Exciton harvesting is of paramount importance for quantum-dot light-emitting diodes (QLEDs). Direct exciton harvesting by the quantum dots (QDs) emitting layer suffers from poor hole injection due to the low conduction bands and valence bands of QDs, leading to unbalanced electron-hole injection and recombination. To address this issue, here, an exciton sensitizing approach is reported, where excitons form on a phosphorescent-dye-doped layer, which then transfer their energies to adjacent QDs layer for photon emission. Due to the very efficient exciton formation and energy-transfer processes, higher device performance can be achieved. To demonstrate the above strategy, red QLEDs with a phosphorescent dye, iridium (III) bis(2-methyldibenzo-[f,h]quinoxaline) (acetylacetonate), Ir(MDQ) (acac), doped hole-transporting layer are fabricated and studied. At a doping concentration of 10 wt%, the best device achieves record high current efficiency, power efficiency, and external quantum efficiency (EQE) of 37.3 cd A , 41 lm W , and 37%, respectively. Simultaneously, the efficiency roll-off characteristic is greatly improved, in that 35% EQE can be well retained at a high luminance level of 450 000 cd m . Moreover, the devices also exhibit good stability and reproducibility.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1002/adma.202306703 | DOI Listing |
Polymers (Basel)
December 2024
Military Institute of Engineering-IME, Department of Materials Science, Praça General Tibúrcio, 80, Urca, Rio de Janeiro 22290-270, RJ, Brazil.
Conjugated donor-acceptor (D-A) copolymers are widely used in optoelectronic devices due to their influence on the resulting properties. This study focuses on the synthesis and characterization of the conjugated D-A copolymer constructed with fluorene and di-2-thienyl-2,1,3-benzothiadiazole units, resulting in Poly[2,7-(9,9-dioctyl-fluorene)-alt-5,5-(4,7-di(2-thienyl)-2,1,3-benzothiadiazole)] (PFDTBT). The synthesis associated with reaction times of 48 and 24 h, the latter incorporating the phase-transfer catalyst Aliquat 336, was investigated.
View Article and Find Full Text PDFACS Nano
January 2025
MIIT Key Laboratory of Advanced Display Materials and Devices, Jiangsu Province Engineering Research Center of Quantum Dot Display, School of Materials Science and Engineering, Institute of Optoelectronics & Nanomaterials, Nanjing University of Science and Technology, Nanjing, Jiangsu 210094, China.
Room temperature (RT) synthesized mixed bromine and chlorine CsPbBrCl perovskite quantum dots (Pe-QDs) offer notable advantages for blue quantum dot light-emitting diodes (QLEDs), such as cost-effective processing and narrow luminescence peaks. However, the efficiency of blue QLEDs using these RT-synthesized QDs has been limited by inferior crystallinity and deep defect presence. In this study, we demonstrate a precise approach to constructing high-quality gradient core-shell (CS) structures of CsPbBrCl QD through anion exchange.
View Article and Find Full Text PDFACS Appl Mater Interfaces
January 2025
School of Materials Science and Engineering, Kyungpook National University, Daegu 41566, Republic of Korea.
The development of quantum dot light-emitting diodes (QLEDs) represents a promising advancement in next-generation display technology. However, there are challenges, especially in achieving efficient hole injection, maintaining charge balance, and replacing low-stability organic materials such as PEDOT:PSS. To address these issues, in this study, self-assembled monolayers (SAMs) were employed to modify the surface properties of NiO, a hole injection material, within the structure of ITO/HIL/TFB/QDs/ZnMgO/Al QLEDs.
View Article and Find Full Text PDFACS Appl Mater Interfaces
January 2025
Department of Physics, School of Physics and Information Engineering, Fuzhou University, Fuzhou 350108, P. R. China.
Perovskite quantum dots (PQDs) have attracted more and more attention in light-emitting diode (LED) devices due to their outstanding photoelectric properties. Surface ligands not only enable size control of quantum dots but also enhance their optoelectronic performance. However, the efficiency of exciton recombination in PQDs is often hindered by the desorption dynamics of surface ligands, leading to suboptimal electrical performance.
View Article and Find Full Text PDFMicromachines (Basel)
December 2024
Department of Semiconductor Engineering, Gachon University, 1342 Seongnam-Daero, Soojung-gu, Seongnam 13120, Republic of Korea.
White organic light-emitting diodes (OLEDs) represent a significant technology in the display industry for the achievement of full color. However, sophisticated technologies are required for white light emission. In this paper, we developed a simple white light-emitting display device using a quantum-dot (QD) film and a greenish-blue OLED.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!