Single-Cell Detection of Using Bio-Functionalized SIS Sensor.

Herein, we developed a bio-functionalized solution-immersed silicon (SIS) sensor at the single-cell level to identify (), a highly infectious bacterial pathogen responsible for fire blight, which is notorious for its rapid spread and destructive impact on apple and pear orchards. This method allows for ultra-sensitive measurements without pre-amplification or labeling compared to conventional methods. To detect a single cell of , we used Lipopolysaccharide Transporter E (LptE), which is involved in the assembly of lipopolysaccharide (LPS) at the surface of the outer membrane of , as a capture agent. We confirmed that LptE interacts with via LPS through in-house ELISA analysis, then used it to construct the sensor chip by immobilizing the capture molecule on the sensor surface modified with 3'-Aminopropyl triethoxysilane (APTES) and glutaraldehyde (GA). The LptE-based SIS sensor exhibited the sensitive and specific detection of the target bacterial cell in real time. The dose-response curve shows a linearity (R > 0.992) with wide dynamic ranges from 1 to 10 cells/mL for the target bacterial pathogen. The sensor showed the value change (d) of approximately 0.008° for growing overlayer thickness induced from a single-cell , while no change in the control bacterial cell () was observed, or negligible change, if any. Furthermore, the bacterial sensor demonstrated a potential for the continuous detection of through simple surface regeneration, enabling its reusability. Taken together, our system has the potential to be applied in fields where early symptoms are not observed and where single-cell or ultra-sensitive detection is required, such as plant bacterial pathogen detection, foodborne pathogen monitoring and analysis, and pathogenic microbial diagnosis.