Piezotronic and piezo-phototronic effects have been extensively applied to modulate the performance of advanced electronics and optoelectronics. In this study, to systematically investigate the piezotronic and piezo-phototronic effects in field-effect transistors (FETs), a core-shell structure-based Si/ZnO nanowire heterojunction FET (HJFET) model was established using the finite element method. We performed a sweep analysis of several parameters of the model. The results show that the channel current increases with the channel radial thickness and channel doping concentration, while it decreases with the channel length, gate doping concentration, and gate voltage. Under a tensile strain of 0.39‱, the saturation current change rate can reach 38%. Finally, another core-shell structure-based ZnO/Si nanowire HJFET model with the same parameters was established. The simulation results show that at a compressive strain of -0.39‱, the saturation current change rate is about 18%, which is smaller than that of the Si/ZnO case. Piezoelectric potential and photogenerated electromotive force jointly regulate the carrier distribution in the channel, change the width of the channel depletion layer and the channel conductivity, and thus regulate the channel current. The research results provide a certain degree of reference for the subsequent experimental design of Zn-based HJFETs and are applicable to other kinds of FETs.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10385595PMC
http://dx.doi.org/10.3390/mi14071335DOI Listing

Publication Analysis

Top Keywords

piezotronic piezo-phototronic
12
core-shell structure-based
12
field-effect transistors
8
piezo-phototronic effects
8
hjfet model
8
channel
8
channel current
8
doping concentration
8
saturation current
8
current change
8

Similar Publications

Piezotronic and piezo-phototronic effects have been extensively applied to modulate the performance of advanced electronics and optoelectronics. In this study, to systematically investigate the piezotronic and piezo-phototronic effects in field-effect transistors (FETs), a core-shell structure-based Si/ZnO nanowire heterojunction FET (HJFET) model was established using the finite element method. We performed a sweep analysis of several parameters of the model.

View Article and Find Full Text PDF

The piezotronic effect is a coupling effect of semiconductor and piezoelectric properties. The piezoelectric potential is used to adjust the p-n junction barrier width and Schottky barrier height to control carrier transportation. At present, it has been applied in the fields of sensors, human-machine interaction, and active flexible electronic devices.

View Article and Find Full Text PDF

Recent Development of Multifunctional Sensors Based on Low-Dimensional Materials.

Sensors (Basel)

November 2021

Information Science Academy of China Electronics Technology Group Corporation, Beijing 100086, China.

With the demand for accurately recognizing human actions and environmental situations, multifunctional sensors are essential elements for smart applications in various emerging technologies, such as smart robots, human-machine interface, and wearable electronics. Low-dimensional materials provide fertile soil for multifunction-integrated devices. This review focuses on the multifunctional sensors for mechanical stimulus and environmental information, such as strain, pressure, light, temperature, and gas, which are fabricated from low-dimensional materials.

View Article and Find Full Text PDF

Characterizing and Optimizing Piezoelectric Response of ZnO Nanowire/PMMA Composite-Based Sensor.

Nanomaterials (Basel)

June 2021

Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon, LGEF, EA682, F-69621 Villeurbanne, France.

Due to the outstanding coupling between piezoelectric and semiconducting properties of zinc oxide nanowires, ZnO NW-based structures have been demonstrating promising potential with respect to their applicability in piezoelectric, piezotronic and piezo-phototronic devices. Particularly considering their biocompatibility and biosafety for applications regarding implantable medical detection, this paper proposed a new concept of piezoelectric composite, i.e.

View Article and Find Full Text PDF

Robust Piezo-Phototronic Effect in Multilayer γ-InSe for High-Performance Self-Powered Flexible Photodetectors.

ACS Nano

June 2019

State Key Laboratory of Material Processing and Die and Mould Technology, School of Materials Science and Engineering , Huazhong University of Science and Technology, Wuhan 430074 , P.R. China.

The piezo-phototronic effect has been promising as an effective means to improve the performance of two-dimensional (2D) semiconductor based optoelectronic devices. However, the current reported monolayer 2D semiconductors are not regarded as suitable for actual flexible piezotronic photodetectors due to their insufficient optical absorption and mechanical durability, although they possess strong piezoelectricity. In this work, we demonstrate that, unlike 2H-phase transition-metal dichalcogenides, γ-phase InSe with a hexagonal unit cell possesses broken inversion symmetry in all the layer numbers and has a strong second-harmonic generation effect.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!