The modelling of chloride transport in concrete under an electrical field requires taking into account the electrode processes. These processes are very rarely introduced into the literature, despite their impact on chloride migration and the electroneutrality of the pore solution of the material. This paper aims to propose a multi-ion model for chloride migration that takes into consideration the electrode processes. The model is applied to simulate the standard chloride migration test. The generation of OH in the cathode and H in the anode allows for the monitoring of the electroneutrality. The model considers all of the ions in the pore solution. Ion fluxes are calculated using the Nernst-Planck equation. The Langmuir model is used to simulate the chloride isotherms. The thermodynamic equilibrium in the material is considered, which reflects the ion-solid interactions during the migration. Measurements of water porosity and the chemical composition of the pore solution are essential to provide input data and the initial and boundary conditions. The numerical results of the ion profiles in the material studied confirm the electroneutrality at any point within the material, in contrast with models that do not take the electrode processes into account. The proposed model allows for the more accurate simulation of the chloride migration test and electrochemical chloride extraction in reinforced concrete structures subjected to NaCl as part of maintenance and repair strategies.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10532969 | PMC |
| http://dx.doi.org/10.3390/ma16186200 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Recent Progress and Advances of Perovskite Crystallization in Carbon-Based Printable Mesoscopic Solar Cells.
Adv Mater
January 2025
Michael Grätzel Center for Mesoscopic Solar Cells Wuhan National Laboratory for Optoelectronics Key Laboratory of Materials Chemistry for Energy Conversion and Storage of Ministry of Education, Huazhong University of Science and Technology, Wuhan, Hubei, 430074, P. R. China.
Carbon-based printable mesoscopic solar cells (p-MPSCs) offer significant advantages for industrialization due to their simple fabrication process, low cost, and scalability. Recently, the certified power conversion efficiency of p-MPSCs has exceeded 22%, drawing considerable attention from the community. However, the key challenge in improving device performance is achieving uniform and high-quality perovskite crystallization within the mesoporous structure.
View Article and Find Full Text PDFIntramolecular DNA Wheel Construction for Highly Sensitive Electrochemical Detection of miRNA.
Nano Lett
January 2025
Suzhou Institute of Biomedical Engineering and Technology, Chinese Academy of Sciences, Suzhou 215163, China.
Accurate and reliable quantification of disease-related biomolecules is essential for clinical diagnosis. In this study, a novel electrochemical approach is developed based on a target triggered DNA nanostructural switch from a hairpin dimer to a double-stranded wheel. During the process, electrochemical species get closer to the electrode interface, and the multiple intramolecular strand displacements are beneficial to low abundant target analysis.
View Article and Find Full Text PDFMicrochannel fabrication on bio-grade Nitinol SMA by μ-ED milling process using sustainable oil for improving the machining performance and biocompatibility.
Biofabrication
January 2025
Mechanical Engineering, National Institute of Technology Meghalaya, Shillong, Shillong, Meghalaya, 793003, INDIA.
The process of micromachining has garnered attention for its ability to create three-dimensional tiny features, particularly in ultra-hard and exotic materials. The present work investigates the effect of different parameters of the µ-ED milling, such as pulse on time (Ton), pulse off time (Toff), voltage (V), and tool rotation (TR) on the dimensional deviation (DD), material removal rate (MRR), surface roughness (Ra), and machined surface characteristics (analysed by EDS and FESEM). The sesame oil as dielectric and tungsten-copper as tool electrodes were used to maintain the accuracy and improve the machinability of bio-grade Nitinol SMA.
View Article and Find Full Text PDFStructural Transformation and Degradation of Cu Oxide Nanocatalysts during Electrochemical CO Reduction.
J Am Chem Soc
January 2025
Liquid Sunlight Alliance, Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, California 94720, United States.
The electrochemical CO reduction reaction (CORR) holds enormous potential as a carbon-neutral route to the sustainable production of fuels and platform chemicals. The durability for long-term operation is currently inadequate for commercialization, however, and the underlying deactivation process remains elusive. A fundamental understanding of the degradation mechanism of electrocatalysts, which can dictate the overall device performance, is needed.
View Article and Find Full Text PDFTuning the spin state of the iron center by FePc/Mg(OH) heterojunction boosting oxygen reduction performance.
J Colloid Interface Sci
January 2025
National-Local Joint Engineering Laboratory for Energy Conservation in Chemical Process Integration and Resources Utilization, School of Chemical Engineering and Technology, Hebei University of Technology, Tianjin 300130 PR China. Electronic address:
Iron phthalocyanine (FePc) is a promising non-noble metal catalyst for oxygen reduction reaction (ORR). While, with the plane-symmetric FeN site, the ORR activity of FePc is generally low due to its low ability to adsorb and activate O. Herein, we anchor FePc on Mg(OH)/N-doped carbon nanosheets building the ternary plate-like catalyst FePc/Mg(OH)/NC.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!