AI Article Synopsis

  • This study showcases a groundbreaking backward THz-wave parametric oscillator (BW-TPO) operating at 0.87 THz, utilizing a special type of periodically poled lithium niobate (PPLN) crystal for its nonlinear properties.
  • A sub-nanosecond pulsed laser at 1064.44 nm excites the PPLN, leading to the generation of THz and idler beams, with the first idler measuring 1067.75 nm, which corresponds to a frequency of 0.872 THz.
  • The researchers demonstrate the ability to tune the oscillator's frequency from 0.836 to 0.905 THz by adjusting the angle of the PPLN, while achieving a high

Article Abstract

We report the first demonstration of a frequency tunable backward THz-wave parametric oscillator (BW-TPO) centered at a high frequency of 0.87 THz using a slant-stripe-type magnesium oxide-doped periodically poled lithium niobate (PPLN) crystal as the nonlinear medium. Down-converted THz and idler beams generate upon excitation of the PPLN with a sub-nanosecond pulsed source of λ = 1064.44 nm. The resulting first idler has a wavelength of 1067.75 nm, equivalent to an oscillation frequency of 0.872 THz as per the spectral line separation from the pump. We also present angle tuning of the BW-TPO frequency ranging from 0.836-0.905 THz through PPLN rotation. The threshold pump intensity for BW-TPO is determined to be 5.6 GW/cm while obtaining a conversion efficiency as high as 12.3% at a pump energy (intensity) of 15.25 mJ (8.90 GW/cm). A reduction of the BW-TPO threshold energy and improved pump-to-idler energy conversion efficiency resulted from injection seeding with a CW laser at the same wavelength as the first idler. The THz output is also directly proportional to seed power.

Download full-text PDF

Source
http://dx.doi.org/10.1364/OE.494232DOI Listing

Publication Analysis

Top Keywords

tunable backward
8
parametric oscillator
8
centered high
8
high frequency
8
frequency 087
8
087 thz
8
injection seeding
8
conversion efficiency
8
thz
6
frequency
5

Similar Publications

A ridge-loaded staggered double-vane slow-wave structure is proposed for terahertz radiation sources employing a sheet electron beam. This slow-wave structure has the advantages of enhanced electric field and energy density distribution and improved interaction impedance in the beam-wave interaction region. High-frequency characteristics are investigated for the proposed slow wave structure and compared with those of the staggered double-vane slow wave structure.

View Article and Find Full Text PDF

In this paper, a kind of plasma metastructures-photonic crystals (PMPC) structure is proposed to investigate the absorption and transmission properties of electromagnetic waves (EWs) incident from opposite directions. The results show that the PMPC can achieve a dual-channel asymmetric absorption-transmission (AAT) phenomenon. At an operating bandwidth (OB) of 2.

View Article and Find Full Text PDF

Two-wave mixing between forward- and backward-propagating signal light has recently been observed in frequency-modulated single-frequency fiber laser systems. The phenomenon is a potential limiting factor for power scaling of such frequency-tunable lasers. In this contribution, we derive a perturbative coupled-mode theory for two signals that counter-propagate in an Yb-doped fiber with a constant frequency detuning.

View Article and Find Full Text PDF

Strain-Induced Tunable and Field-Free Spintronic THz Emitters Based on Flexible Substrate Heterostructures.

ACS Appl Mater Interfaces

October 2024

Hefei National Research Center for Physical Sciences at the Microscale & Anhui Laboratory of Advanced Photon Science and Technology, University of Science and Technology of China, Hefei 230026, China.

Spintronic THz emitters have been widely studied due to their advantages of broadband frequency, high efficiency, and easy fabrication. The spintronic THz signal is proportional to the magnetization of the ferromagnetic (FM) layer and requires an external magnetic field to maximize the THz signal intensity. Recently, a field-free emitter was designed based on a CoFeB/IrMn heterostructure via the exchange bias between two films.

View Article and Find Full Text PDF

Programmable adhesion through triangular and hierarchical cuts in metamaterial adhesives.

Philos Trans A Math Phys Eng Sci

October 2024

Mechanical Engineering, Soft Materials and Structures Lab, Virginia Tech, Blacksburg VA 24061, USA.

Metamaterial design approaches, which integrate structural elements into material systems, enable the control of uncommon behaviours by decoupling local and global properties. Leveraging this conceptual framework, metamaterial adhesives incorporate nonlinear cut architectures into adhesive films to achieve unique combinations of adhesion capacity, release, and spatial tunability by controlling how cracks propagate forward and in reverse directions during separation. Here, metamaterial adhesive designs are explored with triangular cut features while integrating hierarchical and secondary cut patterns among primary nonlinear cuts.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!