Purpose: To compare the translucency parameters and masking abilities of different monolithic CAD/CAM ceramics placed on different-colored substructures.
Materials And Methods: Square-shaped specimens (12 × 12 × 1.5 mm) were prepared from feldspathic (C), leucite (EMP), lithium disilicate (e.max), zirconiareinforced lithium silicate (VS), resin nanoceramic (LU), polymer-infiltrated ceramic (VE), hybrid nanoceramic (GC), monolithic zirconia (TZI), and composite resin (TC) blocks (n = 10 per material). After mechanical polishing, the translucency parameter (TP) was calculated. Then, each ceramic specimen was measured on eight substructures, and the color difference between ND2 and each substrate was calculated with the CIEDE2000 formula. TP values were analyzed with one-way ANOVA and Games-Howell tests, and the color differences indicating masking ability were analyzed with two-way ANOVA and Tukey HSD tests.
Results: The highest TP was observed in TC, followed by LU, EMP, C,GC, e.max, VS, VE, and TZI. The ΔE00 color difference values of TZI, VS, and VE on all abutment colors, except for ND9, were below the acceptable threshold value.
Conclusions: All monolithic ceramic materials used in the study masked the ND1 and ND3 substrates. The ND9, representing severely discolored or devitalized preparations, could not be masked by any monolithic CAD/CAM ceramics used in the study.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.11607/ijp.8597 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Comparative analysis of the fit quality of monolithic zirconia veneers produced through traditional and digital workflows using silicone replica technique: an in vitro study.
BMC Oral Health
December 2024
Faculty of Odonto-Stomatology, University of Health Sciences, Vietnam National University Ho Chi Minh City, Ho Chi Minh City, Vietnam.
Background: The success of a restoration largely depends on the quality of its fit. This study aimed to investigate the fit quality of monolithic zirconia veneers (MZVs) produced through traditional and digital workflows.
Methods: A typodont maxillary right central incisor was prepared.
Construction of reusable fluorescent assembled 3D-printed hydrogen-based models to simulate minimally invasive resection of complex liver cancer.
PLoS One
December 2024
Department of General Surgery, Cancer center, Division of Hepatobiliary and Pancreatic Surgery, Zhejiang Provincial People's Hospital, Affiliated People's Hospital, Hangzhou Medical College, Hangzhou, Zhejiang Province, China.
Complex liver cancer is often difficult to expose or dissect, and the surgery is often challenging. 3D-printed models may realistically present 3D anatomical structure, which has certain value in planning and training of liver surgery. However, the existing 3D-printed models are all monolithic models, which are difficult to reuse and limited in clinical application.
View Article and Find Full Text PDFTwo-Year Clinical Evaluation of Enamel Wear Antagonistic to Polished and Glazed Monolithic Zirconia Endocrowns.
J Esthet Restor Dent
December 2024
Department of Fixed Prosthodontics, Faculty of Dentistry, Mansoura University, Mansoura, Egypt.
Objective: To assess the effect of chairside adjustment and polishing on the clinical performance of zirconia endocrowns and digitally calculate the opposing enamel wear.
Materials And Methods: A total of 20 participants received zirconia endocrowns on their endodontically treated lower first molars. All endocrowns were fabricated using CAD/CAM technology.
Esthetic and Functional Rehabilitation: Retreatment of Anterior Fixed Dental Prothesis With Biologically Oriented Preparation Technique and Digital Workflow.
J Esthet Restor Dent
December 2024
Analysis of Techniques, Material and Instruments Applied to Digital Dentistry and CAD/CAM Procedures Research Group, University Complutense of Madrid, Madrid, Spain.
Objective: This clinical case describes a multidisciplinary retreatment of a patient with anterior fixed dental prostheses (FDPs) using minimally invasive restorations and a biologically oriented preparation technique (BOPT).
Clinical Considerations: A 56-year-old female patient, treated 30 years ago with a metal-ceramic FDP due to dental agenesis, presented a misfit prosthesis at the gingival margin, black spaces, and food retention at the pontics. Notably, tooth number 2.
Bonding super translucent multilayered monolithic zirconia to different foundation materials: an invitro study.
BMC Oral Health
December 2024
Department of Fixed Prosthodontics, Faculty of Dentistry, Mansoura University, Mansoura, Dakahlia Governorate, Egypt.
Background: The objective of this study was to investigate the effect of bonded substrate, zirconia surface conditioning and the interaction between them on the shear bond strength of monolithic zirconia.
Methods: Forty-eight monolithic zirconia discs were CAD-CAM fabricated and divided into two groups according to surface treatment either as milled and universal primer application (Monobond N, Ivoclar-Vivadent) (P) or sandblasting then universal primer application (Monobond N) (SP). Each main group was further divided into three test groups according to the bonded substrate: dentin (DSP, DP), composite (CSP, CP) or resin modified glass ionomer (RMGI) (GSP, GP).
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!