Most natural materials have rotational and hierarchical properties, so they can show excellent mechanical properties such as shear resistance and impact resistance. In order to further improve the energy absorption characteristics of vibration absorbing structures, a new type of honeycomb structure with integral rotation and group rotation is designed and characterized. The effects of the geometrical parameters of rotation Angle on the impact deformation mode, stress response curve and energy absorption characteristics of the honeycomb structure are studied through numerical simulation and experimental design. The results show that the overall honeycomb performance of 15° is better than that of 0°, the specific energy absorption is the results show that the overall honeycomb performance of 15° is better than that of 0°, the specific energy absorption is increased by 6%, the bearing capacity is increased by 320 N, and the crushing force efficiency is increased by 2%. Compared with the whole cell and the group cell, the specific absorption energy increased by 35%, 73% and 71%. The results of this paper provide a new insight into the impact performance of monolithic and grouped rotating honeycomb structures, which is helpful for the results of this paper provide a new insight into the impact performance of monolithic and grouped rotating honeycomb structures, which is helpful for the optimization of crashworthiness structural design.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10488828 | PMC |
| http://dx.doi.org/10.3390/ma16175993 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Optimizing Electronic and Photovoltaic Properties of D-π-A Organic Dyes for DSSCs Using Density Functional Theory.
J Fluoresc
January 2025
Department of Physics \ Collage of Sciences, University of Kufa, Najaf, Iraq.
This research utilizes density functional theory to investigate the ground and excited-state properties of a new series of organic dyes with D-π-A configurations (D1-D6) for their potential application in dye-sensitized solar cells. The study focuses on modifying these dyes using various functional groups as π-bridges to optimize their electronic properties and improve their efficiency as sensitizers in DSSCs. The frontier molecular orbitals (HOMO and LUMO) were analysed to evaluate electron transfer properties.
View Article and Find Full Text PDFIntroduction: Load carriage is an inherent part of tactical operations. Critical speed (CS) has been associated with technical and combat-specific performance measures (e.g.
View Article and Find Full Text PDFPlanetary Laser Interferometric Seismoacoustic Observatory.
Sensors (Basel)
December 2024
V.I. Il'ichev Pacific Oceanological Institute FEB RAS, 690041 Vladivostok, Russia.
The paper describes a planetary laser interferometric seismoacoustic observatory consisting of six stationary unequal arm laser strainmeters. Based on the triangulation method, the fundamentals of direction finding of various infrasound disturbances at any planetary distance have been developed. The authors show that in addition to determining locations of the occurrence of the recorded disturbance, using data from spatially separated laser strainmeters, it is possible to determine the nature of these signals' divergence and, also, the loss of their energy in the propagation medium.
View Article and Find Full Text PDFElectrolytic Ni-P and Ni-P-Cu Coatings on PCM-Loaded Expanded Graphite for Enhanced Battery Thermal Management with Mechanical Properties.
Materials (Basel)
January 2025
Department of Mechanical Engineering, Samsun University, 55420 Samsun, Turkey.
This study addresses the thermal management challenge in battery systems by enhancing phase change material composites with Ni-P and Ni-P-Cu coatings on phase change material/expanded graphite structures. Traditional phase change materials are limited by low thermal conductivity and mechanical stability, which restricts their effectiveness in high-demand applications. Unlike previous studies, this work integrates Ni-P and Ni-P-Cu coatings to significantly improve both the thermal conductivity and mechanical strength of phase change material/expanded graphite composites, filling a crucial gap in battery thermal management solutions.
View Article and Find Full Text PDFExperiment and Simulation Study on the Crashworthiness of Markforged 3D-Printed Carbon/Kevlar Hybrid Continuous Fiber Composite Honeycomb Structures.
Materials (Basel)
January 2025
Key Laboratory of Testing Technology for Manufacturing Process of Ministry of Education, Southwest University of Science and Technology, Mianyang 621010, China.
Article Synopsis
- Fiber hybridization helps address brittle fractures in composite honeycombs, but different fiber interactions create complex failure mechanisms.
- Researchers 3D-printed honeycomb composites using carbon and Kevlar fibers to study their structural failure through experiments and simulations.
- Results showed that carbon/Kevlar composites had the best energy absorption and cost-effectiveness, while CFRP had the highest load capacity; the presence of Kevlar led to ductile failure, contrasting with the brittle failure seen in Onyx honeycombs.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!