Categorization of hotspots into three types - weak, moderate and strong to distinguish protein-protein protein-peptide interactions.

Protein-protein and protein-peptide interactions (PPI and PPepI) belong to a similar category of interactions, yet seemingly subtle differences exist among them. To characterize differences between protein-protein (PP) and protein-peptide (PPep) interactions, we have focussed on two important classes of residues-hotspot and anchor residues. Using implicit solvation-based free energy calculations, a very large-scale alanine scanning has been performed on benchmark datasets, consisting of over 5700 interface residues. The differences in the two categories are more pronounced, if the data were divided into three distinct types, namely - weak hotspots (having binding free energy loss upon Ala mutation, ΔΔG, ∼2-10 kcal/mol), moderate hotspots (ΔΔG, ∼10-20 kcal/mol) and strong hotspots (ΔΔG ≥ ∼20 kcal/mol). The analysis suggests that for PPI, weak hotspots are predominantly populated by polar and hydrophobic residues. The distribution shifts towards charged and polar residues for moderate hotspot and charged residues (principally Arg) are overwhelmingly present in the strong hotspot. On the other hand, in the PPepI dataset, the distribution shifts from predominantly hydrophobic and polar (in the weak type) to almost similar preference for polar, hydrophobic and charged residues (in moderate type) and finally the charged residue (Arg) and Trp are mostly occupied in the strong type. The preferred anchor residues in both categories are Arg, Tyr and Leu, possessing bulky side chain and which also strike a delicate balance between side chain flexibility and rigidity. The present knowledge should aid in effective design of biologics, by augmentation or disruption of PPIs with peptides or peptidomimetics.Communicated by Ramaswamy H. Sarma.