Bioelectrical impedance analysis (BIA) was established to quantify diverse cellular characteristics. This technique has been widely used in various species, such as fish, poultry, and humans for compositional analysis. This technology was limited to offline quality assurance/detection of woody breast (WB); however, inline technology that can be retrofitted on the conveyor belt would be more helpful to processors. Freshly deboned ( = 80) chicken breast fillets were collected from a local processor and analyzed by hand-palpation for different WB severity levels. Data collected from both BIA setups were subjected to supervised and unsupervised learning algorithms. The modified BIA showed better detection ability for regular fillets than the probe BIA setup. In the plate BIA setup, fillets were 80.00% for normal, 66.67% for moderate (data for mild and moderate merged), and 85.00% for severe WB. However, hand-held BIA showed 77.78, 85.71, and 88.89% for normal, moderate, and severe WB, respectively. Plate BIA setup is more effective in detecting WB myopathies and could be installed without slowing the processing line. Breast fillet detection on the processing line can be significantly improved using a modified automated plate BIA.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9601423 | PMC |
http://dx.doi.org/10.3390/foods11203270 | DOI Listing |
Microbiol Spectr
October 2024
i3S-Instituto de Investigação e Inovação e Saúde, Universidade do Porto, Porto, Portugal.
Polymers (Basel)
June 2023
INRAE, Research Unit BIA UR1268, 3, Impasse Yvette Cauchois, 44316 Nantes, France.
This study aims at better understanding the damage and fracture kinetics in flax fibre elements at both the unitary and bundle scales, using an experimental setup allowing optical observation at high recording rate in the course of tensile loading. Defects and issues from flax unitary fibre extraction are quantitated using polarized light microscopy. Tensile loading is conducted according to a particular setup, adapted to fibres of 10 to 20 µm in diameter and 10 mm in length.
View Article and Find Full Text PDFFoods
October 2022
Department of Poultry Science, Auburn University, Auburn, AL 36849, USA.
Bioelectrical impedance analysis (BIA) was established to quantify diverse cellular characteristics. This technique has been widely used in various species, such as fish, poultry, and humans for compositional analysis. This technology was limited to offline quality assurance/detection of woody breast (WB); however, inline technology that can be retrofitted on the conveyor belt would be more helpful to processors.
View Article and Find Full Text PDFInt J Biol Macromol
August 2023
INRAE, UR 1268 BIA, 44316 Nantes, France.
Model systems are needed to provide controlled environment for the understanding of complex phenomena. Interaction between polysaccharides and proteins in dense medium are involved in numerous complex systems such as biomass conversion or plant use for food processing or biobased materials. In this work, cellulose nanocrystals (CNCs) were used to study proteins in a dense and organized cellulosic environment.
View Article and Find Full Text PDFPhysiol Meas
April 2021
Institute of Biomedical Technologies, Auckland University of Technology, Auckland, New Zealand.
Recent advances in hemodynamic monitoring have seen the advent of non-invasive methods which offer ease of application and improve patient comfort. Bioimpedance Analysis or BIA is one of the currently employed non-invasive techniques for hemodynamic monitoring. Impedance Cardiography (ICG), one of the implementations of BIA, is widely used as a non-invasive procedure for estimating hemodynamic parameters such as stroke volume (SV) and cardiac output (CO).
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!