The evolution of shear key design for bridges is accompanied by research on structural earthquake resistance. However, the vast majority of pounding forces, responses, and corresponding data for the study and design of shear keys have been based on expensive experimentalism and imprecise empiricism approaches for decades. Hence, strengthening theoretical study on seismic performance of shear key is essential. In this paper, a "Beam-Spring-Beam + Concentrated Mass" continuum dynamic model is proposed. Meanwhile, the transient wave function expansion method and the mode superposition method are applied to determine the analytical expression of the dynamic response from the girder and pier system (pier and cap beam). Furthermore, the combined transient internal force method and Duhamel integration method are introduced to assess the elastic pounding process. Through programming and numerical analysis, a series of pounding response data related to the shear key under various working circumstances will be explored. As mentioned above, the proposed theoretical method can optimize shear key design and boost the reliability of seismic limiting devices in the future. •Establishing a feasible "Beam-Spring-Beam + Concentrated Mass" continuum model of girders and piers based on a two-span continuous girder bridge.•Deriving the analytical solutions of responses by conducting the response equations under horizontal seismic excitation (containing orthonormality verification).•Simulating the pounding process by embedding elastic pounding calculation methods into Continuum Model.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10502410 | PMC |
| http://dx.doi.org/10.1016/j.mex.2023.102370 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Chemical reactions with the Casson nanofluid flow by the bioconvective behavior of microorganisms over a spinning disc.
Heliyon
January 2025
Institute of Mathematics, Henan Academy of Sciences, Zhengzhou, 450046, China.
This study examines the behavior of the Casson nanofluid bioconvection flow around a spinning disc under various influences, including gyrotactic microorganisms, multiple slips, and thermal radiation. Notably, it accounts for the reversible nature of the flow and incorporates the esterification process. The aim of this study is to investigate the influence of reversible chemical reactions on the flow behavior of a Casson nanofluid in the presence of bioconvective microorganisms over a spinning disc.
View Article and Find Full Text PDFTemperature dynamics and mechanical properties analysis of carbon fiber epoxy composites radiated by nuclear explosion simulated light source.
Sci Rep
January 2025
Engineering Research Center of Flexible Radiation Protection Technology, Universities of Shaanxi Province, Xi'an Polytechnic University, Xi'an, 710048, Shaanxi, China.
The impact of light radiation, a predominant energy release mechanism in nuclear explosions, on material properties is of critical importance. This investigation employed an artificial light source to replicate the effects of nuclear explosion radiation and utilized a physical information neural network (PINN) to examine the temperature evolution and corresponding changes in the mechanical properties of carbon fiber/epoxy composites (CFEC). A light source simulating nuclear explosion's light radiation was built to irradiate the CFEC, then measure the reflection spectrum and temperature of samples.
View Article and Find Full Text PDFInvestigating slope stability of multiple stopes prone to instability in the Ziluoyi iron ore mining site.
Sci Rep
January 2025
School of Safety Engineering, China University of Mining and Technology, Xuzhou, 221116, China.
The ore mining sites commonly experience slope instability, which is causing concern for the workers' safety and the operation's stability. Considering the Ziluoyi iron ore mining site as a case study, uniaxial compression strength and shear tests are performed on the lower disk peripheral rock, ore body, and upper disk peripheral rock, leading to the extraction of compressive strength and elastic modulus (lower disk: 77.7 MPa-9.
View Article and Find Full Text PDFNumerical analysis of the hydraulic fracture propagation behavior encountering gravel in conglomerate reservoirs.
Sci Rep
January 2025
State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu, 610500, China.
Hydraulic fracturing, which forms complex fracture networks, is a common technique for efficiently exploiting low-permeability conglomerate reservoirs. However, the presence of gravel makes conglomerate highly heterogeneous, endowing the deformation, failure, and internal micro-scale fracture expansion mechanisms with uniqueness. The mechanism of fracture expansion when encountering gravel in conglomerate reservoirs remains unclear, challenging the design and effective implementation of hydraulic fracturing.
View Article and Find Full Text PDFNumerical simulation of fluid-structure interaction analysis for the performance of leaflet reimplantation with different types of artificial graft.
Comput Methods Programs Biomed
January 2025
College of Chemistry and Life Science, Beijing University of Technology, Beijing 100124, China; Beijing International Science and Technology Cooperation Base for Intelligent Physiological Measurement and Clinical Transformation, Beijing 100124, China. Electronic address:
Background And Objective: In clinical practice, valve-sparing aortic root replacement surgery primarily addresses left ventricular dysfunction in patients due to severe aortic regurgitation, but there is controversy regarding the choice of surgical technique. In order to investigate which type of valve-sparing aortic root replacement surgeries can achieve better blood flow conditions, this study examines the impact of changes in the geometric morphology of the aortic root on the hemodynamic environment through numerical simulation.
Methods: An idealized model of the aortic root was established based on data obtained from clinical measurements, including using the model of the aortic root without significant lesions as the control group (Model C), while using surgical models of leaflet reimplantation with tubular graft (Model T), leaflet reimplantation with Valsalva graft (Model V), and the Florida sleeve procedure (Model F) as the experimental groups.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!