A novel sinusoidal design for an electrocoagulation reactor followed by an electro-Fenton reaction and a porous ceramic filter for the treatment of polluted waters.

In this research work, a novel design of an electro-Fenton reactor for the treatment of polluted water was investigated. In addition to the reactor with iron electrodes, a ceramic filter was also used. An electrical circuit was designed to change the cathodes and anodes every 24 s via an electrical relay between the electrodes. The untreated water was sucked into the reactor with an air pump and entered the electrocoagulation chamber after filtration with a ceramic filter. Then, it flows to the polyethylene filter to separate the coagulated particles from the fresh water. To produce 12 L of clean water, the system consumed 100 W of energy. Analysis of a river sample showed a reduction in nephelometric turbidity units (NTUs), total suspended solids (TSS), biochemical oxygen demand (BOD), and chemical oxygen demand (COD). Turbidity reduction studies have shown that the system can improve water transparency by 95%, thereby improving water quality to acceptable levels. Further, this system reduced TSS by more than 86%. In addition, BOD was reduced by more than 84% and COD by more than 88%, as shown by the change in the ratio of BOD to COD from 0.44 to 0.625, indicating improved water quality. According to the results, the treatment system can clean polluted waters, particularly during floods and when industries discharge their effluents into rivers.