesulfonic acid (PFOS) reached 27.
View Article and Find Full Text PDFWater Res
June 2024
State Key Laboratory of Water Environment Simulation, School of Environment, Beijing Normal University, Beijing 100875, China; The Key Laboratory of Water and Sediment Sciences, Ministry of Education, School of Environment, Beijing Normal University, Beijing 100875, China. Electronic address:
The autotrophic denitrification of coupled sulfur and natural iron ore can remove nitrogen and phosphorus from wastewater with low C/N ratios. However, the low solubility of crystalline Fe limits its bioavailability and P absorption capacity. This study investigated the effects of amorphous Fe in drinking water treatment residue (DWTR) and crystalline Fe in red mud (RM) on nitrogen and phosphorus removal during sulfur autotrophic processes.
View Article and Find Full Text PDFSci Total Environ
April 2024
Department of Chemistry, University of Huelva, Campus El Carmen, s/n, 21071 Huelva, Spain. Electronic address:
This paper explores the potential of Technosols made from non-hazardous industrial wastes as a sustainable solution for highly acidic iron-rich soils at the Rio Tinto mining site (Spain), a terrestrial Mars analog. These mine soils exhibit extreme acidity (pH = 2.1-3.
View Article and Find Full Text PDFWaste Manag
April 2024
Umeå University, Department of Applied Physics and Electronics, Thermochemical Energy Conversion Laboratory, SE 901 87 Umeå, Sweden.
The purpose of this study was to provide detailed knowledge of the morphological properties of ash particles, including the volumetric fractions and 3D distributions of phosphates that lay within them. The ash particles came from digested sewage sludge co-combusted with K- and Si-rich wheat straw or K-rich sunflower husks. X-ray micro-tomography were combined with elemental composition and crystalline phase information to analyse the ash particles in 3D.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!