In this paper, we propose a method for narrowing the spectrum in high-power narrow-linewidth polarization-maintaining (PM) fiber amplifiers and investigate its potential for suppressing the stimulated Brillouin scattering (SBS). In this method, in addition to common phase modulation to suppress SBS, precisely designed amplitude modulation is induced to generate self-phase modulation in a high-power PM fiber amplifier. In this co-modulation way, the spectrum can be gradually compressed along the fiber. Compared to phase modulation alone or fiber-Bragg-gratings (FBGs) based narrow-linewidth fiber oscillator schemes, in which the spectrum remains the same or broadens, this scheme can achieve a higher SBS threshold for the same output spectral linewidth. Experiments on a ∼ 3 kW peak power quasi-continuous wave (QCW) fiber amplifier show that the co-modulation scheme can compress the spectrum from 0.25 nm to 0.084 nm as output peak power increases from 13 W to 3.2 kW and enhances the SBS threshold by ∼1.7 times compared to traditional FBGs-based fiber oscillator schemes, and by ∼1.4 times compared to common phase modulation schemes. This co-modulation scheme has the potential for mitigating SBS in high-power fiber amplifiers.

Download full-text PDF

Source
http://dx.doi.org/10.1364/OE.496975DOI Listing

Publication Analysis

Top Keywords

fiber amplifiers
12
phase modulation
12
high-power narrow-linewidth
8
fiber
8
common phase
8
high-power fiber
8
fiber amplifier
8
amplifier co-modulation
8
fiber oscillator
8
oscillator schemes
8

Similar Publications

In this paper, we demonstrated a novel bidirectional high-speed transmission system integrating a free-space optical (FSO) communication with a 5G wireless link, utilizing a high-power erbium-doped fibre amplifier (EDFA) for enhanced loss compensation. The system supports downlink rates of 1-Gb/s/4.5-GHz and 10-Gb/s at 24-GHz and 39-GHz, and an uplink rate of 10-Gb/s/28-GHz.

View Article and Find Full Text PDF

Space division multiplexing (SDM) with Hermite Gaussian (HG) modes, for instance, can significantly boost the transmission link capacity. However, SDM is not suitable in existing single mode fiber networks, and in long-distance wireless, microwave, THz or optical links, the far-field beam distribution may present a problem. Recently it has been demonstrated, that time domain HG modes can be employed to enhance the link capacity.

View Article and Find Full Text PDF
Article Synopsis
  • High-power tunable lasers are highly sought after for their applications in telecom, ranging, and molecular sensing, but integrated photonics has struggled with power due to size limitations.
  • The introduction of large-mode-area (LMA) fibers in the late 90s significantly improved the power capability of fiber systems by increasing the optical mode area.
  • This study demonstrates a silicon photonics-based LMA power amplifier that achieves an output power of 1.8W over a 60nm tunability range, indicating a potential advancement in integrated lasers for high-power applications that can compete with traditional bench systems.
View Article and Find Full Text PDF

Metal batteries have captured significant attention for high-energy applications, owing to their superior theoretical energy densities. However, their practical viability is impeded by severe dendrite formation and poor cycling stability. To alleviate these issues, a 3D-structured bimetallic-MoTiCT based fiber electrode was fabricated in this study and analyzed experimentally and computationally.

View Article and Find Full Text PDF

Electronically Controlled Dual-Wavelength Switchable SRS Fiber Amplifier in the NIR-II Region for Multispectral Photoacoustic Microscopy.

Laser Photon Rev

October 2024

Harvard Medical School, Boston, MA 02114, USA; Wellman Center for Photomedicine, Massachusetts General Hospital, Boston, MA 02114, USA; Department of Cardiology, Erasmus Medical Center, Rotterdam GD3015, The Netherlands; Institute for Medical Engineering and Science, Massachusetts Institute of Technology, Cambridge, MA 02142, USA.

Photoacoustic microscopy (PAM) is a high-resolution and non-invasive imaging modality that provides optical absorption contrast. By employing dual- or multiple-wavelength excitation, PAM extends its capabilities to offer valuable spectroscopic information. To achieve efficient multispectral PAM imaging, an essential requirement is a light source characterized by a high repetition rate and switching rate, a ≈microjoule pulse energy, and a ≈nanosecond pulse duration.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!