Introduction: To improve the mechanization level of rice planting, a new type of direct seeding device for rice was designed. The device's structural properties will be crucial in determining its seeding performance. Structure optimization in the current seed metering device design process focuses on a single or few indexes, resulting in improved individual performance but imbalanced overall performance. Therefore, a structure optimization method of the direct seeding device based on a multi-index orthogonal experiment was proposed in this study.

Methods: First, the DEM-MBD coupling method observed the factors and levels that affected the performance overall. Second, a test platform based on the electric drive control model was constructed, and a multi-index orthogonal test was devised. Finally, the structural parameters of the seed metering devices were optimized based on matrix analysis.

Results: From the results, the primary and secondary levels of significance of factors were just as follows: hole diameter > hole number > adjustment angle. The following are the optimal parameters found by optimization analysis: the diameter of the hole was 12 mm, the number of holes was 10, and the adjustment angle was 80°. Validation tests were carried out and analyzed based on the optimal structural parameter combination. The qualification rate of seeds per hole, empty hole rate, average seed number, coefficient of variation of seed number, average hole spacing, and the variance coefficient of hole spacing are 93.07%, 0%, 9.39,14.04%, 22.84 cm, and 9.14%, respectively.

Discussion: In comparison to traditional design and structural parameter optimization methods for rice precision seed metering device, this study not just to provides an optimization scheme for improving the overall performance of rice precision seed metering device, but also serves as a technical reference for the development and design of new rice precision seed metering device.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10359481PMC
http://dx.doi.org/10.3389/fpls.2023.1183624DOI Listing

Publication Analysis

Top Keywords

seed metering
20
rice precision
16
metering device
16
multi-index orthogonal
12
precision seed
12
optimization method
8
device based
8
based multi-index
8
direct seeding
8
seeding device
8

Similar Publications

In order to address many issues, such as the inconsistent and unreliable seeding process in traditional mechanical garlic seed metering systems (SMS), as well as the lack of ability to monitor the effectiveness of the seeding, a highly accurate electric-driven metering system (EDMS) was developed and created specifically for garlic seed planters. This study provided a description of the overall structure and functioning principle, as well as an analysis of the mechanism for smooth transit and delivery. A combination of an infrared (IR) sensor, Arduino Mega board, stepper motor, speed sensor, and a Wi-Fi module was employed to operate the EDMS, as well as monitor and count the quantity of garlic seeds during the planting process and determine the qualified rate (QR) and missing rate (MR).

View Article and Find Full Text PDF

Herein, we present a distorted square pyramidal mercury complex, [Hg(L)Cl] (1), based on a quinoline-substituted formazan ligand LH[3-Cyano-1,5-(quinolin-8-yl)formazan], which was evaluated for its anti-bacterial activity in vitro. Complex 1 was prepared by refluxing 3-Cyano-1,5-(quinolin-8-yl)formazan ligand and mercury chloride(II) in equimolar quantity and was characterized utilizing a range of analytical methods, including single crystal X-ray diffraction (SCXRD) technique. The crystal packing in complex 1 has been elucidated using supramolecular investigations, which have shown the presence of fascinating Hg-Cl⋅⋅⋅Hg intermolecular spodium bonds of the order 3.

View Article and Find Full Text PDF

New Behavior Records of the Oxysternon palemo Castelnau, 1840 (Coleoptera: Scarabaeidae: Scarabaeinae) in Cerrado.

Neotrop Entomol

December 2024

Depto de Zoologia, Instituto de Ciências Biológicas, Univ de Brasília, Brasília, Distrito Federal, Brazil.

The present study reports new behavioral records for Oxysternon palemo Castelnau, 1840 in Cerrado. According to its nesting habits and resource allocation, this species of dung beetle is traditionally classified as coprophagous and paracoprid, transporting portions of dung through tunnels excavated below the resource. We observed a male individual moving a pequi seed (Caryocar brasiliensis Cambess.

View Article and Find Full Text PDF

Development of a cell-type cylindrical carrot seeder.

Heliyon

December 2024

Department of Agricultural Engineering and Safety, Faculty of Engineering, Agriculture Academy, Vytautas Magnus University, Studentu str. 15A, Akademija, LT-53362, Kaunas, Distr., Lithuania.

Accurate planting of the required number of carrot seeds is one of the important parameters in developing a carrot seeding device. This study developed a metering mechanism that promotes the deposition of <3 carrot seeds on each planting hill at negligible seed damage. The metering disc and hopper were especifically designed to ensure consistency and uniformity in seed loading into the seed cell and their subsequent efficient discharge onto the planting hills.

View Article and Find Full Text PDF

This study proposed a high-speed precision dual-chamber maize metering device for the dense planting pattern with standard ridge promoted in China. Through theoretical analysis of the sowing process, parameters for the key components have been designed. The metering device is capable of planting two rows in a single pass for high-speed precision seeding.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!