Two tombs of the Southern Tang Dynasty (Qinling Tomb and Shunling Tomb), the most important cultural heritages in China, were built for emperors 1000 years ago and decorated with murals and stone sculptures. After their excavation in the 1950s, it was found that drastic fluctuations in the environment within the tombs had caused multiple diseases, such as salt efflorescence, powdering, and biodeterioration, which led to irreversible damage to the murals. This research comprised long-term (yearly) environmental monitoring and short-term (monthly) investigation into the distribution of salt crystallization and microbial growth within the two tombs. The objective was to unveil the relationship between the temporal and spatial distributions of the mural diseases and environmental characteristics while proposing a promising environmental regulation strategy for relic conservation. The results showed a gradual reduction in temperature fluctuation from the entrance to the back chamber and a distinct vertical stratification in relative humidity. The relative humidity in the upper areas of the tombs reached 100% during summer, while it averaged around 40-50% in the lower areas during winter. Consequently, significant condensation was observed on the ceiling in summer, whereas salt crystallization occurred on the murals in the lower space in winter. The distribution of these diseases was influenced by the airflow exchange between the interior and exterior. Furthermore, the structural disparities between the two tombs contributed to higher relative humidity and greater microorganism coverage in the Shunling Tomb compared to the Qinling Tomb. From the abovementioned findings, we suggest that microclimate control is essential for mitigating mural deterioration and should be paid more attention in the future.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10366430 | PMC |
http://dx.doi.org/10.1016/j.heliyon.2023.e18054 | DOI Listing |
Int J Pharm
January 2025
Departamento de Farmacología, Farmacia y Tecnología Farmacéutica, I+D Farma (GI-1645), Facultad de Farmacia, Instituto de Materiales (iMATUS) and Health Research Institute of Santiago de Compostela (IDIS), Universidade de Santiago de Compostela, 15782 Santiago de Compostela, Spain; FABRX Artificial Intelligence, Carretera de Escairón, 14, Currelos (O Saviñao) CP 27543, Spain; FABRX Ltd., Henwood House, Henwood, Ashford, Kent TN24 8DH, UK; Department of Pharmaceutics, UCL School of Pharmacy, University College London, 29-39 Brunswick Square, London WC1N 1AX, UK. Electronic address:
Compounding medications in pharmacies is a common practice for patients with prescriptions that are not available commercially, but it is a laborious and error-prone task. The incorporation of emerging technologies to prepare personalised medication, such as 3D printing, has been delayed in smaller pharmacies due to concerns about potential workflow disruptions and learning curves associated with novel technologies. This study examines the use in a community pharmacy of a pharmaceutical 3D printer to auto-fill capsules and blisters using semisolid extrusion, incorporating an integrated quality control system.
View Article and Find Full Text PDFPublic Health
January 2025
Division of International Health (Public Health), Graduate School of Medical and Dental Sciences, Niigata University, Niigata, Japan; Institute for Research Administration, Niigata University, Niigata, Japan. Electronic address:
Objectives: Mumps (infectious parotitis) is an acute respiratory illness caused by the mumps virus in humans. While numerous studies have explored the impact of climate variability on mumps incidence in specific cities or regions, few have analyzed nationwide associations across multiple locations. This study aims to systematically assess the short-term effects of meteorological factors on mumps incidence across Japan over a 15-year period.
View Article and Find Full Text PDFPharmaceutics
December 2024
Escuela Superior de Medicina, Instituto Politécnico Nacional, Ciudad de México 11340, Mexico.
Curcumin appears to be well tolerated and effective for managing chronic inflammatory pain, but its poor oral bioavailability has been a hurdle in its use as a therapeutic agent. The current study was performed to characterize a novel co-amorphous compound based on curcumin/L-arginine 1:2 (CAC12). : Stability, solubility and structural characterization of the CAC12 were carried out by spectrometry techniques and in vitro assays, whereas the antinociceptive and anti-inflammatory effects were evaluated by CFA or carrageenan models.
View Article and Find Full Text PDFSensors (Basel)
January 2025
Department of Biomedical Engineering, Yonsei University, Wonju 26493, Republic of Korea.
This study presents the fabrication of a sustainable flexible humidity sensor utilizing chitosan derived from mealworm biomass as the primary sensing material. The chitosan-based humidity sensor was fabricated by casting chitosan and polyvinyl alcohol (PVA) films with interdigitated copper electrodes, forming a laminate composite suitable for real-time, resistive-type humidity detection. Comprehensive characterization of the chitosan film was performed using Fourier-transform infrared (FTIR) spectroscopy, contact angle measurements, and tensile testing, which confirmed its chemical structure, wettability, and mechanical stability.
View Article and Find Full Text PDFMaterials (Basel)
January 2025
Department of Civil Engineering, Laval University, Québec City, QC G1V 0A6, Canada.
Despite decades of extensive studies, the mechanism of concrete creep remains a subject of debate, mainly due to the complex nature of cement microstructure. This complexity is further amplified by the interplay between water and the cement microstructure. The present study aimed to better understand the creep mechanism through creep tests on microprisms of cement paste at hygral equilibrium.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!