The inadequacy of the existing research in characterizing the atomization performance of the whole atomization field by the local region at nozzle axis hinders the improvement of dust removal performance of a spray system, especially for fan-shaped nozzles with large atomization angle. To solve this inadequacy, 88 measuring points were designed in this study to reveal the spatial distribution characteristics of atomization parameters of a fan-shaped pressure atomization nozzle using a 3D Fiber Phase-Doppler Anemometer. Moreover, the atomization performance and dust removal performance of the whole atomization field under different spray pressures were characterized. The results showed that the spatial distribution of atomization parameters in the axis and radial direction of the nozzle was inhomogeneous. As the axial distance from the nozzle outlet increased, the average droplet size showed a trend of first decreasing and then increasing, the proportion of the droplet of 15-70 μm showed a trend of first increasing and then decreasing, while the average droplet velocity and droplet flux showed a decreasing trend. In addition, the spray orientation was perpendicular to gravity, and the atomization field was parallel to gravity, resulting in a significant difference in the average droplet size between the upper region and the axis. Compared with the upper and lower regions, the atomization effect at the axis was superior, manifested by higher average droplet velocity and droplet flux, indicating that characterizing nozzle atomization performance with atomization parameters at the axis will lead to overestimation. The increase of spray pressure can improve atomization performance and dust removal efficiency to a certain extent, but the improvement effect had a limit. The atomization field can be divided into atomization region, expansion region and contraction region, and the expansion region was considered as an effective dust removal region. These findings provide reference for the design and operation of a spray system.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.scitotenv.2023.164994 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Performance Restoration of Chemically Recycled Carbon Fibres Through Surface Modification with Sizing.
Polymers (Basel)
December 2024
Research Lab of Advanced, Composite, Nano-Materials and Nanotechnology (R-NanoLab), School of Chemical Engineering, National Technical University of Athens, 9 Heroon Polytechniou, GR-15773 Athens, Greece.
The recycling of Carbon Fibre-Reinforced Polymers (CFRPs) is becoming increasingly crucial due to the growing demand for sustainability in high-performance industries such as automotive and aerospace. This study investigates the impact of two chemical recycling techniques, chemically assisted solvolysis and plasma-enhanced solvolysis, on the morphology and properties of carbon fibres (CFs) recovered from end-of-life automotive parts. In addition, the effects of fibre sizing are explored to enhance the performance of the recycled carbon fibres (rCFs).
View Article and Find Full Text PDFStudy on wettability of water stemming for blasting dust adjusted by surfactants and inorganic salts.
R Soc Open Sci
January 2025
State Key Laboratory of Precision Blasting, Jianghan University, Wuhan 430056, People's Republic of China.
Water stemming is an efficient method of removing blasting dust by wetting. There is still a lack of methods for rapid optimization of water stemming components with high wettability. Herein, blasting dust was collected from a tunnel in Chongqing (China) to investigate its removal performance by different water stemmings.
View Article and Find Full Text PDFCo-gasification of blast furnace dust with petcoke for sustainable waste management.
Waste Manag
December 2024
Department of Mineral Processing, CSIR-IMMT, Bhubaneswar, Odisha 751013, India. Electronic address:
This study employed a lab-scale fluidized bed steam gasification setup to perform the co-gasification experiments with blast furnace dust (BFD) and petcoke (PC) - wastes from the steel and refining industries, respectively. Multiple experiments were conducted at the optimized conditions to decipher the effects of the mineralogical content of the feed samples on the gasification performance parameters. With the addition of iron and zinc-abundant BFD sample to PC, an effective enhancement in the ability of the gasifier to produce hydrogen-rich synthesis gas was observed, attributed to an increase in surface active sites for gasification reactivity.
View Article and Find Full Text PDFNovel flame retardants (NFRs) in e-waste: Environmental burdens, health implications, and recommendations for safety assessment and sustainable management.
Toxicology
December 2024
Helmholtz Centre for Environmental Research - UFZ, Department Ecotoxicology, Leipzig, Germany; Entity of In Vitro Toxicology and Dermato-Cosmetology, Department of Pharmaceutical and Pharmacological Sciences, Faculty of Medicine and Pharmacy, Vrije Universiteit Brussel, Brussels, Belgium.
Novel flame retardants (NFRs) have emerged as chemicals of environmental health concern due to their widespread use as an alternative to polybrominated diphenyl ethers (PBDE) in electrical and electronic devices. Humans and ecosystems are under threat because of e-waste recycling procedures that may emit NFRs and other anthropogenic chemicals into the e-waste workplace and the surrounding environment. The individual toxicity of NFRs including novel brominated flame retardants (NBFRs), their combined effects and the underlying mechanisms of toxicity have remained poorly understood.
View Article and Find Full Text PDFSelf-crystal electret poly(lactic acid) nanofibers for high-flow air purification and AI-assisted respiratory diagnosis.
J Hazard Mater
December 2024
School of Materials Science and Physics, China University of Mining and Technology, Xuzhou 221116, China; Jiangsu Engineering Research Center of Dust Control and Occupational Protection, Xuzhou 221008, China; College of Polymer Science and Engineering, State Key Laboratory of Polymer Materials Engineering, Chengdu 610065, China. Electronic address:
Particulate matters (PMs), one of the major airborne pollutants, continue to seriously threaten human health and the environment. Here, a self-crystal-induced electret enhancement (SCIEE) strategy was developed to promote the in-situ electret effect and polarization properties of electrospun poly(L-lactic acid) (PLLA) nanofibers. The strategy specifically involved the elaborate pre-structuring of stereocomplex crystals (SCs) with uniform dimensions (∼300 nm), which were introduced into PLLA electrospinning solution as the electrets and physical cross-linking points of high density.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!