Cellulose and copolymers of acrylonitrile (PAN) are characterized by their chemical resistance to several conventional solvents. Therefore, these polymers are often used to obtain membranes for the recovery of such solvents. In this work, for the first time, composite membranes formed from highly concentrated mixed solutions based on cellulose and PAN are considered (the total content of polymers is 18 wt.%). For mixed solutions, the morphology and rheological behavior were evaluated. It is shown that the resulting solutions are two-phase, and their morphology depends on the components' ratio and the system's history. The non-monotonous change in the viscosity with the PAN content indicates a specific interaction of cellulose and PAN in N-methylmorpholine-N-oxide solutions. The rheological behavior of mixed solutions allows for their processing in conditions identical to those of cellulose solutions. The introduction of PAN into the cellulose matrix promotes a decrease in the structural order in the system, affecting the membranes' transport properties. For composite membranes, it was found that with an increase in the content of the PAN phase, the retention of Remazol and Orange decreases, while the observed values are several times higher than those for cellulose membranes. The permeability of ethanol increases with increasing terpolymer content.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10385021 | PMC |
http://dx.doi.org/10.3390/membranes13070667 | DOI Listing |
Appl Biochem Biotechnol
December 2024
School of Metallurgy, Northeastern University, Shenyang, China.
Electrochemical and shake flask tests were used to examine the corrosion characteristics of typical gangue minerals in biometallurgical systems and their impact on microbial communities. The results show that the solubility order of the three gangue minerals is feldspar, mica, and quartz in descending order. Their corrosion processes are mainly controlled by cathodic electron-donating processes.
View Article and Find Full Text PDFPrev Chronic Dis
December 2024
Community Impact Office, Markey Cancer Center, University of Kentucky, Lexington.
Introduction: Kentucky has the highest all-site cancer incidence and death rate in the US. In 2021, the University of Kentucky Markey Cancer Center convened a steering committee to conduct a statewide community cancer needs assessment (CNA). The goal of the final CNA phase was to gather community input on prioritizing Kentucky's cancer-related needs and ways to address them.
View Article and Find Full Text PDFInorg Chem
December 2024
School of Chemistry and Chemical Engineering, Henan Key Laboratory of Boron Chemistry and Advanced Materials, Henan Normal University, Xinxiang, Henan 453007, China.
Improved methods for the synthesis of BH and a series of -heterocycle-coordinated BH complexes (-Het·BH) have been developed with readily obtained KBH as the starting material. Oxidation of KBH could provide BH in over 90% yield. Then, the -Het·BH complexes were prepared from the as-synthesized BH through in situ multistep reactions by reacting with NaH, -heterocycles, and dilute hydrochloric acid.
View Article and Find Full Text PDFPhotochem Photobiol
December 2024
Instituto de Química, Universidade de São Paulo, São Paulo, SP, Brazil.
Pyranoflavylium cations are synthetic analogues of pyranoanthocyanins, the much more color-stable compounds that are formed spontaneously from grape anthocyanins during the maturation of red wines. In the present work, our studies of the photophysical properties of pyranoanthocyanin analogues are extended to include nine pyranoflavylium cations substituted with one or two bromo and/or iodo heavy atoms. The room temperature fluorescence, 77 K fluorescence and phosphorescence, triplet formation in solution, and sensitized singlet oxygen formation, with excited state acidity suppressed by the addition of trifluoroacetic acid, are compared to those of similar pyranoflavylium cations that do not contain a heavy atom.
View Article and Find Full Text PDFACS Nano
December 2024
School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology (UNIST), 50 UNIST-gil, Ulju-gun, Ulsan 44919, South Korea.
Polythiophene donors offer scalable and cost-effective solutions for the organic photovoltaic industry. A thorough understanding of the structure-property-performance relationship is essential for advancing polythiophene-based organic solar cells (PTOSCs) with high power conversion efficiencies (PCEs). Herein, we develop two polythiophene donors─PTTz-CN and PTTz-CN(T2)─to verify the energy loss-quantum efficiency relationship.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!