Characterizing lesion morphology of a novel diamond-tip temperature-controlled irrigated radiofrequency ablation catheter.

Background: The DiamondTemp ablation (DTA) system is a novel temperature-controlled irrigated radiofrequency (RF) ablation system that accurately measures tip-tissue temperatures for real-time power modulation. Lesion morphologies from longer RF durations with the DTA system have not been previously described. We sought to evaluate lesion characteristics of the DTA system when varying the application durations.

Methods: A bench model using porcine myocardium was used to deliver discrete lesions in a simulated clinical environment. The DTA system was power-limited at 50 W with temperature set-points of 50 °C and 60 °C (denoted Group_50 and Group_60). Application durations were randomized with a range of 5-120 s.

Results: In total, 280 applications were performed. Steam pops were observed in five applications: two applications at 90 s and three applications at 120 s. Lesion size (depth and maximum width) increased significantly with longer applications, until 60 s for both Group_50 and Group_60 (depth: 4.5 ± 1.2 mm and 5.6 ± 1.3 mm; maximum width: 9.3 ± 2.7mm and 11.2 ± 1.7mm, respectively). As lesions transition from resistive to conductive heating (longer than 10 s), the maximum width progressed in a sub-surface propagation. Using a "Time after Temperature 60 °C" (TaT) analysis, depths of 2-3 mm occur in 0-5 s and depths plateau at 4.6 ± 0.8 mm between 20 and 30 s.

Conclusions: The DTA system rapidly creates wide lesions with lesion depth increasing over time with application durations up to 60 s. Using a TaT approach is a promising ablation guidance that would benefit from further investigation.