Assessment of biodegradability of cellulose and poly(butylene succinate)-based bioplastics under mesophilic and thermophilic anaerobic digestion with a view towards biorecycling.

Despite the increasing interest in bioplastics, there are still contradictory results on their actual biodegradability, which cause difficulties in choosing and developing appropriate sustainable treatment methods. Two biofoils (based on poly(butylene succinate) (PBS) and cellulose (Cel)) were anaerobically degraded during 100-day mesophilic (37 °C) and thermophilic (55 °C) tests (PBS, Cel). To overcome low degradation rates in mesophilic conditions, alkaline pre-treatment was also used (Pre-PBS, Pre-Cel). For comprehensive understanding of biodegradability, not only methane production (MP), but also the structure (topography, microscopic analysis), tensile properties, and FTIR spectra of the materials undergoing anaerobic degradation (AD) analysed. PBS and Pre-PBS were visible in 100-day degradation, and the cumulative MP reached 25.5 and 29.3 L/kg VS, respectively (4.3-4.9% of theoretical MP (TMP)). The biofoils started to show damage, losing their mechanical properties over 35 days. In contrast, PBS was visible for 14 days (cracks and fissures appeared), cumulative MP was 180.2 L/kg VS (30.2% of the TMP). Pieces of Cel were visible only during 2 days of degradation, and the MP was 311.4-315.0 L/kg VS (77.3-78.2% of the TMP) at 37 °C and 319.5 L/kg VS (79.3% of the TMP) at 55 °C. The FTIR spectra of Cel and PBS did not show shifts and formation of peaks. These findings showed differences in terms of the actual biodegradability of the bioplastics and provided a deeper understanding of their behaviour in AD, thus indicating limitations of AD as the final treatment of some materials, and also may support the establishment of guidelines for bioplastic management.