Seasonal variations in dissolved organic matter concentration and composition in an outdoor system for bank filtration simulation.

J Environ Sci (China)

German Environment Agency, Section II 3.3, Schichauweg 58, 12307, Berlin, Germany; Technische Universität Berlin, Water Treatment, KF4, Str. des 17. Juni 135, 10623, Berlin, Germany.

Published: January 2024

Dissolved organic matter (DOM) in surface waters can vary markedly in character depending on seasonal variations such as rainfall intensity, UV radiations and temperature. Changes in DOM as well as temperature and rainfall intensity over the year can affect the biochemical processes occurring in bank filtration (BF). Identification and characterization of DOM in the surface water could help to optimize the water treatment and provide stable and safe drinking water. This study investigated year-long variations of DOM concentrations and compositions in a surface water of a circulated outdoor pond (research facility) connected to a BF passage. DOM was dominated by humic substances and a changing pattern of DOM in surface water was observed throughout the year. A significant increase of DOM (∼ 38%) in surface water was noted in August compared to November. The fluorescent DOM showed that DOM in summer was enriched with the degradable fraction whilst non-degradable fraction was dominated in winter. A constant (1.7 ± 0.1 mg/L) effluent DOM was recirculated in the system throughout the year. DOM removal through BF varied between 4% to 39% and was achieved within a few meters after infiltration and significantly correlated with influent DOM concentration (R = 0.82, p < 0.05). However, no significant (p > 0.05) change in the removal of DOM was observed in two subsurface layers (upper and lower). This study highlights the presence of a constant non-degradable DOM in the bank filtrate, which was not affected by temperature, redox conditions and UV radiations.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.jes.2023.01.006DOI Listing

Publication Analysis

Top Keywords

surface water
16
dom
14
dom surface
12
seasonal variations
8
dissolved organic
8
organic matter
8
bank filtration
8
rainfall intensity
8
water
6
surface
5

Similar Publications

Electrochemical water splitting is a promising method for the generation of "green hydrogen", a renewable and sustainable energy source. However, the complex, multistep synthesis processes, often involving hazardous or expensive chemicals, limit its broader adoption. Herein, a nitrate (NO) anion-intercalated nickel-iron-cerium mixed-metal (oxy)hydroxide heterostructure electrocatalyst is fabricated on nickel foam (NiFeCeOH@NF) via a simple electrodeposition method followed by cyclic voltammetry activation to enhance its surface properties.

View Article and Find Full Text PDF

Self-cleaning applications based on bionic surface designs requires an in-depth understanding of unique and complex wetting and evaporation processes of sessile droplets on natural biosurfaces. To this end, hydrophobic bamboo and Kalanchoe blossfeldiana leaves are excellent candidates for self-cleaning applications, but various properties, such as the heat and mass transfer processes during evaporation, remain unknown. Here, the dynamics of contact angle, radius, and heat and mass transfer during evaporation of sessile droplets on bamboo and Kalanchoe blossfeldiana leaves with roughness in the range 2.

View Article and Find Full Text PDF

Porous polymers: structure, fabrication and application.

Mater Horiz

January 2025

Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei, Anhui, 230027, China.

The porous polymer is a common and fascinating category within the vast family of porous materials. It offers valuable features such as sufficient raw materials, easy processability, controllable pore structures, and adjustable surface functionality by combining the inherent properties of both porous structures and polymers. These characteristics make it an effective choice for designing functional and advanced materials.

View Article and Find Full Text PDF

Surface State Control of Apatite Nanoparticles by pH Adjusters for Highly Biocompatible Coatings.

ACS Appl Mater Interfaces

January 2025

Department of Materials Science and Technology, Nagaoka University of Technology, 1603-1 Kamitomioka, Nagaoka, Niigata 940-2188, Japan.

Apatite nanoparticles are biocompatible nanomaterials, so their film formation on biodevices is expected to provide effective bonding with living organisms. However, the biodevice-apatite interfaces have not yet been elucidated because there is little experimental evaluation and discussion on the nanoscale interactions, as well as the apatite surface reactivities. Our group has demonstrated the biomolecular adsorption properties on a quartz crystal microbalance with dissipation (QCM-D) sensor coated with apatite nanoparticles, demonstrating the applicability of apatite nanoparticle films on devices.

View Article and Find Full Text PDF

Peptidomics & Molecular Simulation-Based Specific Screening of Antifreeze Peptides from Scale and the Action Mechanism.

J Agric Food Chem

January 2025

College of Chemical Engineering, College of Biological Science and Engineering, Fuzhou University, Fuzhou 350108, P.R.China.

This study aims to explore the cryoprotective mechanisms of food-derived hydrolyzed peptides and develop novel cryoprotectants to enhance the quality of frozen foods. scale antifreeze peptides (Ej-AFP) were prepared using enzymatic hydrolysis, which had a 4-fold increase in protection efficiency for surimi compared to traditional cryoprotectants. Furthermore, Ej-AFP was able to control 63.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!