A new electrochromic copolymer based on 4,7-di(thiophen-2-yl)benzo[c] [1,2,5]thiadiazole and 3,4-ethylenedioxythiophene was successfully obtained via the electrochemical polymerization method in the medium of electrolyte solution, which consists of 0.1 M tetrabutylammonium hexafluorophosphate and dichloromethane. In order to compare the electrochemical and chemical properties of the copolymer, the benzothiodiazole derivative and 3,4-ethylenedioxythiophene (EDOT) monomers, which are parts of the copolymer, are electrochemically polymerized, separately in the same environment and concentration with the copolymer. Poly(4,7-di(thiophen-2-yl)benzo[c][1,2,5]thiadiazole) (P(TBT)) and poly(3,4-ethylenedioxythiophene) (PEDOT) polymers were obtained. Before starting the electrochemical synthesis, the initial oxidation potentials of the monomers that form the copolymer were compared via the cyclic voltammeter method in this solvent electrolyte medium. Then, electrochemical and spectroelectrochemical characterizations of electrochemically synthesized polymers and copolymers were performed. New copolymer shows metallic blue and centaury blue in its neutral and oxidized states, respectively with a low band gap of 1.32 eV. Moreover, the copolymer has a 59% optical contrast and high coloration efficiency (324 cmC) at 585 nm with a switching time of 2.2 s.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10390108 | PMC |
| http://dx.doi.org/10.55730/1300-0527.3456 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Improving the Electrochemical and Electrochromic Properties of Copolymerized 3,4-Ethylenedioxythiophene with Pyrene.
Polymers (Basel)
December 2024
School of Packaging and Materials Engineering, Hunan University of Technology, Zhuzhou 412007, China.
Pyrene (Pr) was used to improve the electrochemical and electrochromic properties of polythiophene copolymerized with 3,4-ethylenedioxythiophene (EDOT). The corresponding product, poly(3,4-ethylenedioxythiophene-co-Pyrene) (P(EDOT-co-Pr)), was successfully synthesized by electrochemical polymerization with different monomer concentrations in propylene carbonate solution containing 0.1 M lithium perchlorate (LiClO/PC (0.
View Article and Find Full Text PDFFacile Synthesis of Novel Conducting Copolymers Based on N-Furfuryl Pyrrole and 3,4-Ethylenedioxythiophene with Enhanced Optoelectrochemical Performances Towards Electrochromic Application.
Molecules
December 2024
College of Chemistry and Pharmaceutical Engineering, Nanyang Normal University, Nanyang 473061, China.
In this article, a series of novel conducting copolymers P(FuPy--EDOT) are prepared via cyclic voltammetry electropolymerization method by using N-furfuryl pyrrole (FuPy) and 3,4-ethylenedioxythiophene (EDOT) as comonomers. The molecular structure, surface morphology, electrochemical, and optical properties of the resulting copolymers are characterized in detail upon varying the feed ratios of FuPy/EDOT in the range of 1/1 to 1/9. The results demonstrate that the prepared P(FuPy--EDOT) copolymers with a higher proportion of EDOT units (FuPy/EDOT: 2/8~1/9) possess good redox activity, tunable optical absorption performances, and low band gaps (1.
View Article and Find Full Text PDFLong-Range Supramolecular Assembly of a Pyrene-Derivatized Polythiophene/MWCNT Hybrid for Resilient Flexible Electrochromic Displays.
ACS Appl Eng Mater
November 2024
Institute of Organic Chemistry, University of Vienna, Währinger Straße 38, 1090 Vienna, Austria.
Organic electrochromic polymers hold great potential for integration into low-power flexible electrochromic displays (F-ECDs) due to their wide range of colors and simple processing. However, challenges such as inefficient charge transfer and degradation upon device integration hinder their practical applications. Herein, we report an innovative, general approach that utilizes template-induced supramolecular nanostructuring to engineer established electrochromic polymers, enhancing their performance and durability.
View Article and Find Full Text PDFHigh-Performance Black Copolymers Enabling Full Spectrum Control in Electrochromic Devices.
Nat Commun
September 2024
Frontiers Science Center for Flexible Electronics, Xi'an Institute of Flexible Electronics (IFE), Northwestern Polytechnical University (NPU), Xi'an, China.
Black-to-transparent electrochromism is hailed as the holy grail of organic optoelectronics. Despite its potential, designing black electrochromic materials that fully absorb visible light remains a significant challenge. Electroactive materials that simultaneously possess excellent cyclic stability, fast switching times, and high coloration efficiency are rare.
View Article and Find Full Text PDF3,6-Dimethoxythieno[3,2-b]thiophene-Based Bifunctional Electrodes for High-Performance Electrochromic Supercapacitors Prepared by One-Step Electrodeposition.
Polymers (Basel)
August 2024
State Key Laboratory of Electronic Thin Films and Integrated Devices, School of Optoelectronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu 610054, China.
An integrated visual energy system consisting of conjugated polymer electrodes is promising for combining electrochromism with energy storage. In this work, we obtained copolymer bifunctional electrodes poly(3,6-dimethoxythieno[3,2-b]thiophene--2,3-dihydrothieno[3,4-b][1,4]dioxin-3-ylmethanol)(P(TT-OMe--EDTM)) by one-step electrochemical copolymerization, which exhibits favorable electrochromic and capacitive energy storage properties. Because of the synergistic effect of PTT-OMe and PEDTM, the prepared copolymers show better flexibility.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!