Several diseases and injuries cause irreversible damage to bone tissues, which may require partial or total regeneration or replacement. Tissue engineering suggests developing substitutes that may contribute to the repair or regeneration process by using three-dimensional lattices (scaffolds) to create functional bone tissues. Herein, scaffolds comprising polylactic acid and wollastonite particles enriched with propolis extracts from the Arauca region of Colombia were developed as gyroid triply periodic minimal surfaces using fused deposition modeling. The propolis extracts exhibited antibacterial activity against (ATCC 25175) and (ATCC 12228), which cause osteomyelitis. The scaffolds were characterized using scanning electron microscopy, Fourier-transform infrared spectroscopy, differential scanning calorimetry, contact angle, swelling, and degradation. Their mechanical properties were assessed using static and dynamic tests. Cell viability/proliferation assay was conducted using hDP-MSC cultures, while their bactericidal properties against monospecies cultures ( and ) and cocultures were evaluated. The wollastonite particles did not affect the physical, mechanical, or thermal properties of the scaffolds. The contact angle results showed that there were no substantial differences in the hydrophobicity between scaffolds with and without particles. Scaffolds containing wollastonite particles suffered less degradation than those produced using PLA alone. A representative result of the cyclic tests at F = 450 N showed that the maximum strain reached after 8000 cycles is well below the yield strain (i.e., <7.5%), thereby indicating that even under these stringent conditions, these scaffolds will be able to work properly. The scaffolds impregnated with propolis showed a lower % of cell viability using hDP-MSCs on the 3rd day, but these values increased on the 7th day. These scaffolds exhibited antibacterial activity against the monospecies cultures of and and their cocultures. The samples without propolis loads did not show inhibition halos, whereas those loaded with EEP exhibited halos of 17.42 ± 0.2 mm against and 12.9 ± 0.5 mm against . These results made the scaffolds possible bone substitutes that exert control over species with a proliferative capacity for the biofilm-formation processes required for typical severe infectious processes.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10301083 | PMC |
http://dx.doi.org/10.3390/polym15122629 | DOI Listing |
Int J Nanomedicine
December 2024
Department of Pharmaceutical Engineering, Dankook University, Cheonan, South Korea.
Purpose: This study aimed to develop a solid self-nanoemulsifying drug delivery system (SNEDDS) and surface-coated microspheres to improve the oral bioavailability of niclosamide.
Methods: A solubility screening study showed that liquid SNEDDS, prepared using an optimized volume ratio of corn oil, Cremophor RH40, and Tween 80 (20:24:56), formed nanoemulsions with the smallest droplet size. Niclosamide was incorporated into this liquid SNEDDS and spray-dried with calcium silicate to produce solid SNEDDS.
Proc Natl Acad Sci U S A
December 2024
Civil and Environmental Engineering Department, Northwestern University, Evanston, IL 60208.
Le Chatelier in 1887 and Powers in 1947 demonstrated that the volume of nanoscale C-S-H (calcium silicate hydrate) particles formed during hydration is smaller than the combined volume of the reactants-the anhydrous Portland cement and water. Hydration has thus been considered as contractive. An experiment shows that the opposite is true above the nanoscale.
View Article and Find Full Text PDFMaterials (Basel)
November 2024
School of Maritime and Civil Engineering, Zhejiang Ocean University, Zhoushan 316022, China.
This study aims to develop the marine geo-polymer cement that was produced with seawater, recycled particles from paste, recycled particles from glass, and alkaline activators, including NaOH or NaO·3.3SiO. The physicochemical properties and strength of MGPC were investigated with a Uniaxial Compression Test, Particle Size Analysis, Energy Dispersive Spectrometer, X-ray Diffraction, and Thermal-field Emission Scanning Electron Microscopy.
View Article and Find Full Text PDFMaterials (Basel)
October 2024
Department of Engineering, University of Campania "Luigi Vanvitelli", Via Roma 29, 81031 Aversa, Italy.
Alkali activated materials (AAMs) offer significant advantages over traditional materials like Portland cement, but require the use of strong alkaline solutions, which can have negative environmental impacts. This study investigates the synthesis of AAMs using metakaolin and wollastonite, aiming to reduce environmental impact by eliminating sodium silicate and using only sodium hydroxide as an activator. The hypothesis is that wollastonite can provide the necessary silicon for the reaction, with calcium from wollastonite potentially balancing the negative charges usually countered by sodium in the alkaline solution.
View Article and Find Full Text PDFJ Mater Sci Mater Med
September 2024
Department of Biomaterials and Tissue Engineering, School of Advanced Technologies in Medicine, Isfahan University of Medical Sciences, Isfahan, Iran.
Tissue engineering scaffolds are three-dimensional structures that provide an appropriate environment for cellular attachment, proliferation, and differentiation. Depending on their specific purpose, these scaffolds must possess distinct features, including appropriate mechanical properties, porosity, desired degradation rate, and cell compatibility. This investigation aimed to fabricate a new nanocomposite scaffold using a 3D printing technique composed of poly(ε-caprolactone) (PCL)/Gelatin (GEL)/ordered mesoporous calcium-magnesium silicate (om-CMS) particles.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!