AI Article Synopsis
- Refuse-derived fuel (RDF) is a useful way to manage rural municipal waste, but burning it releases chlorine, leading to pollution and corrosion issues.
- In combustion tests at different temperatures, organic chlorine was released below 800 °C, while inorganic chlorine was released above 900 °C, with granulation pressure affecting release timing and amounts.
- Calcium-based additives, particularly CaO, significantly improved dechlorination, achieving over 90% efficiency at 900 °C; however, their effectiveness was influenced by granulation pressure during heating.
Article Abstract
The preparation of refuse-derived fuel (RDF) is an effective and simple means of rural municipal solid waste utilization. The release of chlorine during RDF combustion is important as it causes high-temperature corrosion and pollutants emission such as HCl, dioxins, In this paper, constant-temperature and increasing-temperature combustion experiments were carried out using an electrically heating furnace to analyse the effects of granulation (pressure and additives) on the release of chlorine in particles. During the constant-temperature combustion below 800 °C, only organic chlorine was released from the RDF. The increase of granulation pressure from 1 MPa to 10 MPa did not affect the total amount of chlorine release, but delayed the organic chlorine release by increasing the gas diffusion resistance. During the constant-temperature combustion above 900 °C, inorganic chlorine was released as well. The increase of granulation pressure enhanced the inorganic chlorine release significantly by promoting the reactants contact. During the increasing-temperature combustion, the increase of granulation pressure delayed the organic chlorine release as well but inhibited the inorganic chlorine release. This was mainly attributed to the slow temperature rise to 900 °C, during which the inherent calcium in the RDF reacted with silicon and aluminium, resulting in less reactants for an inorganic chlorine release reaction. Three calcium-based additives were used to inhibit chlorine release. CaCO showed no dechlorination effect, and CaO showed better dechlorination effect than Ca(OH). For the constant-temperature combustion at 900 °C, the addition of CaO with a Ca/Cl ratio of 2 achieved a dechlorination efficiency of over 90%, with little influence from the granulation pressure. For the increasing-temperature combustion, the granulation pressure had a significant influence on CaO dechlorination effectiveness. Only at a granulation pressure as high as 10 MPa, did the addition of CaO with the Ca/Cl ratio of 2.5 achieve a dechlorination efficiency of 95%.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10441276 | PMC |
| http://dx.doi.org/10.1039/d3ra04615j | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Application of thermally assisted high hydrostatic pressure to modify sorghum starch: multi-scale structure, techno-functional properties and digestibility.
J Food Sci Technol
January 2025
Department of Food Engineering and Technology, School of Food Engineering, Universidade Estadual de Campinas (UNICAMP), Monteiro Lobato 80, 6121, Campinas, SP 3083-862 Brazil.
Unlabelled: The effects of high hydrostatic pressure (HHP) (400-650 MPa) and holding temperature (25-50 °C) in thermally assisted HHP processing on multi-scale structure of starch (granule, crystalline and molecular), techno-functional properties, and digestibility of sorghum starch (SS) were evaluated. Response surface methodology has verified that the process impact on the modification of SS was dependent primarily on the pressure level. As HHP increased, processed SS progressively lost their granular structure and Maltese cross, indicating gradual structural disorder within the granules.
View Article and Find Full Text PDFEffects of glutathione on the physicochemical properties of high hydrostatically pressure gelatinized maize starch.
Food Chem X
January 2025
College of Tea Science, Yunnan Agricultural University, Kunming 650500, China.
This research prepared gelatinized waxy maize starch (WMS), low-amylose maize starch (LAS), and high-amylose maize starch (HAS) with different glutathione (GSH) content (5, 10, and 15 %) using high hydrostatic pressure (HHP) at 600 MPa. Scanning electron microscopy (SEM) revealed damaged morphology of WMS and complete swelled granules of LAS and HAS with different degree of gelatinization (DG) values, 92.86, 59.
View Article and Find Full Text PDFEnhancing Patient-Centric Drug Development: Coupling Hot Melt Extrusion with Fused Deposition Modeling and Pressure-Assisted Microsyringe Additive Manufacturing Platforms with Quality by Design.
Pharmaceutics
December 2024
Drug Product Development, Continuus Pharmaceuticals, Woburn, MA 01801, USA.
In recent years, with the increasing patient population, the need for complex and patient-centric medications has increased enormously. Traditional manufacturing techniques such as direct blending, high shear granulation, and dry granulation can be used to develop simple solid oral medications. However, it is well known that "one size fits all" is not true for pharmaceutical medicines.
View Article and Find Full Text PDFWounds from gunshots and other explosive devices are a source of loss of substances directly or secondary to a well- conducted debridement. In addition, these types of wounds are by definition contaminated. The major challenge in this context for any surgeon remains coverage.
View Article and Find Full Text PDFThe effect of physical cues on platelet storage lesion.
Hematology
December 2025
Department of Blood Transfusion, First Affiliated Hospital, Third Military Medical University (Army Medical University), Chongqing, People's Republic of China.
Background: Platelet concentrates play an important role in clinical treatment such as platelet function disorders and thrombocytopenia. In the process of preparation and storage of platelets, centrifugation, leukofiltration, and agitation will cause morphological changes and impaired function of platelets, which is associated with the increase of platelet transfusion refractoriness, and named as platelet storage lesion (PSL).
Method: This paper proposes three major operations (centrifugation, agitation, and leukofiltration) that platelets experience during the preparation and storage process, to explore the effect of physical cues on PSL.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!