Data on the use of remote spirometry are limited in the pediatric population. We sought to assess the feasibility and accuracy of a digital turbine spirometer, Medical International Research (MIR) Spirobank Smart (MIR, New Berlin, WI, USA), compared with a pneumotachography spirometer, Pneumotrac (Vitalograph Inc., Lenexa, KS, USA), in field-based clinical research. This is a cross-sectional study of a subgroup of school-aged participants enrolled in the Air quality, Environment, and Respiratory Outcomes in Bronchopulmonary Dysplasia (BPD) study, who performed same-day paired coached baseline spirometry measurements from the Pneumotrac and MIR devices. Proportion of successful tests was estimated for each device and compared using McNemar's test. Correlation between devices forced expiratory volume in 1 second (FEV) and forced vital capacity (FVC) was analyzed by Lin's concordance correlation, and Bland-Altman plots were generated. Twenty-one participants with history of BPD completed home spirometry maneuvers on both devices. The mean age of participants was 8.7 years. The mean FEV and FVC measurement was 81% predicted and 90.4% predicted, respectively. The proportion of acceptable tests appeared higher using Pneumotrac (81%) than when using MIR (67%), although without evidence of discordance ( = 0.317). Among subjects with successful tests on both devices, Lin's concordance correlation demonstrated moderate agreement (FEV = 0.955, 95% confidence interval [CI]: 0.87-0.98; FVC = 0.971, CI: 0.91-0.99). The mean difference in FEV between Pneumotrac and MIR was 0.079 L (95% limits of agreement were -0.141 to 0.298 L) and FVC was 0.075 L (95% limits of agreement were -0.171 to 0.322 L). These were relatively small and without evidence of systematic or volume-dependent bias. Utilizing turbine spirometers may be a promising and feasible way to perform pulmonary function testing for field research in children.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10516228 | PMC |
http://dx.doi.org/10.1089/ped.2023.0046 | DOI Listing |
Materials (Basel)
November 2024
Engineering Faculty, Mondragon Unibertsitatea, Loramendi 4, 20500 Arrasate-Mondragon, Spain.
Broaching is a key manufacturing process that directly influences the surface integrity of critical components, impacting their functional performance in sectors such as aeronautics, automotive, and energy. Such components are subjected to severe conditions, including high thermomechanical loads, fatigue, and corrosion. For this reason, the development of predictive models is essential for determining the optimal tool design and machining conditions to ensure proper in-service performance.
View Article and Find Full Text PDFCommun Mater
October 2024
Chair for Simulation and Modelling of Metallurgy Processes, Department of Metallurgy, University of Leoben, A-8700 Leoben, Austria.
Segregation channels with misoriented spurious grains, known as freckles, are an unacceptable casting defect in superalloy turbine blades. A digital-twin method to predict segregation channels was proposed in our previous studies; however, the formation of spurious grains was ignored. Here, we extend the digital twin methodology by incorporating dendrite fragmentation, which is recognized as the predominant mechanism in the formation of spurious grains.
View Article and Find Full Text PDFMaterials (Basel)
October 2024
Department of Building Structures and Structural Mechanics, Faculty of Civil Engineering and Environmental Sciences, Bialystok University of Technology, Wiejska 45A, 15-351 Bialystok, Poland.
This article presents the results of an experimental study carried out to assess the possibility of using waste wind turbine blades as retaining wall structures for slopes and trenches. The use of Vestas and LM-type blades as retaining wall components was assumed, based on 'columns' made of Vestas-type closed profiles filled with concrete and 'slabs' of fragments extracted from LM-type blades. The results of the tests and comparisons of the displacement and strain values of the components obtained using different measurement methods are presented in this paper.
View Article and Find Full Text PDFPolymers (Basel)
September 2024
INEGI-Institute of Science and Innovation in Mechanical and Industrial Engineering, 4200-465 Porto, Portugal.
High electrical conductivity, along with high piezoresistive sensitivity and stretchability, are crucial for designing and developing nanocomposite strain sensors for damage sensing and on-line structural health monitoring of smart carbon fiber-reinforced polymer (CFRP) composites. In this study, the influence of the geometric features and loadings of carbon-based nanomaterials, including reduced graphene oxide (rGO) or carbon nanofibers (CNFs), on the tunable strain-sensing capabilities of epoxy-based nanocomposites was investigated. This work revealed distinct strain-sensing behavior and sensitivities (gauge factor, GF) depending on both factors.
View Article and Find Full Text PDFFuture Oncol
November 2024
Brenden-Colson Center for Pancreatic Care, Knight Cancer Institute (OHSU), OR, Portland.
Asparagine synthetase (ASNS) catalyzes the biosynthesis of asparagine from aspartate and glutamine. Cells lacking ASNS, however, are auxotrophic for asparagine. Use of L-asparaginase to promote asparagine starvation in solid tumors with low ASNS levels, such as pancreatic ductal adenocarcinoma (PDAC), is a rationale treatment strategy.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!