In this work, we propose, for the first time, a simple, fast, and efficient strategy to fabricate high-performance rigid crosslinked PVC composites by continuous extrusion. This strategy improves the poor processing fluidity of composites and solves the impossibility of conducting extrusion in one step via using microcapsule-type crosslinking agents prepared by in situ polymerization to co-extrude with PVC blends. The results demonstrate that the PVC/microcapsule composites were successfully prepared. Within the studied parameters, the properties of crosslinked PVC gradually increased with the addition of microcapsules, and its Vicat softening temperature increased from 79.3 °C to 86.2 °C compared with pure PVC. This study shows the possibility for the industrial scale-up of the extrusion process for rigid crosslinked PVC.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10342326 | PMC |
| http://dx.doi.org/10.3390/ma16134600 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Fabrication of PVA-PVC composite membrane for enhanced TDS removal from tannery effluent: sustainable water treatment approach.
Environ Sci Pollut Res Int
December 2024
Department of Chemical Engineering, Faculty of Engineering, Jazan University, 11451, Jazan, Saudi Arabia.
The environmental burden of tannery wastewater, characterized by high levels of total dissolved solids (TDS) and other contaminants, presents a significant challenge for sustainable water management. This study addresses this issue by developing a novel polyvinyl alcohol (PVA) and polyvinyl chloride (PVC) composite membrane optimized for efficient TDS removal from tannery effluent. The membrane was fabricated using a solution casting technique, with glutaraldehyde employed as a crosslinking agent to enhance mechanical properties and stability.
View Article and Find Full Text PDFNanomolar detection of lurasidone hydrochloride in pharmaceutical formulations (Serodopamoun®) and spiked urine using a PVC/imprinted polymer/MWCNTs layer deposited onto polyaniline-coated screen-printed electrodes.
RSC Adv
December 2024
Department of Chemistry, Faculty of Science, Cairo University 12613 Giza Egypt
This study developed potentiometric sensors for detecting lurasidone HCl (LSH), a vital drug for treating schizophrenia and bipolar I disorder, in pharmaceutical formulations and biological samples. The sensors are based on screen-printed electrodes (SPE) modified with a molecularly imprinted polymer (MIP) synthesized using lurasidone as a template, 1-vinyl-2-pyrrolidine (VP) as a functional monomer, ethylene glycol dimethacrylate (EGDMA) as a crosslinker, and benzoyl peroxide as an initiator. The SPE was further modified with a conductive polyaniline (PANI) film and a polyvinyl chloride (PVC) layer containing MIP as an ionophore and multiwalled carbon nanotubes (MWCNT) as a transducing material along with 2-nitrophenyl octyl ether (2-NPOE) as plasticizer.
View Article and Find Full Text PDFVisualized and pH-responsive hydrogel antibacterial coating for ventilator-associated pneumonia.
Biomed Pharmacother
September 2024
Shenzhen Center for Disease Control and Prevention, Shenzhen 518055, China; Guangdong Provincial Key Laboratory of Pharmaceutical Bioactive Substances, School of Basic Medical Sciences, Guangdong Pharmaceutical University, Guangzhou 510006, China. Electronic address:
Ventilator-associated pneumonia (VAP) is a common healthcare-acquired infection often arising during artificial ventilation using endotracheal intubation (ETT), which offers a platform for bacterial colonization and biofilm development. In particular, the effects of prolonged COVID-19 on the respiratory system. Herein, we developed an antimicrobial coating (FK-MEM@CMCO-CS) capable of visualizing pH changes based on bacterial infection and releasing meropenem (MEM) and FK13-a1 in a controlled manner.
View Article and Find Full Text PDFEnhanced UV Penetration and Cross-Linking of Isoporous Block Copolymer and Commercial Ultrafiltration Membranes using Isorefractive Solvent.
Adv Sci (Weinh)
September 2024
Institute of Membrane Research, Helmholtz-Zentrum Hereon, Max-Planck-Str.1, 21502, Geesthacht, Germany.
Amphiphilic block copolymers are promising candidates for the fabrication of ultrafiltration membranes with an isoporous integral asymmetric structure. The membranes are typically fabricated by the combination of block copolymer self-assembly and the non-solvent-induced phase separation (SNIPS) process resulting in isoporous integral asymmetric membranes. Certainly, all these membranes lack thermal and chemical stability limiting the usage of such materials.
View Article and Find Full Text PDFPreparation and Properties of Epoxy Adhesives with Fast Curing at Room Temperature and Low-Temperature Resistance.
ACS Omega
May 2024
Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Chemical Engineering, Nanjing Forestry University, Nanjing 210037, China.
Developing a highly efficient multifunctional epoxy adhesive is still an enormous challenge, which can rapidly cure at room temperature and has excellent low-temperature resistance performance and is crucial for the epoxy adhesive and electrical sealing fields during severe cold seasons. Herein, diglycidyl phthalate (DP) was synthesized with phthalic anhydride (PA) and epichlorohydrin (ECH) to enhance the curing rate and low-temperature resistance of bisphenol A diglycidyl ether (DGEBA) adhesive. The modified DP/DGEBA adhesives were systematically analyzed by gel time, mechanical properties, and aging resistance (time, temperature, and dry/wet treatment).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!