Microporous sodium titanosilicate, NaTiSiO, has been successfully prepared using the sol-gel method. The structural and morphological characterization of synthesized product has been made via thermal analyses (TG-DTG), X-ray diffraction (XRD), and electron microscopy (SEM and TEM). Adsorption properties of the synthesized NaTiSiO nanopowder for Pb(II) removal of aqueous media was investigated in different experimental conditions such as the contact time, the initial metal concentration, the pH, and the temperature. The Pb(II) adsorption on NaTiSiO was discussed according to the kinetics and thermodynamics models. The adsorption kinetics of Pb(II) have been better described by the PS-order kinetic model which has the highest fitting correlation coefficients (R: 0.996-0.999) out of all the other models. The adsorption results have been successfully fitted with the Langmuir and Redlich-Paterson models (R: 0.9936-0.9996). The calculated thermodynamic parameters indicate that the Pb(II) adsorption is an endothermic process, with increased entropy, having a spontaneous reaction. The results have revealed a maximum adsorption capacity of 155.71 mg/g at 298 K and a very high adsorption rate at the beginning, more than 85% of the total amount of Pb(II) being removed within the first 120 min, depending on the initial concentration.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10530816 | PMC |
| http://dx.doi.org/10.3390/ijms241813789 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Characterization and Adsorption Behavior of Newly Synthesized Aminated Cellulose with Jeffamine EDR148 Towards Ni(II), Cu(II), and Pb(II) Heavy Metal Ions.
Polymers (Basel)
January 2025
Department of Chemistry, College of Science, King Faisal University, P.O. Box 400, Al-Ahsa 31982, Saudi Arabia.
Industrial wastewater containing heavy metal ions presents serious economic risk to the environment. In this study, a novel compound of aminated cellulose with jeffamine EDR148 was prepared to improve cellulose's adsorptive behavior towards metal ions. This study undertook a straightforward and efficient cellulose modification through homogeneous chlorination in N,N'-butylmethylimidazolium chloride to produce 6-deoxychlorocellulose (Cell-Cl), followed by a reaction with jeffamine EDR148 and ultimately resulting in the formation of aminated cellulose (Cell-Jef148).
View Article and Find Full Text PDFNano-Fibrillated Bacterial Cellulose Nanofiber Surface Modification with EDTA for the Effective Removal of Heavy Metal Ions in Aqueous Solutions.
Materials (Basel)
January 2025
Division of Applied Chemistry and Biochemistry, National Institute of Technology, Tomakomai College, Nishikioka 443, Tomakomai 059-1275, Hokkaido, Japan.
Nano-fibrillated bacterial cellulose (NFBC) has very long fibers (>17 μm) with diameters of approximately 20 nm. Hence, they have a very high aspect ratio and surface area. The high specific surface area of NFBC can potentially be utilized as an adsorbent.
View Article and Find Full Text PDFHigh-Performance TiCT-MXene/Mycelium Hybrid Membrane for Efficient Lead Remediation: Design and Mechanistic Insights.
ACS Appl Mater Interfaces
January 2025
Department of Materials Design and Innovation, University at Buffalo, Buffalo, New York 14260-1660, United States.
This study presents a hybrid microfiltration technology designed for high-performance lead (Pb(II)) remediation, especially from aqueous solutions with high Pb(II) concentrations, by utilizing two-dimensional (2D) TiCT-MXene layers deposited on dry mycelium membranes. The hybrid TiCT-MXene/mycelium (MyMX) membranes were fabricated via a single-step electrochemical deposition (ECD) technique, which enabled a uniform coating of 2D TiCT-MXene onto individual hyphal fibers of a prefabricated mycelium membrane. Optimized ECD parameters for high Pb(II) uptake were identified using scanning electron microscopy and energy-dispersive X-ray spectroscopy.
View Article and Find Full Text PDFApplication of supervised learning models for enhanced lead (II) removal from wastewater via modified cellulose nanocrystals (CNCs).
J Environ Sci Health A Tox Hazard Subst Environ Eng
January 2025
Department of Environmental Science, College of Agriculture and Environmental Sciences, University of South Africa, Florida, South Africa.
Heavy metal ions are acknowledged to impact the environment and human health adversely. CNCs are effective materials for removing heavy metal ions in industrial applications and process innovations since they can be used in static and dynamic adsorption processes. Cost-effective, uncomplicated water treatment technologies must be developed using biodegradable polymers, namely, modified cellulose nanocrystals.
View Article and Find Full Text PDFLight-driven in-situ synthesis of nano-sulfur and graphene oxide composites for efficient removal of heavy metal ions.
J Hazard Mater
January 2025
State Key Lab of Geohazard prevention & Geoenvironment protection, College of Materials and Chemistry & Chemical Engineering, Chengdu University of Technology, Chengdu 610059, China. Electronic address:
Sulfur nanoparticles (SNPs) and their composites are promising for heavy metal adsorption, yet current SNPs often lack surface S, leading to low affinity toward heavy metal and ease of aggregation. Here, we report a simple light-driven method for facile prepare SNPs with surfaces enriched with S and in-situ load them onto graphene oxide (GO) to fabricate GO-S composites. Under illumination, the O generated by photosensitizer phloxine B was able to oxidize S into elemental SNPs.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!