Pedestrian Positioning Using an Enhanced Ensemble Transform Kalman Filter.

Sensors (Basel)

Department of Software, Sangmyung University, Cheonan-si 31066, Republic of Korea.

Published: August 2023

Due to the unavailability of GPS indoors, various indoor pedestrian positioning approaches have been designed to estimate the position of the user leveraging sensory data measured from inertial measurement units (IMUs) and wireless signal receivers, such as pedestrian dead reckoning (PDR) and received signal strength (RSS) fingerprinting. This study is similar to the previous study in that it estimates the user position by fusing noisy positional information obtained from the PDR and RSS fingerprinting using the Bayes filter in the indoor pedestrian positioning system. However, this study differs from the previous study in that it uses an enhanced state estimation approach based on the ensemble transform Kalman filter (ETKF), called QETKF, as the Bayes filer for the indoor pedestrian positioning instead of the SKPF proposed in the previous study. The QETKF estimates the updated user position by fusing the predicted position by the PDR and the positional measurement estimated by the RSS fingerprinting scheme using the ensemble transformation, whereas the SKPF calculates the updated user position by fusing them using both the unscented transformation (UT) of UKF and the weighting method of PF. In the field of Earth science, the ETKF has been widely used to estimate the state of the atmospheric and ocean models. However, the ETKF algorithm does not consider the model error in the state prediction model; that is, it assumes a perfect model without any model errors. Hence, the error covariance estimated by the ETKF can be systematically underestimated, thereby yielding inaccurate state estimation results due to underweighted observations. The QETKF proposed in this paper is an efficient approach to implementing the ETKF applied to the indoor pedestrian localization system that should consider the model error. Unlike the ETKF, the QETKF can avoid the systematic underestimation of the error covariance by considering the model error in the state prediction model. The main goal of this study is to investigate the feasibility of the pedestrian position estimation for the QETKF in the indoor localization system that uses the PDR and RSS fingerprinting. Pedestrian positioning experiments performed using the indoor localization system implemented on the smartphone in a campus building show that the QETKF can offer more accurate positioning results than the ETKF and other ensemble-based Kalman filters (EBKFs). This indicates that the QETKF has great potential in performing better position estimation with more accurately estimated error covariances for the indoor pedestrian localization system.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10422569PMC
http://dx.doi.org/10.3390/s23156870DOI Listing

Publication Analysis

Top Keywords

pedestrian positioning
20
indoor pedestrian
20
rss fingerprinting
16
localization system
16
previous study
12
user position
12
position fusing
12
model error
12
pedestrian
9
ensemble transform
8

Similar Publications

Robust Indoor Pedestrian Backtracking Using Magnetic Signatures and Inertial Data.

Int Conf Indoor Position Indoor Navig

October 2024

Department of Computer Science & Engineering, University of California, Santa Cruz, Santa Cruz, USA.

Navigating unfamiliar environments can be challenging for visually impaired individuals due to difficulties in recognizing distant landmarks or visual cues. This work focuses on a particular form of wayfinding, specifically backtracking a previously taken path, which can be useful for blind pedestrians. We propose a hands-free indoor navigation solution using a smartphone without relying on pre-existing maps or external infrastructure.

View Article and Find Full Text PDF

Accurate localization is crucial for numerous applications. While several methods exist for outdoor localization, typically relying on GPS signals, these approaches become unreliable in environments subject to a weak GPS signal or GPS outage. Many researchers have attempted to address this limitation, primarily focusing on real-time solutions.

View Article and Find Full Text PDF

Development of an Equivalent Analysis Model of PVB Laminated Glass for TRAM Crash Safety Analysis.

Polymers (Basel)

December 2024

Department of Mechanical Engineering, Hanyang University ERICA, 55, Hanyangdaehak-ro, Sangnok-gu, Ansan-si 15588, Gyeonggi-do, Republic of Korea.

This study focuses on an equivalent model of Polyvinyl Butyral (PVB) laminated glass to simulate the Head Injury Criterion (HIC) when a pedestrian collides with a TRAM. To simulate the collision behavior that occurs when a pedestrian's head collides with PVB laminated glass, a comparison was made between the results of the widely used PLC model for PVB laminated glass modeling and an actual dynamic head impact test. The material properties of the tempered glass and PVB film used in the PLC and equivalent models were obtained via four-point bending tests and tensile tests, respectively.

View Article and Find Full Text PDF

"Smart" devices, such as contemporary smartphones and PDAs (Personal Digital Assistance), play a significant role in our daily live, be it for navigation or location-based services (LBSs). In this paper, the use of Ultra-Wide Band (UWB) and Wireless Fidelity (Wi-Fi) based on RTT (Round-Trip Time) measurements is investigated for pedestrian user localization. For this purpose, several scenarios are designed either using real observation or simulated data.

View Article and Find Full Text PDF

Research on Deep Learning Detection Model for Pedestrian Objects in Complex Scenes Based on Improved YOLOv7.

Sensors (Basel)

October 2024

School of Electrical and Mechanical Engineering and Vehicle Engineering, East China Jiaotong University, Nanchang 330013, China.

Objective: Pedestrian detection is very important for the environment perception and safety action of intelligent robots and autonomous driving, and is the key to ensuring the safe action of intelligent robots and auto assisted driving.

Methods: In response to the characteristics of pedestrian objects occupying a small image area, diverse poses, complex scenes and severe occlusion, this paper proposes an improved pedestrian object detection method based on the YOLOv7 model, which adopts the Convolutional Block Attention Module (CBAM) attention mechanism and Deformable ConvNets v2 (DCNv2) in the two Efficient Layer Aggregation Network (ELAN) modules of the backbone feature extraction network. In addition, the detection head is replaced with a Dynamic Head (DyHead) detector head with an attention mechanism; unnecessary background information around the pedestrian object is also effectively excluded, making the model learn more concentrated feature representations.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!