Analytical method development supported by DoE-DS approach for enantioseparation of (S,S)- and (R,R)-moxifloxacin.

In this paper, method for enantiomeric purity testing of fourth-generation fluoroquinolone, moxifloxacin hydrochloride, was developed and validated. Exceptional enantioselectivity for this assay was achieved using cyclodextrin type Chiral Stationary Phase (CSP), phenylcarbamate-β-cyclodextrin CSP, and mobile phase consisted of acetonitrile and triethylammonium acetate (TEAA) buffer. Analytical Quality by Design (AQbD) methodology, comprising Design of Experiments (DoE) - Design Space (DS) approach, was used for method development. In order to select appropriate Critical Method Parameters (CMPs), risk assessment was done using combined three step strategy that involved Ishikawa diagram - CNX (Control, Noise and eXperimental) - FMEA (Failure Mode and Effect Analysis). Three CMPs were further selected and investigated in this study: acetonitrile content in the mobile phase (30-50%, v/v), triethylamine content in the TEAA buffer (0.1-1.5%, v/v) and aqueous phase pH (3.5-4.5). Monte Carlo simulations were performed and 3D-DS was computed. One point situated in the center of 3D-DS was selected as working point for method validation, with the following values of CMPs: acetonitrile content in the mobile phase set to 37% (v/v), triethylamine content in TEAA 0.8% and pH value of the aqueous phase set at 4.0. Also, 2D-DS was created (with fixed one factor - pH value of aqueous phase at 4.0) which also gave us confirmation that the selection of working conditions was suitable. The proposed enantioselective method was further on tested for its quantitative robustness, as well as for its suitability for the intended purpose through validation studies.