The dataset contains raw data gathered with the ultrasonic pulse-echo method on concrete specimens. The surfaces of the measuring objects were automatically scanned point by point. Pulse-echo measurements were performed at each of these measuring points. The test specimens represent two typical testing tasks in construction industry: the detection of objects and the determination of dimensions to describe the geometry of components. By automating the measurement process, the different test scenarios are examined with a high repeatability, precision and measuring point density. Longitudinal and transversal waves were used and the geometrical aperture of the testing system was varied. The low-frequency probes operate in a range of up to approximately 150 kHz. In addition to the specification of the geometrical dimensions of the individual probes, the directivity pattern and the sound field characteristics are provided. The raw data are stored in a universally readable format. The length of each time signal (A-scan) is two milliseconds and the sampling rate is two mega-samples per second. The provided data can be used for comparative studies in signal analysis, imaging and interpretation as well as for evaluation purposes in different, practically relevant testing scenarios.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10294002 | PMC |
| http://dx.doi.org/10.1016/j.dib.2023.109233 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
High sound pressure piezoelectric micromachined ultrasonic transducers using sputtered potassium sodium niobate.
Microsyst Nanoeng
December 2024
Department of Mechanical Engineering, University of California, Berkeley, CA, 94720, USA.
This work presents air-coupled piezoelectric micromachined ultrasonic transducers (pMUTs) with high sound pressure level (SPL) under low-driving voltages by utilizing sputtered potassium sodium niobate KNaNbO (KNN) films. A prototype single KNN pMUT has been tested to show a resonant frequency at 106.3 kHz under 4 V with outstanding characteristics: (1) a large vibration amplitude of 3.
View Article and Find Full Text PDFOnline detection and evaluation of early fatigue cracks using sideband peak intensity technique with frequency-mismatched excitation pulse-echo method.
Ultrasonics
December 2024
Department of Civil and Architectural Engineering and Mechanics, University of Arizona, Tucson, AZ 85721, USA.
This work presents a nonlinear ultrasonic (NLU) technique called sideband peak intensity (SPI) combining an improved pulse-echo (PE) experimental method for online detection and evaluation of fatigue cracks at their early stages. Advantages of the proposed technique are that it enjoys the high sensitivity and ease of application of NLU SPI technique and easy implementation of the PE experimental method. The PE experimental method is improved by adopting frequency-mismatched excitations to enhance the sensitivity and robustness of the SPI technique.
View Article and Find Full Text PDFUnique Characteristics of Pulse-Echo Sensing Systems for Ultrasonic Immersion Testing in Harsh Environments.
Sensors (Basel)
December 2024
Department of Engineering Science and Mechanics, Penn State, University Park, PA 16802, USA.
Ultrasound is an excellent way to acquire data that reveal useful information about systems operating in harsh environments, which may include elevated temperature, ionizing radiation, and aggressive chemicals. The effects of harsh environments on piezoelectric materials have been studied in much more depth than the other aspects of ultrasonic transducers used in pulse-echo mode. Therefore, finite element simulations and laboratory experiments are used to demonstrate the unique characteristics of pulse-echo immersion testing.
View Article and Find Full Text PDFTransparent ultrasonic transducers based on relaxor ferroelectric crystals for advanced photoacoustic imaging.
Nat Commun
December 2024
Electronic Materials Research Laboratory, Key Lab of Education Ministry and State Key Laboratory for Mechanical Behavior of Materials, School of Electronic Science and Engineering, Xi'an Jiaotong University, Xi'an, China.
Article Synopsis
- - Photoacoustic imaging is a non-invasive technique useful for research and clinical diagnosis, but achieving high resolution and fast frame rates is difficult.
- - A new transparent ultrasonic transducer design using advanced piezoelectric materials has been developed to improve image quality, achieving a frequency of 28.5 MHz and a significant increase in sensitivity—four times better than existing options.
- - This innovation allows for improved monitoring of microvasculature in the brain during seizures, with enhanced signal-to-noise ratios, potentially advancing the effectiveness of photoacoustic imaging systems.
Spiral volumetric optoacoustic and ultrasound (SVOPUS) tomography of mice.
Photoacoustics
December 2024
Institute of Pharmacology and Toxicology and Institute for Biomedical Engineering, Faculty of Medicine, University of Zurich, Zurich CH-8057, Switzerland.
Optoacoustic (OA) tomography is a powerful noninvasive preclinical imaging tool enabling high resolution whole-body visualization of biodistribution and dynamics of molecular agents. The technique yet lacks endogenous soft-tissue contrast, which often hampers anatomical navigation. Herein, we devise spiral volumetric optoacoustic and ultrasound (SVOPUS) tomography for concurrent OA and pulse-echo ultrasound (US) imaging of whole mice.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!