Background: Is abrasive blasting accompanied by the phenomenon of driving abrasive particles into the conditioned material?
Methods: Three hundred and fifteen cylindrical disks of three types of metal alloy (chromium/cobalt, chromium/nickel, titanium, and sintered zirconium dioxide) were divided into four groups (n = 35) and sandblasted at pressures of 0.2, 0.4, or 0.6 MPa with aluminum oxide (AlO), grain size 50, 110, or 250 μm. Then, the surface topography was examined using a scanning microscope, and the amount of embedded grain was measured using quantitative metallography. For each group, five samples were randomly selected and subjected to Vickers hardness testing. In the statistical analyses, a three-factor analysis of variance was carried out, considering the type of material, the size of gradation of the abrasive, and the amount of pressure.
Results: The smallest amounts of embedded abrasive (2.62) were observed in the ZrO treatment, and the largest (38.19) occurred in the treatment of the Ti alloy. An increase in the gradation and the pressure were a systematic increase in the amount of embedded grain.
Conclusions: After abrasive blasting, abrasive particles were found on the surface of the materials. The amount of driven abrasive depends on the hardness of the processed material.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10343725 | PMC |
| http://dx.doi.org/10.3390/ma16134783 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Study on the Abrasive Blasting Mechanism of Solder Welded 304V Wire in Vascular Intervention.
Micromachines (Basel)
November 2024
Department of Vascular Surgery, General Surgery Clinical Center, Shanghai General Hospital, Shanghai Jiao Tong University School of Medicine, 100 Haining Road, Shanghai 200080, China.
The solder burrs on the 304V wire surface can easily scratch the vascular tissue during interventional treatment, resulting in complications such as medial tears, bleeding, dissection, and rupture. Abrasive blasting is often used to remove solder burr and obtain a smooth surface for the interventional device. This study conducted an abrasive blasting experiment to explore the effects of process parameters (air pressure, lift-off height, abrasive volume, and abrasive type) on processing time, surface roughness, and mechanical properties to reveal the material removal mechanism.
View Article and Find Full Text PDFInfluence of Laser Micro-Texturing and Plasma Treatment on Adhesive Bonding Properties of WC-Co Carbides with Steel.
Materials (Basel)
December 2024
Department of Metal Forming, Welding and Metrology, Faculty of Mechanical Engineering, Wroclaw University of Science and Technology, 50-370 Wrocław, Poland.
This article presents research on advanced surface preparation methods for sintered carbides (WC-Co, grade B2) commonly used in the tool industry, particularly in the context of bonding these materials with C45 steel using adhesives. Sintered carbides are widely used due to their high hardness, wear resistance, and good ductility, making them ideal for manufacturing tools operating in harsh conditions. Traditional bonding methods, such as brazing and welding, often result in stresses and cracks.
View Article and Find Full Text PDFClinical efficacy of based herbal mouthwash in treating the hypersensitivity of teeth.
Pak J Med Sci
November 2024
Khadim Hussain, Statistical Analysist, Department of Statistics, Islamia University, Bahawalpur, Pakistan.
Article Synopsis
- - The study aimed to assess the effectiveness of an Azadirachta indica-based herbal mouthwash in reducing tooth sensitivity among 120 participants over one month.
- - Participants' tooth sensitivity was measured using the Visual Analog Scoring (VAS) tool before and after using the mouthwash, revealing a significant reduction from 55.43% to 35.38%.
- - The results indicated that the herbal mouthwash significantly improved tooth sensitivity, highlighting its potential as a treatment option.
Gandhak Potash Blast: An Actual Sitting Over the Powder Keg-A Case Report.
Acad Forensic Pathol
March 2024
An explosive is a container that is filled with material that will explode when it is thrown or dropped, or when a device inside it makes it explode. Many materials can be used in making up of a bomb individually or when mixed with some other chemical. The type of explosive that gets misused most commonly are those used in manufacturing and other commercial applications due to their easy accessibility to public.
View Article and Find Full Text PDFEffect of cement type, luting protocol, and ceramic abutment material on the shade of cemented titanium-based lithium disilicate crowns and surrounding peri-implant soft tissue: a spectrophotometric analysis.
J Adv Prosthodont
August 2024
Department of Postgraduate Education, Center for Dentistry and Oral Medicine (Carolinum), University Hospital, Goethe University Frankfurt, Frankfurt am Main, Germany.
Purpose: The objective of the study was to analyze the impact of cement, bonding pretreatment, and ceramic abutment material on the overall color results of CAD-CAM ceramic crowns bonded to titanium-based hybrid abutments.
Materials And Methods: For single implant restoration of a maxillary lateral incisor a total of 51 CAD-CAM-fabricated monolithic lithium disilicate crowns were fabricated and subsequently bonded onto 24 lithium disilicate Ti-base abutments, 24 zirconia Ti-base abutments and 3 resin abutment replicas as a control group. The 48 copings were cemented with three definitive and one provisional cement on both grit-blasted and non-blasted Ti-bases.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!