Coupled electron/ion transport is a decisive feature of Li plating/stripping, wherein the compatibility of electron/ion transport rates determines the morphology of deposited Li. Local Li hotspots form due to inhomogeneous interfacial charge transfer and lead to uncontrolled Li deposition, which decreases the Li utilization rate and safety of Li metal anodes. Herein, we report a method to obtain dendrite-free Li metal anodes by driving electron pumping and accumulating and boosting Li ion diffusion by tuning the work function of a carbon host using cobalt-containing catalysts. The results reveal that increasing the work function provides an electron deviation from C to Co, and electron-rich Co shows favorable binding to Li . The Co catalysts boost Li diffusion on the carbon fiber scaffolds without local aggregation by reducing the Li migration barrier. The as-obtained dendrite-free Li metal anode exhibits a Coulombic efficiency of 99.0 %, a cycle life of over 2000 h, a Li utilization rate of 50 %, and a capacity retention of 83.4 % after 130 cycles in pouch cells at a negative/positive capacity ratio of 2.5. These findings provide a novel strategy to stabilize Li metal by regulating the work function of materials using electrocatalysts.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1002/anie.202310132 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
A Spontaneous Complexation-Exfoliation Strategy for a Flexible Anode Towards Superior Durable and Ultrafast Lithium-Ion Batteries.
Molecules
December 2024
College of Mechanical and Electronic Engineering, Tarim University, Alar 843300, China.
Article Synopsis
- Transition metal oxides, like MnO, show great promise as anodes for flexible electrodes but face challenges such as low conductivity and poor cycling performance.
- A new method called "spontaneous complexation and exfoliation" creates flexible thin-film electrodes using MnO nanocrystals and reduced graphene oxide (rGO), improving their mechanical flexibility and lithium-ion storage capacity.
- The resulting flexible anodes deliver around 1220 mAh/g over 1000 cycles with high-rate capacity, while maintaining performance even under bending, highlighting their potential for advanced energy storage solutions.
Enhancing cathode composites with conductive alignment synergy for solid-state batteries.
Sci Adv
January 2025
Department of Mechanical Engineering, University of Delaware, Newark, DE 19716, USA.
Article Synopsis
- Enhancing transport and mechanical properties in cathode composites is essential for solid-state battery performance.
- The FAST electrode features vertically aligned carbon nanotubes in a polymer electrolyte, improving ionic and electronic conductivity while reinforcing the electrode.
- This innovative design leads to excellent electrochemical performance, achieving a capacity of 148.2 mAh/g at 0.2 C over 100 cycles, indicating progress in solid-state lithium metal battery technology.
Atmospheric Pressure Chemical Ionization Q-Orbitrap Mass Spectrometry Analysis of Gas-Phase High-Energy Dissociation Routes of Triarylamine Derivatives.
Molecules
December 2024
School of Chemistry, Xi'an Key Laboratory of Sustainable Energy Material Chemistry, Engineering Research Center of Energy Storage Materials and Devices, Ministry of Education, Xi'an Jiaotong University, Xi'an 710049, China.
Triarylamine groups have been widely utilized in the development of high-performance charge-transporting or luminescent materials for fabricating organic light-emitting diodes (OLEDs). In this study, atmospheric pressure chemical ionization (APCI) Q-Orbitrap mass spectrometry was adopted to investigate the dissociation behaviors of these triarylamine derivatives. Specifically, taking [M+H] as the precursor ion, high-energy collision dissociation (HCD) experiments within the energy range from 0 to 80 eV were carried out.
View Article and Find Full Text PDF2D Conjugated Metal-Organic Frameworks for New Generation Flexible Multicolor Electrochromic Devices.
Adv Mater
December 2024
Department of Materials Science and Engineering, National University of Singapore, Singapore, 117574, Republic of Singapore.
There has been considerable interest in 2D conductive conjugated MOFs (2D c-MOFs) for their potential applications in sensors, opto-electronics, catalysis, and energy storage, owing to their ultra-high specific surface area, relatively high electrical conductivity, and tunable pore channel sizes for ion/charge diffusion/adsorption. The unique advantages brought by systematic tunings in the metal nodes and organic ligands enable the creation of highly accessible and remarkable structures with diverse chemical and physical behaviors. While the 2D c-MOFs are being explored for the rapid widening spectrum of applications, in this work, the great potential of multicolor transitions and functional properties of these 2D c-MOFs are examined for the new generation of flexible multicolor electrochromic devices (FMEDs).
View Article and Find Full Text PDFBimetallic sulfides based hybrid anodes are constructed for high-performance lithium ion batteries.
Talanta
December 2024
Laboratory of Building Energy-Saving Technology Engineering, College of Material Science and Engineering, Jilin Jianzhu University, Changchun, 130118, China. Electronic address:
Transition metal sulfides (TMSs) are considered as one of the most promising anode materials for lithium-ion batteries (LIBs) in virtue of their high theoretical specific capacity, low cost and environmental friendliness. However, the intrinsic poor electron/ion transport, large volume change and the shuttle effect of polysulfides hinder their achievement of superb rate capability and cycle performance. Compared with the monometallic sulfides, bimetallic sulfides have superior electron transport capability and higher electrochemical activity.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!