Strain sensors based on conducting polymer hydrogels are considered highly promising candidates for wearable electronic devices. However, existing conducting polymer hydrogels are susceptible to aging, damage, and failure, which can greatly deteriorate the sensing performance of strain sensors based on these substances and the accuracy of data collection under large deformation. Developing conductive polymer hydrogels with concurrent high sensing performance and self-healing capability is a critical yet challenging task to improve the stability and lifetime of strain sensors. Herein, we design a self-healable conducting polymer hydrogel by compositing poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) nanofibers and poly(vinyl alcohol) (PVA) via both physical and chemical crosslinking. This PEDOT:PSS-PVA nanocomposite hydrogel strain sensor displays an excellent strain monitoring range (>200%), low hysteresis (<1.6%), a high gauge factor (GF = 3.18), and outstanding self-healing efficiency (>83.5%). Electronic skins based on such hydrogel strain sensors can perform the accurate monitoring of various physiological signals, including swallowing, finger bending, and knee bending. This work presents a novel conducting polymer hydrogel strain sensor demonstrating both high sensing performance and self-healability, which can satisfy broad application scenarios, such as wearable electronics, health monitoring, etc.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10489763 | PMC |
http://dx.doi.org/10.3390/nano13172465 | DOI Listing |
Polymers (Basel)
February 2025
Institut für Technische und Makromolekulare Chemie, Universität Hamburg, 20146 Hamburg, Germany.
The effect of the presence of guar gum (0-0.75 wt%) in a thermo-responsive triple-network (TN) PVA/TA/PVA-MA-g-PNIPAAm hydrogel (PVA: polyvinyl alcohol; MA: methacrylate, PNIPAAm: poly-N-isopropyl acryl amide; TA: tannic acid) with respect to the structural, mechanical, and viscoelastic properties was mapped. A comprehensive analysis, using large-amplitude oscillatory shear (LAOS), SEM imaging, XRD, and mechanical analysis revealed that guar enhances hydrogel crystallinity (up to 30% at 0.
View Article and Find Full Text PDFInt J Biol Macromol
March 2025
School of Chemical Engineering, Changchun University of Technology, Changchun 130012, China.
In this paper, the dispersion stability of graphene was effectively promoted by the introduction of hydroxypropyl cellulose (HPC), a novel composite hydrogel PAM-LMA-PDA@TiO-GN was prepared. Polyacrylamide (PAM) provided the basic three-dimensional network structure, lauryl methacrylate (LMA), as the hydrophobic monomer, constructed the hydrophobic associative micro-regions inside the hydrogel, which enhanced the structural stability, and polydopamine-coated TiO (PDA@TiO), as a nano-toughness enhancement point, which endowed the hydrogel with a stress and strain of 1026 kPa and 2519 %, respectively. Hydrogels loaded with Ag nanowires (Ag NWs) and graphene (GN) were prepared using Ag nanowires as the intercalating agent, graphene as the substrate and hydrogel as the carrier, graphene and Ag nanowires endow the hydrogels with excellent electron transport capabilities.
View Article and Find Full Text PDFLangmuir
March 2025
Engineering Research Center for Biomedical Materials, Anhui Key Laboratory of Modern Biomanufacturing, School of Life Sciences, Anhui University, Hefei 230601, China.
The development of antibacterial sponges with both high water-absorbing and mechanical properties is highly desirable for attaining efficient hemostasis and closure of noncompressible wounds, but remains challenging. General methods, such as increasing porosity, to improve the water absorption of sponges inevitably compromise their mechanical properties. Herein, a chitin (CT)/quaternized chitosan (QCS) sponge with the desirable properties was fabricated by freeze-drying the chemically and physically dual cross-linked CT/QCS hydrogel with enhanced hydrophilicity.
View Article and Find Full Text PDFNatl Sci Rev
April 2025
Center for X-Mechanics, Department of Engineering Mechanics, Zhejiang University, Hangzhou 310027, China.
Gallium-based liquid metals, when combined with magnetic agents, emerge as intelligent materials with potential applications in soft robotics within biomedical engineering. However, concerns have arisen from the residual presence of liquid metal, raising long-term biological risks. Herein, we propose a containment method that involves the rolling of magnetic liquid-metal droplets in lyophilized powders, resulting in the formation of intact hydrogel coatings upon hydration.
View Article and Find Full Text PDFNat Commun
March 2025
State Key Lab of Metal Matrix Composites, School of Materials Science and Engineering and Zhangjiang Institute for Advanced Study, Shanghai Jiao Tong University, Shanghai, China.
Physical hydrogels, three-dimensional polymer networks with reversible cross-linking, have been widely used in many developments throughout the history of mankind. However, physical hydrogels face significant challenges in applications due to wound rupture and low elasticity. Some self-heal wounds with strong ionic bond throughout the network but struggle to immediately recover during cyclic operation.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!