This work examined the functional properties of three different treated fabrics, cotton, polyester, and cotton/polyester, with different polymeric materials (polyvinyl alcohol (PVA), carboxymethyl cellulose (CMC), or chitosan) in the presence and absence of two synthesized metal nanoparticles to impart and enhance fabric properties. Both metal nanoparticles (silver nanoparticle (AgNPs) and Zinc oxide nanoparticles (ZnONPs)) were synthesized using Leaves and characterized using different techniques. The different treated fabrics were dyed with Reactive Dye (Syozol red k-3BS) and evaluated for their color strength, fastness properties, ultraviolet protection, antimicrobial activity, and mechanical properties. Results showed that treatment with polyvinyl alcohol (PVA), carboxymethyl cellulose (CMC), or chitosan enhances the functionality of all fabrics, with improved color strength, UV protection, and antimicrobial properties. Additionally, mechanical properties were slightly increased due to the creation of a thin film on the fabric surface. All dyed treated fabrics showed good ultraviolet protection and antimicrobial properties. The K/S of all treated textiles including nanoparticles and polymers was marginally greater than that of the treated materials without polymers. The UPF values demonstrate that the three investigated polymers and both metal nanoparticles enhance the fabrics' ability to block UV radiation and shield people's skin from its damaging effects. All treated textiles had UPF values that are higher than those of untreated textiles. Further research demonstrates that ZnONP-treated textiles exhibited greater UPF values than AgNP-treated textiles when the polymer component was present. Antibacterial examination demonstrated that treated materials had robust microbial resistance. This resistance is diminished by washing, but still prevents bacterial growth more effectively than untreated textiles.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10385963 | PMC |
http://dx.doi.org/10.3390/polym15143047 | DOI Listing |
Front Biosci (Landmark Ed)
January 2025
Institute of Translational Medicine, Shanghai University, 200444 Shanghai, China.
Background: Dexamethasone has proven life-saving in severe acute respiratory syndrome (SARS) and COVID-19 cases. However, its systemic administration is accompanied by serious side effects. Inhalation delivery of dexamethasone (Dex) faces challenges such as low lung deposition, brief residence in the respiratory tract, and the pulmonary mucus barrier, limiting its clinical use.
View Article and Find Full Text PDFPolymers (Basel)
January 2025
Department of Chemical Engineering, Dr B R Ambedkar National Institute of Technology, Jalandhar 144011, Punjab, India.
Antimicrobial polymeric coatings rely not only on their surface functionalities but also on nanoparticles (NPs). Antimicrobial coatings gain their properties from the addition of NPs into a polymeric matrix. NPs that have been used include metal-based NPs, metal oxide NPs, carbon-based nanomaterials, and organic NPs.
View Article and Find Full Text PDFPolymers (Basel)
January 2025
College of Resources, Environment and Materials, Guangxi University, Nanning 530004, China.
In this paper, alumina-modified wood liquefaction (AL-WP) was prepared by blending nano-alumina (AlO) into wood liquefaction phenolic resin (WP) using a co-blending method. Alumina-modified wood liquefaction protofilament fiber (AL-WPF) was obtained by melt-spinning, curing, and thermo-curing processes, which were followed by carbonization to obtain alumina-modified wood liquefaction carbon fiber (AL-WCF). This paper focuses on the enhancement effect of nano-alumina doping on the mechanical properties and heat resistance of wood liquefaction carbon fiber (WCF), explores the evolution of graphite microcrystalline structure during the high-temperature carbonization process, and optimizes the curing conditions of AL-WPF.
View Article and Find Full Text PDFPathogens
December 2024
Department of Inorganic and Analytical Chemistry, Faculty of Chemistry, Rzeszów University of Technology, Powstańców Warszawy 6, 35-959 Rzeszów, Poland.
and are challenging to differentiate using methods such as phenotyping, 16S rRNA sequencing, or protein profiling through matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS) due to their close relatedness. This study explores the potential for identifying and by incorporating reference spectra of metabolite profiles, obtained via surface-assisted laser desorption/ionization mass spectrometry (SALDI MS) employing gold nanoparticles (AuNPs), into the Bruker Biotyper database. Metabolite extracts from and cells were prepared using liquid-liquid extraction in a chloroform-methanol-water system.
View Article and Find Full Text PDFSensors (Basel)
January 2025
Jiangsu Key Laboratory of TCM Evaluation and Translational Research, School of Traditional Chinese Pharmacy, China Pharmaceutical University, Nanjing 211198, China.
Flavokavain B (FKB), a hepatotoxic chalcone from (kava), has raised safety concerns due to its role in disrupting redox homeostasis and inducing apoptosis in hepatocytes. Conventional chromatographic methods for FKB detection, while sensitive, are costly and impractical for field applications. In this work, DNA aptamers were selected using the library-immobilized method and high-throughput sequencing.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!